Page 5 of 6 FirstFirst ... 3456 LastLast
Results 41 to 50 of 51

Thread: Updated to Release 19.6 and Having Trouble? Read This Thread

  1. #41
    VCDS Distributor Mike@Gendan's Avatar
    Join Date
    Jun 2014
    Location
    Swansea, UK
    Posts
    410
    Post Thanks / Like
    Quote Originally Posted by Andy View Post
    ....
    4) Start up VCDS (it may have already started at the end of the installation, which is fine). If VCDS won't start up at all after updating, make sure that Zone Alarm or your virus scanner are not blocking/quarantining the file. Make sure it says Release 18.9 at the top of the screen. If says an older version then something didn't go right. Check the shortcut on your desktop to make sure it's for Release 19.6. If needed, exit out of VCDS then repeat steps 1-3.
    ...
    I'm guessing that should be 19.6 now?
    Apparently I should put something witty or profound in here...

  2. Likes Uwe liked this post
  3. #42
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    23,876
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by Mike@Gendan View Post
    I'm guessing that should be 19.6 now?
    Fixed it for him.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  4. Likes Mike@Gendan, Andy liked this post
  5. #43
    Verified VCDS User bobbik's Avatar
    Join Date
    Oct 2015
    Location
    Poland
    Posts
    19
    Post Thanks / Like
    Code:
    Thursday,18,July,2019,11:33:50:22340
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows XP x86
    VCDS Version: 19.6.1.0
    Data version: 20190529 DS308.0
    www.Ross-Tech.com
    
    Workshop Code: 000 11618 000000
    
    
    
    
    --------------------------------------------------------------------------------
    --------------------------------------------------------------------------------
    
    
    Gateway Installation List:  3Q0 907 530 L
    
    01-Engine -- Status: Malfunction 0010
    02-Auto Trans -- Status: Malfunction 0010
    03-ABS Brakes -- Status: Malfunction 0010
    05-Acc/Start Auth. -- Status: Malfunction 0010
    08-Auto HVAC -- Status: Malfunction 0010
    09-Cent. Elect. -- Status: Malfunction 0010
    13-Auto Dist. Reg -- Status: Malfunction 0010
    15-Airbags -- Status: Malfunction 0010
    16-Steering wheel -- Status: Malfunction 0010
    17-Instruments -- Status: Malfunction 0010
    19-CAN Gateway -- Status: Malfunction 0010
    2B-Steer. Col. Lock -- Status: Malfunction 0010
    3C-Lane Change -- Status: Cannot be reached 0100
    42-Door Elect, Driver -- Status: Malfunction 0010
    44-Steering Assist -- Status: Malfunction 0010
    4B-Multifunc. Module -- Status: INTERFACE NOT COMPATIBLE 
    52-Door Elect, Pass. -- Status: Malfunction 0010
    5F-Information Electr. -- Status: Malfunction 0010
    6C-Back-up Cam. -- Status: OK 0000
    75-Telematics -- Status: Malfunction 0010
    CA-Sunroof -- Status: INTERFACE NOT COMPATIBLE 
    D8-LED HeadL. Pwr Left -- Status: INTERFACE NOT COMPATIBLE 
    D9-LED HeadL. Pwr Right -- Status: INTERFACE NOT COMPATIBLE
    Does it mean my interface is too obsolete?

  6. #44
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    23,876
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by bobbik View Post
    Does it mean my interface is too obsolete?
    There are at least four control modules in that car that your "legacy" interface can't communicate with. So yes, an interface upgrade would be recommended.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  7. Likes Eric liked this post
  8. #45
    Verified VCDS User
    Join Date
    Apr 2017
    Location
    India
    Posts
    2
    Post Thanks / Like
    Hi,

    Recently, I had upgraded to a new laptop that runs Windows 10 64 bit version. I installed VCDS version 19.6.1. When I launch VCDS from desktop shortcut, the program does not launch. Following are the checks I have performed.

    1. When I check the task manager, the program is not listed in the processes.
    2. Tried running the program in Administrator mode.
    3. Tried troubleshooting compatibility issues and ran in Win8 and Win7 compatibility modes.
    4. Checked that firewall has been configured to allow VCDS.
    5. Added VCDS.exe as an exception in the antivirus software.

    None of these work. Any pointers to what could be the problem?

    Thanks in advance.

    Edit: I have the Hex-V2 interface with a 3-VIN license.

  9. #46
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    23,876
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by graaja View Post
    Recently, I had upgraded to a new laptop that runs Windows 10 64 bit version. I installed VCDS version 19.6.1. When I launch VCDS from desktop shortcut, the program does not launch.
    At this point, I think there are more people running Windows 10 and the x64 version of VCDS than any other combination, so there has to be something peculiar about your computer.

    Try the "Install 32-bit EXE on 64-bit System" option in the installer to see if that helps.

    If that still doesn't work, I would suggest uninstalling and and all bloatware and nannyware that came pre-installed on this computer.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  10. #47
    Verified VCDS User
    Join Date
    Apr 2017
    Location
    India
    Posts
    2
    Post Thanks / Like
    Quote Originally Posted by Uwe View Post
    Try the "Install 32-bit EXE on 64-bit System" option in the installer to see if that helps.
    That solved the problem. VCDS now works.

    Thanks a lot for the solution.

  11. Likes Uwe, Andy, PetrolDave liked this post
  12. #48
    Verified VCDS User
    Join Date
    Aug 2019
    Location
    Russia
    Posts
    2
    Post Thanks / Like

    Possible bug?

    Hello!
    I have a problem with latest version of VCDS (19.6.1). When I try to access some of control modules of my car (for example, ABS and steering angle sensor), the error balloon above "Advanced ID" button is shown: "Vehicle is unsupported". Every other button stays disabled.
    I know about legacy interfaces and 2019+ cars... BUT! My car is 2013 Polo sedan (russian market model), my interface is HEX-USB+CAN, OS is Windows 10 x64. When I've reinstalled previous version (19.6.0 - thank God I kept distro) - all work fine again.
    Here is the log from the "Advanced ID" window (sorry don't know how exactly it's called):
    Code:
    Wednesday,21,August,2019,20:57:06:05202
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
    VCDS Version: 19.6.1.0 (x64)
    Data version: 20190529 DS308.0
    www.Ross-Tech.com
    
    
    
    
    
    --------------------------------------------------------------------------------
    --------------------------------------------------------------------------------
    
    
                    Address 03: ABS Brakes
    Control Module Part Number: 6R0 907 379 AQ
      Component and/or Version: ABS9.0 front  H01 0003
               Software Coding: 50DD2F64212504C10A18F472845720000000
                Work Shop Code: WSC 01530
                          VCID: 0D115EF2DC450C27E2-8058
    
    Advanced Identification/FAZIT
         Serial number: --------------
         Identification: BPA-085
         Date: 08.08.13
         Manufacturer number: 0040
         Test stand number: 2660
    Flash Status
         Programming Attempts(application): 1/0
         Flash Date: 00.01.01
    Misc.
         Hardware number: 6R0 907 379 AQ
         Workshop System Name: J104
         ASAM Dataset: EV_Brake1ABS90BOSCH
         ASAM Dataset Revision: 003017
    VCDS Info:
           VCID: 0D115EF2DC450C27E2-8058
           Labels: Redir Fail!
           ROD: ERROR - EV_Brake1ABS90BOSCH 003017 (VN75)
    Of course, I will post full scan if needed.

  13. #49
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    23,876
    Post Thanks / Like
    Blog Entries
    1
    Yes, please do post a full scan, including the VIN as reported by VCDS.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  14. #50
    Verified VCDS User
    Join Date
    Aug 2019
    Location
    Russia
    Posts
    2
    Post Thanks / Like
    Quote Originally Posted by Uwe View Post
    Yes, please do post a full scan, including the VIN as reported by VCDS.

    -Uwe-
    Ok, nevermind, here's a bunch of errors mainly in BCM and Discover Media Need to find a time to kill most of them ("echoes" of retrofitting ...

    Code:
    Wednesday,21,August,2019,20:40:26:05202
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
    VCDS Version: 19.6.1.0 (x64)
    Data version: 20190529 DS308.0
    www.Ross-Tech.com
    
    
    VIN: XW8ZZZ61ZEG021496   License Plate: 
    
    
    Chassis Type: 61-VW25 (7E0)
    Scan: 01 03 04 09 15 17 19 25 37 44 56 5F 77
    
    VIN: XW8ZZZ61ZEG021496   Mileage: 69210km-43005miles
    
    01-Engine -- Status: OK 0000
    03-ABS Brakes -- Status: OK 0000
    04-Steering Angle -- Status: OK 0000
    09-Cent. Elect. -- Status: Malfunction 0010
    15-Airbags -- Status: OK 0000
    17-Instruments -- Status: OK 0000
    19-CAN Gateway -- Status: OK 0000
    25-Immobilizer -- Status: OK 0000
    37-Navigation -- Status: OK 0000
    44-Steering Assist -- Status: OK 0000
    56-Radio -- Status: OK 0000
    5F-Information Electr. -- Status: Malfunction 0010
    77-Telephone -- Status: OK 0000
     
    -------------------------------------------------------------------------------
    Address 01: Engine
    Cannot be reached
    
    -------------------------------------------------------------------------------
    Address 03: ABS Brakes (J104)       Labels: Redir Fail!
       Part No SW: 6R0 907 379 AQ    HW: 6R0 907 379 AQ
       Component: ABS9.0 front  H01 0003  
       Serial number: --------------
       Coding: 50DD2F64212504C10A18F472845720000000
       Shop #: WSC 01530 935 00200
       ASAM Dataset: EV_Brake1ABS90BOSCH 003017
       ROD: EV_Brake1ABS90BOSCH_VW25.rod
       VCID: 0D115EF2DC450C27E2-8058
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 04: Steering Angle (G085)       Labels:* 6R0-959-654.clb
       Part No SW: 6R0 959 654     HW: 6R0 959 654 
       Component: LENKW.SENSOR  H07 0070  
       Serial number: 20111813470008
       Coding: 01
       Shop #: WSC 00000 000 00000
       ASAM Dataset: EV_LWSKLOVW25X 005001
       ROD: EV_LWSKLOVW25X.rod
       VCID: 7EF3093EE1E327BFEB-802A
    
    1 Fault Found:
    1140738 - Steering angle sensor 
              B1168 54 [009] - Missing Calibration / Basic Setting
              Confirmed - Tested Since Memory Clear
                 Freeze Frame:
                        Fault Status: 00000001
                        Fault Priority: 2
                        Fault Frequency: 1
                        Reset counter: 29
                        Mileage: 69219 km
                        Date: 2019.08.21
                        Time: 18:54:01
    
                        Voltage terminal 15: 11.20 V
                        Voltage terminal 30: 11.40 V
                        Terminal 15 status: On
    
    
    -------------------------------------------------------------------------------
    Address 09: Cent. Elect. (J519)       Labels:. 7E0-937-BCM-V1.clb
       Part No SW: 7E0 937 090     HW: 7E0 937 090 
       Component: BCM PQ25 Max4 H80 0736  
       Revision: B9080001    Serial number: 0771 029160357
       Coding: 62904ABF08A10840000800002C0B049000C0414F60040000200000000000
       Shop #: WSC 01530 935 00200
       VCID: 68DF4F669B67890F31-803C
    
       Subsystem 1 - Part No SW: 5G0 959 442 L    HW: 5G0 959 442 L
       Component: E221__MFL-DC1  H11 0103 
       Serial number: 29170001546230087311
       Coding: A5FFFF
    
    5 Faults Found:
    03303 - Response Closing Status of Rear Left Door 
                008 - Implausible Signal
                 Freeze Frame:
                        Fault Status: 01101000
                        Fault Priority: 2
                        Fault Frequency: 1
                        Reset counter: 29
                        Mileage: 69219 km
                        Time Indication: 0
                        Date: 2019.08.21
                        Time: 20:14:00
    
    01516 - Terminal 30; Left 
                011 - Open Circuit
                 Freeze Frame:
                        Fault Status: 01101011
                        Fault Priority: 3
                        Fault Frequency: 5
                        Reset counter: 29
                        Mileage: 69219 km
                        Time Indication: 0
                        Date: 2019.08.21
                        Time: 18:54:02
    
    00927 - Terminal 30 (Right) 
                011 - Open Circuit
                 Freeze Frame:
                        Fault Status: 01101011
                        Fault Priority: 3
                        Fault Frequency: 5
                        Reset counter: 29
                        Mileage: 69219 km
                        Time Indication: 0
                        Date: 2019.08.21
                        Time: 18:54:02
    
    01748 - Switch for Tiptronic in Steering Wheel (E438); Up 
                014 - Defective
                 Freeze Frame:
                        Fault Status: 01101110
                        Fault Priority: 2
                        Fault Frequency: 2
                        Reset counter: 29
                        Mileage: 69219 km
                        Time Indication: 0
                        Date: 2019.08.21
                        Time: 18:54:02
    
    01749 - Switch for Tiptronic in Steering Wheel (E439); Down 
                014 - Defective
                 Freeze Frame:
                        Fault Status: 01101110
                        Fault Priority: 2
                        Fault Frequency: 2
                        Reset counter: 29
                        Mileage: 69219 km
                        Time Indication: 0
                        Date: 2019.08.21
                        Time: 18:54:02
    
    
    -------------------------------------------------------------------------------
    Address 15: Airbags (J234)       Labels:| 5K0-959-655.clb
       Part No SW: 6R0 959 655 J    HW: 6R0 959 655 J
       Component: VW10AirbagU05 H10 0020  
       Revision: --------    Serial number: 003GW00LMTVP
       Coding: 003035
       Shop #: WSC 01530 935 00200
       ASAM Dataset: EV_AirbaVW10BPAVW250 A01001
       ROD: EV_AirbaVW10BPAVW250.rod
       VCID: 4999AAE2E8AD50070E-801C
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 17: Instruments (J285)       Labels:| 5K0-920-xxx-17.clb-SRI1
       Part No SW: 6R0 920 870 FX    HW: 6R0 920 870 FX
       Component: KOMBI         H04 0709  
       Serial number: 00000000000000
       Coding: 140E00
       Shop #: WSC 00180 935 00000
       ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04723
       ROD: EV_Kombi_UDS_VDD_RM09_004_VW23.rod
       VCID: 102F4786CB7721CF09-8044
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 19: CAN Gateway (J533)       Labels:. 7E0-909-901.clb
       Part No SW: 7E0 909 901     HW: 7E0 937 090 
       Component: GW-K-CAN TP20 H80 0736  
       Revision: B9080001    
       Coding: 002200
       Shop #: WSC 01530 935 00200
       VCID: 68DF4F669B67890F31-803C
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 25: Immobilizer (J334)       Labels:| 5K0-920-xxx-25.clb
       Part No SW: 5K0 953 234     HW: 5K0 953 234 
       Component: IMMO          H04 0709  
       Serial number: 00000000000000
       Coding: 000000
       Shop #: WSC 00000 000 00000
       ASAM Dataset: EV_Immo_UDS_VDD_RM09 A03710
       ROD: EV_Immo_UDS_VDD_RM09.rod
       VCID: 6ADB356E8D6BBB1F27-803E
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 37: Navigation
    Cannot be reached
    
    -------------------------------------------------------------------------------
    Address 44: Steering Assist (J792)       Labels:* 6Rx-909-144-V1.clb
       Part No SW: 6RU 909 144 J    HW: 6RU 909 144 J
       Component: EPS_ECU       H18 0401  
       Coding: 0000
       Shop #: WSC 00000 000 00000
       ASAM Dataset: EV_SteerAssisUDSNSK 005005
       ROD: EV_SteerAssisUDSNSK.rod
       VCID: 62CB5D4E755BE35FEF-8036
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 56: Radio
    Cannot be reached
    
    -------------------------------------------------------------------------------
    Address 5F: Information Electr. (J794)       Labels:| 5G0-035-MIB-STD2.clb
       Part No SW: 5C0 035 684 D    HW: 5C0 035 684 
       Component: MU-S-NS-US    H22 0468  
       Serial number: VWZAZ2S0252925
       Coding: 02570001FF00000011110004000908001F0100C4002001004E
       Shop #: WSC 00046 123 12345
       ASAM Dataset: EV_MUStd4CTSAT 001022
       ROD: EV_MUStd4CTSAT_VW37.rod
       VCID: 2643015E59F35F7FC3-8072
    
       Data medium: 
       Subsystem 1 - Part No SW: 5NA 919 866 J    HW: -----------
       Component: ECE2 2019/20  --- 1115 
       Serial number: --------------------
    
    6 Faults Found:
    1543 - Control Module Incorrectly Coded 
              U1014 00 [009] - -
              Confirmed - Tested Since Memory Clear
                 Freeze Frame:
                        Fault Status: 00000001
                        Fault Priority: 4
                        Fault Frequency: 1
                        Reset counter: 29
                        Mileage: 69219 km
                        Date: 2019.08.21
                        Time: 18:54:00
    
                        Voltage terminal 30: 11.3 V
                        Byte_Coding_Condition-byte_0_condition: OK
                        Byte_Coding_Condition-byte_1_condition: OK
                        Byte_Coding_Condition-byte_10_condition: ERROR
                        Byte_Coding_Condition-byte_11_condition: ERROR
                        Byte_Coding_Condition-byte_12_condition: ERROR
                        Byte_Coding_Condition-byte_13_condition: ERROR
                        Byte_Coding_Condition-byte_14_condition: ERROR
                        Byte_Coding_Condition-byte_15_condition: ERROR
                        Byte_Coding_Condition-byte_16_condition: ERROR
                        Byte_Coding_Condition-byte_17_condition: ERROR
                        Byte_Coding_Condition-byte_18_condition: ERROR
                        Byte_Coding_Condition-byte_19_condition: ERROR
                        Byte_Coding_Condition-byte_2_condition: OK
                        Byte_Coding_Condition-byte_20_condition: ERROR
                        Byte_Coding_Condition-byte_21_condition: ERROR
                        Byte_Coding_Condition-byte_22_condition: ERROR
                        Byte_Coding_Condition-byte_23_condition: ERROR
                        Byte_Coding_Condition-byte_24_condition: ERROR
                        Byte_Coding_Condition-byte_25_condition: ERROR
                        Byte_Coding_Condition-byte_26_condition: ERROR
                        Byte_Coding_Condition-byte_27_condition: ERROR
                        Byte_Coding_Condition-byte_3_condition: OK
                        Byte_Coding_Condition-byte_4_condition: OK
                        Byte_Coding_Condition-byte_5_condition: OK
                        Byte_Coding_Condition-byte_6_condition: OK
                        Byte_Coding_Condition-byte_7_condition: OK
                        Byte_Coding_Condition-byte_8_condition: OK
                        Byte_Coding_Condition-byte_9_condition: OK
    
    13697024 - Component Protection 
              U1100 00 [009] - No Basic Setting
              [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
              Confirmed - Tested Since Memory Clear
                 Freeze Frame:
                        Fault Status: 00000001
                        Fault Priority: 4
                        Fault Frequency: 1
                        Reset counter: 29
                        Mileage: 69219 km
                        Date: 2019.08.21
                        Time: 18:54:00
    
                        Voltage terminal 30: 11.3 V
    
    15361024 - Component Protection 
              U1101 00 [009] - Active
              [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
              Confirmed - Tested Since Memory Clear
                 Freeze Frame:
                        Fault Status: 00000001
                        Fault Priority: 4
                        Fault Frequency: 1
                        Reset counter: 29
                        Mileage: 69219 km
                        Date: 2019.08.21
                        Time: 18:54:00
    
                        Voltage terminal 30: 11.3 V
    
    0009 - Antenna for Satellite Radio 
              B10F4 13 [009] - Open Circuit
              Confirmed - Tested Since Memory Clear
                 Freeze Frame:
                        Fault Status: 00000001
                        Fault Priority: 6
                        Fault Frequency: 1
                        Reset counter: 29
                        Mileage: 69219 km
                        Date: 2019.08.21
                        Time: 20:15:43
    
                        Voltage terminal 30: 11.4 V
                        SDARS_tuner_status_2-Satellite radio antenna status: Electrical OK
                        SDARS_tuner_status_2-Channel selection for satellite radio: 0
                        SDARS_tuner_status_2-Audio Signal: Not available
                        SDARS_tuner_status_2-Antenna current: 1 mA
                        SDARS_tuner_status_2-Reception quality: No_signal
                        SDARS_tuner_status_2-Satellite radio tuner: pre-activation status: 00
                        SDARS_tuner_status_2-Satellite radio tuner: pre-activation value: 00
    
    7178 - Function Restricted due to Missing Message(s) 
              U1111 00 [009] - -
              [New feature! Extended UDS fault detail is only supported by current gen. interfaces]
              Confirmed - Tested Since Memory Clear
                 Freeze Frame:
                        Fault Status: 00000001
                        Fault Priority: 6
                        Fault Frequency: 1
                        Reset counter: 29
                        Mileage: 69219 km
                        Date: 2019.08.21
                        Time: 18:54:03
    
                        Voltage terminal 30: 11.3 V
                        BAP-BAP_Function_ID: 02
    
    0003 - Antenna 2 for radio 
              B111A 13 [009] - Open Circuit
              Confirmed - Tested Since Memory Clear
                 Freeze Frame:
                        Fault Status: 00000001
                        Fault Priority: 6
                        Fault Frequency: 1
                        Reset counter: 29
                        Mileage: 69219 km
                        Date: 2019.08.21
                        Time: 18:54:00
    
                        Voltage terminal 30: 11.3 V
                        Status of antenna 2 for radio-Antenna current: 0 mA
                        Status of antenna 2 for radio-Connection between radio and antenna amplifier: Open circuit
                        Status of antenna 2 for radio-Connection between antenna amplifier and antenna: Not available
                        Status of antenna 2 for radio-Reception level antenna 2: 0 dBV
    
    
    -------------------------------------------------------------------------------
    Address 77: Telephone
    Cannot be reached
    
    End-------------------------(Elapsed Time: 02:09)--------------------------

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •