0-60 Acceleration Measurement in VCDS mobile?

   #1  

palmth

Verified VCDS User
Verified
Joined
Apr 14, 2016
Messages
19
Reaction score
10
Location
USA
VCDS Serial number
C?ID=276028
After my ROD loop issue was resolved by the newest update, I started playing a little with VCDS mobile. The first thing I wanted to do is a 0-60 acceleration test. So I selected 01-Engine > Adv. Measuring Values > Vehicle Speed. Doing this in VCDS brings up an Acceleration button which will open the Acceleration Measurement window. However, in VCDS mobile I could not find the button or the Acceleration Measurement window. Is the feature available in VCDS mobile and if yes, how do I access it?
 
   #2  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,925
Reaction score
33,652
Location
USA
VCDS Serial number
HC100001
I don't think that's been implemented in VCDS-Mobile.

-Uwe-
 
   #3  

palmth

Verified VCDS User
Verified
Joined
Apr 14, 2016
Messages
19
Reaction score
10
Location
USA
VCDS Serial number
C?ID=276028
I don't think that's been implemented in VCDS-Mobile.

-Uwe-

Oh no, you just crushed my hopes. One of the reasons I bought the HEX-NET was that I would't have to haul around my laptop for doing acceleration measurements. Is there a chance that this feature will be implemented in one of the next updates?
 
   #4  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,925
Reaction score
33,652
Location
USA
VCDS Serial number
HC100001
At some point, probably, but right now there are still things we are struggling with that have a much higher priority than that.

-Uwe-
 
Back
Top