Results 1 to 7 of 7

Thread: VW Touareg 2012 - Disabling front fog light as cornering

  1. #1
    Verified VCDS User
    Join Date
    Jun 2014
    Posts
    1
    Post Thanks / Like

    VW Touareg 2012 - Disabling front fog light as cornering

    Hi Guys

    In my VW Touareg 2012, the front fog lights turn on when the side markers and the light are on.

    According with the VAGCOM long code helping, to disable it the bit of bite 4 of module 9 (J519) has to be zero.

    I tried but does not works. It is appears this code it is not good for this module as the VAGCOM helper says.

    Anyone has try this tweak in a Touareg or an Audi with the same module ?


    This is the code of this module:


    -------------------------------------------------------------------------------
    Address 09: Cent. Elect. (J519) Labels: 4H0-907-063.clb
    Part No SW: 4H0 907 063 BD HW: 4H0 907 063 D
    Component: BCM1 2.0 H12 0100
    Revision: 15012002 Serial number: 00000001066769
    Coding: 26001012973C5D010020180300005D0C431C46088201026100 0000020000
    Shop #: WSC 31414 790 00001
    VCID: 6BD5206F8A9DD540E59

    Subsystem 1 - Part No SW: 7P0 955 119 HW: 7P0 955 119 Labels: 1KX-955-119.CLB
    Component: WWS 110902 31 0020
    Coding: 004DBD

    Subsystem 2 - Part No SW: 7P0 955 559 D HW: 7P0 955 559 D Labels: 8K0-955-559.CLB
    Component: RLFS H09 0011
    Coding: 025223

    Subsystem 3 - Part No SW: 7P6 941 431 E HW: 7P6 941 431 E
    Component: E1 - LDS H04 0031

    Subsystem 4 - Part No SW: 4H0 907 410 A HW: 4H0 907 410 A
    Component: USHL4.2 H30 0020

    No fault code found.

  2. #2
    Verified VCDS User
    Join Date
    Aug 2018
    Location
    USA
    Posts
    6
    Post Thanks / Like
    I have this same question. It appears no one has the anwser.
    I unchecked the box that says fog lights when cornering yet they still come on.
    Hass Ross Tech been locked out/blocked from making certain changes to some modules?
    IMO a fog light coming on when signaling/turning is useless and does nothing but get people telling you one of your fog lamps is out.

  3. #3
    Verified VCDS User hadez16's Avatar
    Join Date
    Jun 2017
    Location
    Germany
    Posts
    607
    Post Thanks / Like
    Please post current coding of unit 55

  4. #4
    Verified VCDS User
    Join Date
    Aug 2018
    Location
    USA
    Posts
    6
    Post Thanks / Like
    Below is from a scan I did 7/3/19. Not sure what module 55 has to do with it. I thought module 9 had to be coded for this.

    Code:
    -
    Address 55: Headlight Range (J745)       Labels:. 7P6-907-357.clb
       Part No SW: 7P6 907 357     HW: 7L6 907 357 C
       Component: AFS-ECU       H04 0110  
       Revision: --------    Serial number: --------------
       Coding: 010A00010F000400
       Shop #: WSC 31414 790 00001
       ASAM Dataset: EV_HeadlRegulVWAFS 005006
       ROD: EV_HeadlRegulVWAFS_VW52.rod
       VCID: 7CA1F4C39662AFE7961-8028
    
       Left_headlamp_power_output_stage: 
       Subsystem 1 - Part No SW: 4H0 941 329     HW: 4H0 941 329   Labels: 3D0-941-329.CLB
       Component: LeiMo links  H02 0006 
       Coding: 130000
    
       Right_headlamp_power_output_stage: 
       Subsystem 2 - Part No SW: 4H0 941 329     HW: 4H0 941 329   Labels: 3D0-941-329.CLB
       Component: LeiMo rechts  H02 0006 
       Coding: 130000
    
    No fault code found.
    Last edited by New2Tregs; 07-13-2019 at 09:36 PM.

  5. #5
    Verified VCDS User hadez16's Avatar
    Join Date
    Jun 2017
    Location
    Germany
    Posts
    607
    Post Thanks / Like
    In addition to deactivating the bit in Unit 09, set Byte 6 in Unit 55 to Hex 00.
    It might happen that the basic setting gets lost for the head lamps then. Just start the basic setting routine and quit it again using the options in Basic Settings dialog.

  6. Likes Uwe liked this post
  7. #6
    Verified VCDS User
    Join Date
    Aug 2018
    Location
    USA
    Posts
    6
    Post Thanks / Like
    When I get some time I'll look into this.
    As for preforming basic settings I'm guessing the instruction in the link below are what your speaking of?

    http://wiki.ross-tech.com/wiki/index...Xenon_with_AFS)

  8. #7
    Verified VCDS User hadez16's Avatar
    Join Date
    Jun 2017
    Location
    Germany
    Posts
    607
    Post Thanks / Like
    Quote Originally Posted by New2Tregs View Post
    When I get some time I'll look into this.
    As for preforming basic settings I'm guessing the instruction in the link below are what your speaking of?

    http://wiki.ross-tech.com/wiki/index...Xenon_with_AFS)
    Maybe Golf is the wrong comparison but the procedure to confirm a lost basic setting is just to START the basic setting and then to CONFIRM (however it is translated to english) the basic setting. (both in "Basic Setting" dialog of unit 55)
    Last edited by hadez16; 07-15-2019 at 09:08 AM.

  9. Likes Uwe liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •