Results 1 to 4 of 4

Thread: Audi TT - 8N0 - change abs module

  1. #1
    Sketchy
    Join Date
    Mar 2015
    Location
    Poland
    Posts
    44
    Post Thanks / Like

    Audi TT - 8N0 - change abs module

    Hi firends,

    I have little problem, abs module is dead, 8N0309379D, I put used 8N0309379 E (quattro), I can't change coding to FWD, only accept AWD. How change coding ?
    I read on uncle google, that this pump have hard method codign, what is ?

    THX for help

    Code:
    Wednesday,01,June,2016,14:35:33:27911
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x86
    VCDS Version: 15.7.4.1
    Data version: 20160216
    www.Ross-Tech.com
    
    
    VIN:    License Plate: AUDI TT
    Mileage: 226050km-140460mi   Repair Order: 
    
    
    
    --------------------------------------------------------------------------------
    --------------------------------------------------------------------------------
    
    
    Chassis Type: 8N - Audi TT (1999 > 2007)
    Scan: 01 02 03 08 15 17 22 35 37 45 55 56 76 77
     
       Mileage: 226050km-140460miles
    -------------------------------------------------------------------------------
    Address 01: Engine        Labels: 06A-906-032-AJQ.lbl
       Part No: 8N0 906 018 AB
       Component: 1.8L R4/5VT         0002  
       Coding: 05500
       Shop #: WSC 06435  
       VCID: 71E9DD883BC41DB681-515E
    
    No fault code found.
    Readiness: 0000 0000
    
    -------------------------------------------------------------------------------
    Address 03: ABS Brakes        Labels: 8N0-907-379-MK20-E.lbl
       Part No: 8N0 907 379 E
       Component: ESP     20    CAN  V005   
       Coding: 18448
       Shop #: WSC 06435  
       VCID: 3E7336B43A1AB2CE4C-4B00
    
    4 Faults Found:
    01044 - Control Module Incorrectly Coded 
                35-00 -  - 
    01279 - Longitudinal Acceleration Sensor (G251) 
                57-00 - Electric Circuit Failure
    01324 - Control Module for All Wheel Drive (J492) 
                49-00 - No Communications
    00778 - Steering Angle Sensor (G85) 
                62-00 - No or Incorrect Adjustment
    
    -------------------------------------------------------------------------------
    Address 08: Auto HVAC        Labels: 8N0-820-043.lbl
       Part No: 8N0 820 043 
       Component: TT-KLIMAVOLLAUTOMAT D00  
       Coding: 00040
       Shop #: WSC 06435  
       VCID: 67DDB3D00500D306DF-2580
    
    2 Faults Found:
    00603 - Footwell/defroster Flap Positioning Motor (V85) 
                41-10 - Blocked or No Voltage - Intermittent
    01206 - Signal for Duration of Ignition Off Time 
                27-10 - Implausible Signal - Intermittent
    
    -------------------------------------------------------------------------------
    Address 15: Airbags        Labels: 8N8-909-601.lbl
       Part No: 8N8 909 601 
       Component: Airbag Front+Seite 0004  
       Coding: 10102
       Shop #: WSC 06435  
       VCID: 77FDE39055A043864F-5198
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 17: Instruments        Labels: 8Nx-919-xxx-17.lbl
       Part No: 8N1 919 880 E
       Component: KOMBI+WEGFAHRS. M73 D30  
       Coding: 00044
       Shop #: WSC 23060  
       VCID: 3F8D4BB03D10BBC647-4B1A
    
       Subsystem 1 - Part No: Ident
       Component: Nr. Wegfahrs.:AUZ5Z0DD146110  
       Ident.-Nr. Wegfahrs.:AUZ5Z0DD146110
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 35: Centr. Locks        Labels: 8Nx-962-267.lbl
       Part No: 8N8 962 267 
       Component: Zentralverrieg.,DWA D01  
       Coding: 04682
       Shop #: WSC 27022  
       VCID: 7EF3F6B47A9A72CE0C-4F20
    
    6 Faults Found:
    01366 - Opened Due to Crash Signal 
                35-00 -  - 
    01370 - Alarm triggered by Interior Monitoring 
                35-00 -  - 
    01616 - Signal Wire to Interior Monitor 
                36-10 - Open Circuit - Intermittent
    00956 - Key 2 
                09-10 - Adaptation Limit Surpassed - Intermittent
    01560 - Passenger Door 
                60-00 - Won't Safe
    01617 - Please Check DTC Memory of Interior Monitoring 
                35-10 -  -  - Intermittent
    
    -------------------------------------------------------------------------------
    Address 45: Inter. Monitor        Labels: 8E0-951-177.lbl
       Part No: 8N8 951 177 
       Component: Innenraumueberw.    D07  
       Coding: 00001
       Shop #: WSC 00000  
       VCID: 7CF7FCBC6C8660DE22-5198
    
    1 Fault Found:
    01463 - Alarm triggered by Sensor for anti-theft alarm System 
                35-00 -  - 
    
    -------------------------------------------------------------------------------
    Address 56: Radio        Labels: 8D0-035-1xx-56.lbl
       Part No: 4B0 035 186 D
       Component:  Radio             0001  
       Coding: 00517
       Shop #: WSC 06435  
       VCID: 2149EDC8ABA4ED3651-4B1A
    
    2 Faults Found:
    00852 - Loudspeaker(s); Front 
                36-00 - Open Circuit
    00854 - Radio Display Output in dash Panel insert 
                49-10 - No Communications - Intermittent

  2. #2
    Ross-Tech Employee Jef's Avatar
    Join Date
    Jan 2014
    Location
    HQ
    Posts
    2,043
    Post Thanks / Like
    It looks like you can't change it... You've installed an ABS module designed for AWD, that is how it will be.

    http://forums.ross-tech.com/showthre...ed-parts-Maybe
    Jef
    Ross Tech Support Team, Alpha Squad
    Auto-Scan, learn it, love it, live it... then check the fuses.

  3. Likes sazimam liked this post
  4. #3
    Verified VCDS User NZDubNurd's Avatar
    Join Date
    Nov 2014
    Location
    New Zealand
    Posts
    1,031
    Post Thanks / Like
    You just need to install quattro to match, now.

  5. #4
    Verified VCDS User
    Join Date
    Nov 2015
    Location
    Czech Republic
    Posts
    13
    Post Thanks / Like
    CARAT10, have you solved this somehow?
    I am facing exactly the same issue. About to move processors (with its internal Flash memories) from old bad module to the new one because recoding is not possible, unfortunatelly.


    I think you need to code your unit to : 23049, right ?

    Thank you.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •