Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: 2014 Jetta TDI - INSPEC and SRI

  1. #11
    Verified VCDS User
    Join Date
    Jun 2014
    Location
    London ON
    Posts
    8
    Post Thanks / Like
    You rock! Thanks for the quick replies. Problem solved.

  2. Likes Uwe, Dana liked this post
  3. #12
    Ross-Tech Employee Dana's Avatar
    Join Date
    Jan 2014
    Location
    United States
    Posts
    3,434
    Post Thanks / Like
    It looks like the Distance and Time based Service scheme so this A6 page may be helpful:

    http://wiki.ross-tech.com/wiki/index...rument_Cluster

    At some point please try resetting all 3 channels:

    1) ESI: Resetting ESI
    2) FIX: Distance covered since last mileage-dependent inspection
    3) FIX: Time since last time-dependent inspection

    .. and check to see if either ESI: Time from inspection and ESI: Distance driven from inspection channel happen to zero after a key cycle. If they do not zero out please let us know if entering a new value of 0 in each of those resolves this.

    Edit. I missed that update but make sure all 3 resets were completed so you don't have to deal with that anytime soon

  4. Likes Stdenis25 liked this post
  5. #13
    Verified VCDS User
    Join Date
    Jun 2014
    Location
    London ON
    Posts
    8
    Post Thanks / Like
    that page you posted is great. Exactly what I needed to do from the start.
    Thanks!

  6. Likes Dana liked this post
  7. #14
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    22,967
    Post Thanks / Like
    Blog Entries
    1
    Yeah, but without seeing the channel map first, it wasn't obvious that VW was now using that same scheme.

    -Uwe-

  8. Likes victor35ma liked this post
  9. #15
    Ross-Tech Employee Dana's Avatar
    Join Date
    Jan 2014
    Location
    United States
    Posts
    3,434
    Post Thanks / Like
    Yeah Uwe, we would have been guessing for a while without it I assumed London was RoW but that is a Canadian market car using what I would describe as a RoW service scheme! Build date of 14.08.2013 so it is new but it wasn't built yesterday so we are going to see more of these inquiries real soon.


    Update. After further research I added the additional steps to the Mk6 Golf chassis cluster page.

    The PR codes from this Canadian (km) VIN are:
    Service indicator QI4 Service indicator 15000 km or 1 year ( fix )
    Service interval prolongation QG0 Without service interval prolongation

    The PR Codes from a 2014 US (mile) VIN with similar control module map channels are:
    Service indicator QI7 Service indicator ( 10000 miles )
    Service interval prolongation QG0 Without service interval prolongation
    Last edited by Dana; 08-22-2014 at 08:38 AM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •