Updated to Release 23.11 and Having Trouble? Read This Thread

   #41  

Mike@Gendan

VCDS Distributor
VCDS Distributor
Joined
Jun 24, 2014
Messages
867
Reaction score
1,078
Location
Swansea, UK
VCDS Serial number
C?ID=57030
....
4) Start up VCDS (it may have already started at the end of the installation, which is fine). If VCDS won't start up at all after updating, make sure that Zone Alarm or your virus scanner are not blocking/quarantining the file. Make sure it says Release 18.9 at the top of the screen. If says an older version then something didn't go right. Check the shortcut on your desktop to make sure it's for Release 19.6. If needed, exit out of VCDS then repeat steps 1-3.
...
I'm guessing that should be 19.6 now?
 
  • Like
Reactions: Uwe
   #43  

bobbik

Verified VCDS User
Verified
Joined
Oct 9, 2015
Messages
21
Reaction score
5
Location
Poland
VCDS Serial number
C?ID=50728
Code:
Thursday,18,July,2019,11:33:50:22340
VCDS -- Windows Based VAG/VAS Emulator Running on Windows XP x86
VCDS Version: 19.6.1.0
Data version: 20190529 DS308.0
www.Ross-Tech.com

Workshop Code: 000 11618 000000




--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Gateway Installation List:  3Q0 907 530 L

01-Engine -- Status: Malfunction 0010
02-Auto Trans -- Status: Malfunction 0010
03-ABS Brakes -- Status: Malfunction 0010
05-Acc/Start Auth. -- Status: Malfunction 0010
08-Auto HVAC -- Status: Malfunction 0010
09-Cent. Elect. -- Status: Malfunction 0010
13-Auto Dist. Reg -- Status: Malfunction 0010
15-Airbags -- Status: Malfunction 0010
16-Steering wheel -- Status: Malfunction 0010
17-Instruments -- Status: Malfunction 0010
19-CAN Gateway -- Status: Malfunction 0010
2B-Steer. Col. Lock -- Status: Malfunction 0010
3C-Lane Change -- Status: Cannot be reached 0100
42-Door Elect, Driver -- Status: Malfunction 0010
44-Steering Assist -- Status: Malfunction 0010
4B-Multifunc. Module -- Status: INTERFACE NOT COMPATIBLE 
52-Door Elect, Pass. -- Status: Malfunction 0010
5F-Information Electr. -- Status: Malfunction 0010
6C-Back-up Cam. -- Status: OK 0000
75-Telematics -- Status: Malfunction 0010
CA-Sunroof -- Status: INTERFACE NOT COMPATIBLE 
D8-LED HeadL. Pwr Left -- Status: INTERFACE NOT COMPATIBLE 
D9-LED HeadL. Pwr Right -- Status: INTERFACE NOT COMPATIBLE

Does it mean my interface is too obsolete?
 
   #44  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,740
Reaction score
33,541
Location
USA
VCDS Serial number
HC100001
Does it mean my interface is too obsolete?
There are at least four control modules in that car that your "legacy" interface can't communicate with. So yes, an interface upgrade would be recommended.

-Uwe-
 
   #45  

graaja

Verified VCDS User
Verified
Joined
Apr 4, 2017
Messages
2
Reaction score
3
Location
India
VCDS Serial number
C?ID=298731
Hi,

Recently, I had upgraded to a new laptop that runs Windows 10 64 bit version. I installed VCDS version 19.6.1. When I launch VCDS from desktop shortcut, the program does not launch. Following are the checks I have performed.

1. When I check the task manager, the program is not listed in the processes.
2. Tried running the program in Administrator mode.
3. Tried troubleshooting compatibility issues and ran in Win8 and Win7 compatibility modes.
4. Checked that firewall has been configured to allow VCDS.
5. Added VCDS.exe as an exception in the antivirus software.

None of these work. Any pointers to what could be the problem?

Thanks in advance.

Edit: I have the Hex-V2 interface with a 3-VIN license.
 
   #46  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,740
Reaction score
33,541
Location
USA
VCDS Serial number
HC100001
Recently, I had upgraded to a new laptop that runs Windows 10 64 bit version. I installed VCDS version 19.6.1. When I launch VCDS from desktop shortcut, the program does not launch.
At this point, I think there are more people running Windows 10 and the x64 version of VCDS than any other combination, so there has to be something peculiar about your computer.

Try the "Install 32-bit EXE on 64-bit System" option in the installer to see if that helps.

If that still doesn't work, I would suggest uninstalling and and all bloatware and nannyware that came pre-installed on this computer.

-Uwe-
 
   #48  

daniser

Verified VCDS User
Verified
Joined
Aug 22, 2019
Messages
3
Reaction score
0
Location
Russia
VCDS Serial number
C?ID=197049
Possible bug?

Hello!
I have a problem with latest version of VCDS (19.6.1). When I try to access some of control modules of my car (for example, ABS and steering angle sensor), the error balloon above "Advanced ID" button is shown: "Vehicle is unsupported". Every other button stays disabled.
I know about legacy interfaces and 2019+ cars... BUT! My car is 2013 Polo sedan (russian market model), my interface is HEX-USB+CAN, OS is Windows 10 x64. When I've reinstalled previous version (19.6.0 - thank God I kept distro) - all work fine again.
Here is the log from the "Advanced ID" window (sorry don't know how exactly it's called):
Code:
Wednesday,21,August,2019,20:57:06:05202
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 19.6.1.0 (x64)
Data version: 20190529 DS308.0
www.Ross-Tech.com





--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


                Address 03: ABS Brakes
Control Module Part Number: 6R0 907 379 AQ
  Component and/or Version: ABS9.0 front  H01 0003
           Software Coding: 50DD2F64212504C10A18F472845720000000
            Work Shop Code: WSC 01530
                      VCID: 0D115EF2DC450C27E2-8058

Advanced Identification/FAZIT
     Serial number: --------------
     Identification: BPA-085
     Date: 08.08.13
     Manufacturer number: 0040
     Test stand number: 2660
Flash Status
     Programming Attempts(application): 1/0
     Flash Date: 00.01.01
Misc.
     Hardware number: 6R0 907 379 AQ
     Workshop System Name: J104
     ASAM Dataset: EV_Brake1ABS90BOSCH
     ASAM Dataset Revision: 003017
VCDS Info:
       VCID: 0D115EF2DC450C27E2-8058
       Labels: Redir Fail!
       ROD: ERROR - EV_Brake1ABS90BOSCH 003017 (VN75)
Of course, I will post full scan if needed.
 
   #49  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,740
Reaction score
33,541
Location
USA
VCDS Serial number
HC100001
Yes, please do post a full scan, including the VIN as reported by VCDS.

-Uwe-
 
   #50  

daniser

Verified VCDS User
Verified
Joined
Aug 22, 2019
Messages
3
Reaction score
0
Location
Russia
VCDS Serial number
C?ID=197049
Yes, please do post a full scan, including the VIN as reported by VCDS.

-Uwe-

Ok, nevermind, here's a bunch of errors mainly in BCM and Discover Media :) Need to find a time to kill most of them ("echoes" of retrofitting ;)...

Code:
Wednesday,21,August,2019,20:40:26:05202
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 19.6.1.0 (x64)
Data version: 20190529 DS308.0
www.Ross-Tech.com


VIN: XW8ZZZ61ZEG021496   License Plate: 


Chassis Type: 61-VW25 (7E0)
Scan: 01 03 04 09 15 17 19 25 37 44 56 5F 77

VIN: XW8ZZZ61ZEG021496   Mileage: 69210km-43005miles

01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
09-Cent. Elect. -- Status: Malfunction 0010
15-Airbags -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
37-Navigation -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
56-Radio -- Status: OK 0000
5F-Information Electr. -- Status: Malfunction 0010
77-Telephone -- Status: OK 0000
 
-------------------------------------------------------------------------------
Address 01: Engine
Cannot be reached

-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104)       Labels: Redir Fail!
   Part No SW: 6R0 907 379 AQ    HW: 6R0 907 379 AQ
   Component: ABS9.0 front  H01 0003  
   Serial number: --------------
   Coding: 50DD2F64212504C10A18F472845720000000
   Shop #: WSC 01530 935 00200
   ASAM Dataset: EV_Brake1ABS90BOSCH 003017
   ROD: EV_Brake1ABS90BOSCH_VW25.rod
   VCID: 0D115EF2DC450C27E2-8058

No fault code found.

-------------------------------------------------------------------------------
Address 04: Steering Angle (G085)       Labels:* 6R0-959-654.clb
   Part No SW: 6R0 959 654     HW: 6R0 959 654 
   Component: LENKW.SENSOR  H07 0070  
   Serial number: 20111813470008
   Coding: 01
   Shop #: WSC 00000 000 00000
   ASAM Dataset: EV_LWSKLOVW25X 005001
   ROD: EV_LWSKLOVW25X.rod
   VCID: 7EF3093EE1E327BFEB-802A

1 Fault Found:
1140738 - Steering angle sensor 
          B1168 54 [009] - Missing Calibration / Basic Setting
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 29
                    Mileage: 69219 km
                    Date: 2019.08.21
                    Time: 18:54:01

                    Voltage terminal 15: 11.20 V
                    Voltage terminal 30: 11.40 V
                    Terminal 15 status: On


-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519)       Labels:. 7E0-937-BCM-V1.clb
   Part No SW: 7E0 937 090     HW: 7E0 937 090 
   Component: BCM PQ25 Max4 H80 0736  
   Revision: B9080001    Serial number: 0771 029160357
   Coding: 62904ABF08A10840000800002C0B049000C0414F60040000200000000000
   Shop #: WSC 01530 935 00200
   VCID: 68DF4F669B67890F31-803C

   Subsystem 1 - Part No SW: 5G0 959 442 L    HW: 5G0 959 442 L
   Component: E221__MFL-DC1  H11 0103 
   Serial number: 29170001546230087311
   Coding: A5FFFF

5 Faults Found:
03303 - Response Closing Status of Rear Left Door 
            008 - Implausible Signal
             Freeze Frame:
                    Fault Status: 01101000
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 29
                    Mileage: 69219 km
                    Time Indication: 0
                    Date: 2019.08.21
                    Time: 20:14:00

01516 - Terminal 30; Left 
            011 - Open Circuit
             Freeze Frame:
                    Fault Status: 01101011
                    Fault Priority: 3
                    Fault Frequency: 5
                    Reset counter: 29
                    Mileage: 69219 km
                    Time Indication: 0
                    Date: 2019.08.21
                    Time: 18:54:02

00927 - Terminal 30 (Right) 
            011 - Open Circuit
             Freeze Frame:
                    Fault Status: 01101011
                    Fault Priority: 3
                    Fault Frequency: 5
                    Reset counter: 29
                    Mileage: 69219 km
                    Time Indication: 0
                    Date: 2019.08.21
                    Time: 18:54:02

01748 - Switch for Tiptronic in Steering Wheel (E438); Up 
            014 - Defective
             Freeze Frame:
                    Fault Status: 01101110
                    Fault Priority: 2
                    Fault Frequency: 2
                    Reset counter: 29
                    Mileage: 69219 km
                    Time Indication: 0
                    Date: 2019.08.21
                    Time: 18:54:02

01749 - Switch for Tiptronic in Steering Wheel (E439); Down 
            014 - Defective
             Freeze Frame:
                    Fault Status: 01101110
                    Fault Priority: 2
                    Fault Frequency: 2
                    Reset counter: 29
                    Mileage: 69219 km
                    Time Indication: 0
                    Date: 2019.08.21
                    Time: 18:54:02


-------------------------------------------------------------------------------
Address 15: Airbags (J234)       Labels:| 5K0-959-655.clb
   Part No SW: 6R0 959 655 J    HW: 6R0 959 655 J
   Component: VW10AirbagU05 H10 0020  
   Revision: --------    Serial number: 003GW00LMTVP
   Coding: 003035
   Shop #: WSC 01530 935 00200
   ASAM Dataset: EV_AirbaVW10BPAVW250 A01001
   ROD: EV_AirbaVW10BPAVW250.rod
   VCID: 4999AAE2E8AD50070E-801C

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments (J285)       Labels:| 5K0-920-xxx-17.clb-SRI1
   Part No SW: 6R0 920 870 FX    HW: 6R0 920 870 FX
   Component: KOMBI         H04 0709  
   Serial number: 00000000000000
   Coding: 140E00
   Shop #: WSC 00180 935 00000
   ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04723
   ROD: EV_Kombi_UDS_VDD_RM09_004_VW23.rod
   VCID: 102F4786CB7721CF09-8044

No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533)       Labels:. 7E0-909-901.clb
   Part No SW: 7E0 909 901     HW: 7E0 937 090 
   Component: GW-K-CAN TP20 H80 0736  
   Revision: B9080001    
   Coding: 002200
   Shop #: WSC 01530 935 00200
   VCID: 68DF4F669B67890F31-803C

No fault code found.

-------------------------------------------------------------------------------
Address 25: Immobilizer (J334)       Labels:| 5K0-920-xxx-25.clb
   Part No SW: 5K0 953 234     HW: 5K0 953 234 
   Component: IMMO          H04 0709  
   Serial number: 00000000000000
   Coding: 000000
   Shop #: WSC 00000 000 00000
   ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03710
   ROD: EV_Immo_UDS_VDD_RM09.rod
   VCID: 6ADB356E8D6BBB1F27-803E

No fault code found.

-------------------------------------------------------------------------------
Address 37: Navigation
Cannot be reached

-------------------------------------------------------------------------------
Address 44: Steering Assist (J792)       Labels:* 6Rx-909-144-V1.clb
   Part No SW: 6RU 909 144 J    HW: 6RU 909 144 J
   Component: EPS_ECU       H18 0401  
   Coding: 0000
   Shop #: WSC 00000 000 00000
   ASAM Dataset: EV_SteerAssisUDSNSK 005005
   ROD: EV_SteerAssisUDSNSK.rod
   VCID: 62CB5D4E755BE35FEF-8036

No fault code found.

-------------------------------------------------------------------------------
Address 56: Radio
Cannot be reached

-------------------------------------------------------------------------------
Address 5F: Information Electr. (J794)       Labels:| 5G0-035-MIB-STD2.clb
   Part No SW: 5C0 035 684 D    HW: 5C0 035 684 
   Component: MU-S-NS-US    H22 0468  
   Serial number: VWZAZ2S0252925
   Coding: 02570001FF00000011110004000908001F0100C4002001004E
   Shop #: WSC 00046 123 12345
   ASAM Dataset: EV_MUStd4CTSAT 001022
   ROD: EV_MUStd4CTSAT_VW37.rod
   VCID: 2643015E59F35F7FC3-8072

   Data medium: 
   Subsystem 1 - Part No SW: 5NA 919 866 J    HW: -----------
   Component: ECE2 2019/20  --- 1115 
   Serial number: --------------------

6 Faults Found:
1543 - Control Module Incorrectly Coded 
          U1014 00 [009] - -
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 4
                    Fault Frequency: 1
                    Reset counter: 29
                    Mileage: 69219 km
                    Date: 2019.08.21
                    Time: 18:54:00

                    Voltage terminal 30: 11.3 V
                    Byte_Coding_Condition-byte_0_condition: OK
                    Byte_Coding_Condition-byte_1_condition: OK
                    Byte_Coding_Condition-byte_10_condition: ERROR
                    Byte_Coding_Condition-byte_11_condition: ERROR
                    Byte_Coding_Condition-byte_12_condition: ERROR
                    Byte_Coding_Condition-byte_13_condition: ERROR
                    Byte_Coding_Condition-byte_14_condition: ERROR
                    Byte_Coding_Condition-byte_15_condition: ERROR
                    Byte_Coding_Condition-byte_16_condition: ERROR
                    Byte_Coding_Condition-byte_17_condition: ERROR
                    Byte_Coding_Condition-byte_18_condition: ERROR
                    Byte_Coding_Condition-byte_19_condition: ERROR
                    Byte_Coding_Condition-byte_2_condition: OK
                    Byte_Coding_Condition-byte_20_condition: ERROR
                    Byte_Coding_Condition-byte_21_condition: ERROR
                    Byte_Coding_Condition-byte_22_condition: ERROR
                    Byte_Coding_Condition-byte_23_condition: ERROR
                    Byte_Coding_Condition-byte_24_condition: ERROR
                    Byte_Coding_Condition-byte_25_condition: ERROR
                    Byte_Coding_Condition-byte_26_condition: ERROR
                    Byte_Coding_Condition-byte_27_condition: ERROR
                    Byte_Coding_Condition-byte_3_condition: OK
                    Byte_Coding_Condition-byte_4_condition: OK
                    Byte_Coding_Condition-byte_5_condition: OK
                    Byte_Coding_Condition-byte_6_condition: OK
                    Byte_Coding_Condition-byte_7_condition: OK
                    Byte_Coding_Condition-byte_8_condition: OK
                    Byte_Coding_Condition-byte_9_condition: OK

13697024 - Component Protection 
          U1100 00 [009] - No Basic Setting
          [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 4
                    Fault Frequency: 1
                    Reset counter: 29
                    Mileage: 69219 km
                    Date: 2019.08.21
                    Time: 18:54:00

                    Voltage terminal 30: 11.3 V

15361024 - Component Protection 
          U1101 00 [009] - Active
          [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 4
                    Fault Frequency: 1
                    Reset counter: 29
                    Mileage: 69219 km
                    Date: 2019.08.21
                    Time: 18:54:00

                    Voltage terminal 30: 11.3 V

0009 - Antenna for Satellite Radio 
          B10F4 13 [009] - Open Circuit
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 1
                    Reset counter: 29
                    Mileage: 69219 km
                    Date: 2019.08.21
                    Time: 20:15:43

                    Voltage terminal 30: 11.4 V
                    SDARS_tuner_status_2-Satellite radio antenna status: Electrical OK
                    SDARS_tuner_status_2-Channel selection for satellite radio: 0
                    SDARS_tuner_status_2-Audio Signal: Not available
                    SDARS_tuner_status_2-Antenna current: 1 mA
                    SDARS_tuner_status_2-Reception quality: No_signal
                    SDARS_tuner_status_2-Satellite radio tuner: pre-activation status: 00
                    SDARS_tuner_status_2-Satellite radio tuner: pre-activation value: 00

7178 - Function Restricted due to Missing Message(s) 
          U1111 00 [009] - -
          [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 1
                    Reset counter: 29
                    Mileage: 69219 km
                    Date: 2019.08.21
                    Time: 18:54:03

                    Voltage terminal 30: 11.3 V
                    BAP-BAP_Function_ID: 02

0003 - Antenna 2 for radio 
          B111A 13 [009] - Open Circuit
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 1
                    Reset counter: 29
                    Mileage: 69219 km
                    Date: 2019.08.21
                    Time: 18:54:00

                    Voltage terminal 30: 11.3 V
                    Status of antenna 2 for radio-Antenna current: 0 mA
                    Status of antenna 2 for radio-Connection between radio and antenna amplifier: Open circuit
                    Status of antenna 2 for radio-Connection between antenna amplifier and antenna: Not available
                    Status of antenna 2 for radio-Reception level antenna 2: 0 dBµV


-------------------------------------------------------------------------------
Address 77: Telephone
Cannot be reached

End-------------------------(Elapsed Time: 02:09)--------------------------
 
   #51  

PetrolDave

Verified VCDS User
Verified
Joined
Dec 16, 2014
Messages
7,849
Reaction score
7,740
Location
Westbury, UK
VCDS Serial number
C?ID=1423
There are several modules with "Status: OK 0000" but then shown as "Cannot be reached" - something isn't right here :confused:
 
   #52  

daniser

Verified VCDS User
Verified
Joined
Aug 22, 2019
Messages
3
Reaction score
0
Location
Russia
VCDS Serial number
C?ID=197049
There are several modules with "Status: OK 0000" but then shown as "Cannot be reached" - something isn't right here :confused:

Modules ## 37, 56 and 77 are not "real", i.e. their functions is handled by 5F - Information Electr. (Discover Media). When I've tried to remove them from gateway's installation list - there was an "module incorrectly coded" error.
But "Cannot be reached" on engine is a different story... I think it may be related to low battery charge... It discharged right after the scan, when I tried to start the vehicle with no success. I've recharged it but I think it's dying and I need to replace it ASAP.

Can it be related to "Unsupported vehicle" error in 19.6.1? But why there's no such error in 19.6.0 and earlier versions? I've tried two versions (19.6.1 and 18.9.0 RUS) one after another, in one shot, with different results. Then, after battery recharging, I've tried 19.6.0, and it worked fine, like 18.9.0 before.
 
   #53  

Spacewalker

Verified VCDS User
Verified
Joined
Jun 10, 2014
Messages
1,247
Reaction score
848
Location
Poland
VCDS Serial number
C?ID=159607
Not sure about that , but can not do any more UDS cluster output test


who can confirm ?
no matter what i select , always rejected
 
   #54  

Jacek

Verified VCDS User
Verified
Joined
Mar 19, 2019
Messages
148
Reaction score
133
Location
Poland
VCDS Serial number
C?ID=360566
Download ver. 20.4.1
 
  • Like
Reactions: Uwe
   #55  

Spacewalker

Verified VCDS User
Verified
Joined
Jun 10, 2014
Messages
1,247
Reaction score
848
Location
Poland
VCDS Serial number
C?ID=159607
Download ver. 20.4.1
yep, fixed,
but why VCDS not detect new update ?
I always select - check Beta version too
and did not even know there is 20.4.1
 
   #56  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,740
Reaction score
33,541
Location
USA
VCDS Serial number
HC100001
Looks like someone forgot to tell the server. :facepalm:

-Uwe-
 
   #57  

hadez16

Verified VCDS User
Verified
Joined
Jun 19, 2017
Messages
824
Reaction score
702
Location
Germany
VCDS Serial number
C?ID=289891
I get a strange message since 20.4.2 in the german VCDS version (english not tested)

When I click OK, everything goes on fine...

photo_2020-09-18_18-4nwjrb.jpg
 
   #58  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,740
Reaction score
33,541
Location
USA
VCDS Serial number
HC100001
I get a strange message since 20.4.2 in the german VCDS version (english not tested)
When I click OK, everything goes on fine...
Hmm... Which German version are you using, exactly?

-Uwe-
 
   #60  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,740
Reaction score
33,541
Location
USA
VCDS Serial number
HC100001
Do me a favor and bump this thread tomorrow. I have 600 miles to drive today....

-Uwe-
 
Back
Top