Page 1 of 3 123 LastLast
Results 1 to 10 of 26

Thread: How to reset SRI (Service Reminder Indicator) Crafter/LT3

  1. #1
    Verified VCDS User
    Join Date
    May 2014
    Location
    Stockholm Sweden
    Posts
    6
    Post Thanks / Like

    How to reset SRI (Service Reminder Indicator) Crafter/LT3

    Hi

    I Recently bought a VCDS Interface for my Crafter (LT3) 2010. It connects and i can access all modules. Everything seems to work nicely!

    I have now done a service and needs to reset the SRI. I followed the guidline in http://www.ross-tech.com/vcds/tour/LT3.html where the SRI reset procedure for Crafter is described. I just cant finns the Channel "Service intervall extension.." or alike. Seems like my version (12.12.2) doesn´t include the right channel?

    Anyone have any tips on this?

    My autoscan as per below,

    Code:
     VCDS version: AER 12.12.2
    Dataversion: 20140418
    Moonwalk
    Sunday,18,Maj,2014,12:06:53:23306
    Chassityp: 2E (2E - VW Crafter (LT3 / 2006 >))
    Skanna: 01 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9E 9F A0 A1 A2 A3  B0 B1 B2 B3 B4 B5 B6 C1
    VIN: WV1ZZZ2EZA6024726   
    -------------------------------------------------------------------------------
    01: Motor (CEC)       Labels: missing
       Artikelnr SW: 076 906 022 P    HW: 076 906 022 G
       Component: R5 2,5L EDC A020SG  7730  
       Revision: 24H33---    Serienummer: VWXDZ0J1007072
       Kodning: 0003072
       Verkstad #: WSC 40206 222 99507
       VCID: 2077DCBBF098E91EBB7-FFFF
    No fault code found.
    Readiness: 0 1 0 0 0 
    -------------------------------------------------------------------------------
    Adress 91: LT3 Motor        Labels: missing
       Artikelnr SW: 076 906 022 P    HW: 076 906 022 G
       Component: R5 2,5L EDC A020SG  7730  
       Revision: 24H33---    Serienummer: VWXDZ0J1007072
       Kodning: 0003072
       Verkstad #: WSC 40206 222 99507
       VCID: 2077DCBBF398E91EBB7-8075
    No fault code found.
    -------------------------------------------------------------------------------
    Adress 93: LT3 Startspärr        Labels: AER\2E0-905-865-93.clb
       Artikelnr SW: 2E0 905 865 AD    HW: 906 545 580 8
       Component: IMMO          0805  0815  
       Revision: 00805000    Serienummer: VWXDZ0J1007072
       Verkstad #: WSC 00000 000 00000
       VCID: 6DE9F58F74CAF476401-8038
    Ingen felkod funnen.
    -------------------------------------------------------------------------------
    Adress 94: LT3 Airbag        Labels: missing
       Artikelnr HW: 9064461442
       Verkstad #: WSC 00117 555 00000
       ASAM Dataset: 3 3332
       ROD: CRFT_AB_3_3332.rod (*)
       VCID: 5599BD6F345A5CB6981-8000
    No fault code found.
    -------------------------------------------------------------------------------
    Adress 95: LT3 ESP        Labels: missing
       Artikelnr SW: 9069022800    HW: 0004460153
       Verkstad #: WSC 00117 555 00000
       ASAM Dataset: 3 4101
       ROD: CRFT_ESP_3_4101.rod (*)
       VCID: 043FB02B8F40153EBFF-8051
    1 fel funnet:
    5731 - ACM: Utvecklingsmonitor E 
                Fellampa(MIL) tänd - Test färdigt - Aktiv/Lagrad
    -------------------------------------------------------------------------------
    Adress 96: LT3 Instrument        Labels: missing
       Artikelnr SW: 9069024700    HW: 9069011800
       Verkstad #: WSC 00000 000 00000
       ASAM Dataset: 32 786
       ROD: CRFT_KOMBI_32_786.rod (*)
       VCID: 0539AD2F847A2C36A81-8050
    No fault code found.
    -------------------------------------------------------------------------------
    Adress 99: LT3 Tändningslås        Labels: missing
       Artikelnr HW: 9065455808
       Verkstad #: WSC 00117 555 00000
       ASAM Dataset: 67 257
       ROD: CRFT_EZS_67_257.rod (*)
       VCID: 5599BD6F345A5CB6981-8000
    No fault code found.
    -------------------------------------------------------------------------------
    Adress 9A: LT3 Centrallås        Labels: AER\2E0-905-865-9A.clb
       Artikelnr SW: 2E0 905 865 AD    HW: 906 545 580 8
       Component: HF-FFB        0805  0815  
       Revision: 00805000    Serienummer: 12345678901234
       Verkstad #: WSC 00000 000 00000
       VCID: 6DE9F58F74CAF476401-8038
    No fault code found.
    -------------------------------------------------------------------------------
    Adress 9B: LT3 Förardörr        Labels: missing
       Artikelnr HW: 9068205626
       Verkstad #: WSC 00000 000 00000
       ASAM Dataset: 33 260
       ROD: CRFT_FTUHR_33_260.rod
       VCID: 5599BD6F345A5CB6981-8000
    No fault code found.
    -------------------------------------------------------------------------------
    Adress 9C: LT3 Klimatanl.        Labels: missing
       Artikelnr SW: 2514450200    HW: 9068300885
       ASAM Dataset: 21 2
       ROD: CRFT_KLIMA_21_2.rod (*)
       VCID: F7C557E74E96CEA62AD-80A2
    No fault code found.
    -------------------------------------------------------------------------------
    Adress 9E: LT3 Exvärm (Elek)        Labels: missing
       Artikelnr HW: 9064460029
       Verkstad #: WSC 131071 1023 2097151
       ASAM Dataset: 84 769
       ROD: CRFT_PTC_84_769.rod (*)
       VCID: 5599BD6F345A5CB6981-8000
    No fault code found.
    -------------------------------------------------------------------------------
    Adress 9F: LT3 Statvärm (vatten)        Labels: missing
       Artikelnr HW: 9064460629
       ASAM Dataset: 98 257
       ROD: CRFT_STH_98_257.rod (*)
       VCID: 5599BD6F345A5CB6981-8000
    No fault code found.
    -------------------------------------------------------------------------------
    Adress B1: LT3 Övre konsol        Labels: missing
       Artikelnr HW: 9065453607
       Verkstad #: WSC 00000 000 00000
       ASAM Dataset: 67 3
       ROD: CRFT1_OBF_67_3.rod (*)
       VCID: 5599BD6F345A5CB6981-8000
    No fault code found.
    -------------------------------------------------------------------------------
    Adress B3: LT3 Dragkroksenhet        Labels: missing
       Artikelnr HW: 1695455632
       ASAM Dataset: 21 4
       ROD: CRFT_TRL_21_4.rod (*)
       VCID: 5599BD6F345A5CB6981-8000
    No fault code found.
    -------------------------------------------------------------------------------
    Adress B4: LT3 Elcentral        Labels: missing
       Artikelnr SW: 9064420700    HW: 9065453801
       Verkstad #: WSC 00000 000 00000
       ASAM Dataset: 33 772
       ROD: CRFT_EZE_33_772.rod (*)
       VCID: 5599BD6F345A5CB6981-8000
    Ingen felkod funnen.
    -------------------------------------------------------------------------------
    Adress B6: LT3 Ratt        Labels: missing
       Artikelnr SW: 9065402545    HW: 9065402545
       Verkstad #: WSC 00000 000 00000
       ASAM Dataset: 72 257
       ROD: CRFT_SML_72_257.rod (*)
       VCID: 0827A41BB368315ED37-805D
    No fault code found.
    End   --------------------------------------------------------------------

  2. #2
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    26,412
    Post Thanks / Like
    Blog Entries
    1
    I have no idea what it would be called in the Swedish version you are using, but in the standard English version, which you can download here (and it's no problem to have both Swedish and English versions installed on the same computer), the very first Adaptation channel in the list for that cluster should be called:

    "Service interval extension -Reset"

    -Uwe-

  3. #3
    Verified VCDS User Keithuk's Avatar
    Join Date
    Apr 2014
    Location
    Stoke on Trent, England
    Posts
    674
    Post Thanks / Like
    Welcome to the forum.

    SRI Reset
    New User Keith

    2010 Golf GTD (170) CBBB, 5 Door, Shadow Blue (P6/D5Q), Flat Tyre Indicator, Basic Protection Pack + VCDS.

  4. #4
    Verified VCDS User
    Join Date
    May 2014
    Location
    Stockholm Sweden
    Posts
    6
    Post Thanks / Like

    Red face

    Quote Originally Posted by Uwe View Post
    I have no idea what it would be called in the Swedish version you are using, but in the standard English version, which you can download here (and it's no problem to have both Swedish and English versions installed on the same computer), the very first Adaptation channel in the list for that cluster should be called:

    "Service interval extension -Reset"

    -Uwe-
    I´ve come a bit closer to resetting the SRI using the standard English version I can access the channel ("Service interval extension -Reset konstante"). My question now is what "new value" to store???
    The reported stored value is "0" (dec). I tried to store "0" (dec) as new value, corresponding to "00 00 00 00" Hex but got an Error stating "Request out of range", se log below. I also run a new autoscan using the English version.

    Code:
    Sunday,25,May,2014,11:03:23:23306
    VCDS -- Windows Based VAG/VAS Emulator
    VCDS Version: 12.12.2.0 (x64)
    Data version: 20140212
    
    Dealer/Shop Name: Moonwalk
    
    VIN: WV1ZZZ2EZA6024726   License Plate: GCU210
    Mileage: 106783   Repair Order: 
    
    
    
    --------------------------------------------------------------------------------
    --------------------------------------------------------------------------------
    
    
    UDS Adaptation Channel: Service interval extension -Reset-Konstante
    Stored value 0 
    
    
    --------------------------------------------------------------------------------
    --------------------------------------------------------------------------------
    
    
    Address 96:9069011800 recoded (ADP-Service interval extension -Reset-Konstante) from 0  to

    Code:
    VCDS Version: Release 12.12.2 (x64)
    Data version: 20140212
    Moonwalk
    Sunday,25,May,2014,11:10:00:23306
    
    Chassis Type: 2E (2E - VW Crafter (LT3 / 2006 >))
    Scan: 01 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9E 9F A0 A1 A2 A3
              B0 B1 B2 B3 B4 B5 B6 C1
     
    VIN: WV1ZZZ2EZA6024726   
    -------------------------------------------------------------------------------
    Address 01: Engine (CEC)       Labels: None
       Part No SW: 076 906 022 P    HW: 076 906 022 G
       Component: R5 2,5L EDC A020SG  7730  
       Revision: 24H33---    Serial number: VWXDZ0J1007072
       Coding: 0003072
       Shop #: WSC 40206 222 99507
       VCID: 2077DCBBF098E91EBB7-FFFF
    
    No fault code found.
    Readiness: 0 1 0 0 0 
    
    -------------------------------------------------------------------------------
    Address 91: LT3 Engine        Labels: None
       Part No SW: 076 906 022 P    HW: 076 906 022 G
       Component: R5 2,5L EDC A020SG  7730  
       Revision: 24H33---    Serial number: VWXDZ0J1007072
       Coding: 0003072
       Shop #: WSC 40206 222 99507
       VCID: 2077DCBBF398E91EBB7-8075
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 93: LT3 Immo        Labels: 2E0-905-865-93.clb
       Part No SW: 2E0 905 865 AD    HW: 906 545 580 8
       Component: IMMO          0805  0815  
       Revision: 00805000    Serial number: VWXDZ0J1007072
       Shop #: WSC 00000 000 00000
       VCID: 6DE9F58F74CAF476401-8038
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 94: LT3 Airbag        Labels: None
       Part No HW: 9064461442
       Shop #: WSC 00117 555 00000
       ASAM Dataset: 3 3332
       ROD: CRFT_AB_3_3332.rod (*)
       VCID: 5599BD6F345A5CB6981-8000
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 95: LT3 ESP        Labels: None
       Part No SW: 9069022800    HW: 0004460153
       Shop #: WSC 00117 555 00000
       ASAM Dataset: 3 4101
       ROD: CRFT_ESP_3_4101.rod (*)
       VCID: 043FB02B8F40153EBFF-8051
    
    1 Fault Found:
    5731 - ACM: Development monitor E 
                MIL ON - Test Complete - Active/Stored
    
    -------------------------------------------------------------------------------
    Address 96: LT3 Instruments        Labels: None
       Part No SW: 9069024700    HW: 9069011800
       Shop #: WSC 00000 000 00000
       ASAM Dataset: 32 786
       ROD: CRFT_KOMBI_32_786.rod (*)
       VCID: 0539AD2F847A2C36A81-8050
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 99: LT3 Ign. Switch        Labels: None
       Part No HW: 9065455808
       Shop #: WSC 00117 555 00000
       ASAM Dataset: 67 257
       ROD: CRFT_EZS_67_257.rod (*)
       VCID: 5599BD6F345A5CB6981-8000
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 9A: LT3 Central Locks        Labels: 2E0-905-865-9A.clb
       Part No SW: 2E0 905 865 AD    HW: 906 545 580 8
       Component: HF-FFB        0805  0815  
       Revision: 00805000    Serial number: 12345678901234
       Shop #: WSC 00000 000 00000
       VCID: 6DE9F58F74CAF476401-8038
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 9B: LT3 Driver Door        Labels: None
       Part No HW: 9068205626
       Shop #: WSC 00000 000 00000
       ASAM Dataset: 33 260
       ROD: CRFT_FTUHR_33_260.rod
       VCID: 5599BD6F345A5CB6981-8000
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 9C: LT3 HVAC        Labels: None
       Part No SW: 2514450200    HW: 9068300885
       ASAM Dataset: 21 2
       ROD: CRFT_KLIMA_21_2.rod (*)
       VCID: F7C557E74E96CEA62AD-80A2
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 9E: LT3 Aux.heat (elec)        Labels: None
       Part No HW: 9064460029
       Shop #: WSC 131071 1023 2097151
       ASAM Dataset: 84 769
       ROD: CRFT_PTC_84_769.rod (*)
       VCID: 5599BD6F345A5CB6981-8000
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 9F: LT3 Stat.heat (water)        Labels: None
       Part No HW: 9064460629
       ASAM Dataset: 98 257
       ROD: CRFT_STH_98_257.rod (*)
       VCID: 5599BD6F345A5CB6981-8000
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address B1: LT3 Upper Console        Labels: None
       Part No HW: 9065453607
       Shop #: WSC 00000 000 00000
       ASAM Dataset: 67 3
       ROD: CRFT1_OBF_67_3.rod (*)
       VCID: 5599BD6F345A5CB6981-8000
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address B3: LT3 Trailer Module        Labels: None
       Part No HW: 1695455632
       ASAM Dataset: 21 4
       ROD: CRFT_TRL_21_4.rod (*)
       VCID: 5599BD6F345A5CB6981-8000
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address B4: LT3 Central Elec.        Labels: None
       Part No SW: 9064420700    HW: 9065453801
       Shop #: WSC 00000 000 00000
       ASAM Dataset: 33 772
       ROD: CRFT_EZE_33_772.rod (*)
       VCID: 5599BD6F345A5CB6981-8000
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address B6: LT3 Steering Wheel        Labels: None
       Part No SW: 9065402545    HW: 9065402545
       Shop #: WSC 00000 000 00000
       ASAM Dataset: 72 257
       ROD: CRFT_SML_72_257.rod (*)
       VCID: 0827A41BB368315ED37-805D
    
    No fault code found.
    
    End   ---------------------------------------------------------------------

  5. #5
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    26,412
    Post Thanks / Like
    Blog Entries
    1
    Have you tried typing in '00 00 00 00' (without the quotes)?

    -Uwe-

  6. #6
    Verified VCDS User
    Join Date
    May 2014
    Location
    Stockholm Sweden
    Posts
    6
    Post Thanks / Like
    Yes, I´ve tried 00 00 00 00 - Same result

  7. #7
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    26,412
    Post Thanks / Like
    Blog Entries
    1
    Wait, I'm looking back at one of your previous posts and you already have a Stored Value of 0 in there..?

    Quote Originally Posted by moonwalk View Post
    UDS Adaptation Channel: Service interval extension -Reset-Konstante
    Stored value 0
    Is the service reminder in this vehicle actually on? If so, please make an Adaptation Channel Map so we can see all the channels.

    [Applications]
    [Controller Channel Map]
    - Controller Address = 96
    - Login or security access code: leave blank
    - Function: Adaptation
    - Output: CSV file.
    [Go]

    -Uwe-

  8. #8
    Verified VCDS User
    Join Date
    May 2014
    Location
    Stockholm Sweden
    Posts
    6
    Post Thanks / Like
    Yep, the service reminder is on, at least the LCD tells me the car is overdue for service. I tried to write in a new date and distance since last serice (adpations) but that didn´t help

    Here is the Channel Map
    Code:
    SW:9069011800   HW:9069011800 ---  LT3 Instruments
    	Component:, Coding:
    	32,786,CRFT_KOMBI_32_786.rod (*)
    	Sunday,25,May,2014,20:38:11:23306
    	VCDS Version: Release 12.12.2 (x64)  Data version: 20140212
    	VCID: 0539AD2F847A2C36A81-8050
    	
    (1)-Write service data-Day,25 	
    (2)-Write service data-Month,5 	
    (3)-Write service data-Year,14 	
    (1)-Write time-Hour,20 	
    (2)-Write time-Minute,38 	
    (3)-Write time-Second,11 	
    Write SVD2 Offset Write-Item Value,Write only channel 	
    Write Timer Konstante Write-Item Value,Write only channel 	
    Service interval extension -Reset-Konstante,0 	
    Write service interval extension adaptation channel 38-Min. oil detection,On 	
    Write service interval extension adaptation channel 40-Kilometers since last service,2200 km	
    Write service interval extension adaptation channel 41-Days since last service,27 Days	
    Write service interval extension adaptation channel 42-Driven distance (min) in km,20000 km	
    Write service interval extension adaptation channel 43-Driven distance (max) in km,40000 km	
    Write service interval extension adaptation channel 44-Time (max) in days,744 Days	
    Write service interval extension adaptation channel 45-Oil quality,2 	
    Write service interval extension adaptation channel 47-Soot entry,2.71400 	
    Write service interval extension adaptation channel 48-Thermal load,0.24600 	
    Write service interval extension adaptation channel 49-Time (min) in days,372 Days	
    Write service interval extension adaptation channel 64-dwM2Min in15Ml Minus1905,825 ml	
    Write service interval extension adaptation channel 65-dwM2Max in15Ml Minus1905 1,1110 ml	
    Write service interval extension adaptation channel 66-dwOutM2 in15Ml Minus1905 1,-1905 ml	
    Write service interval extension adaptation channel 68-S Diff SUM in15Ml Minus1905 1,1.40201e+008 ml	
    Write service interval extension adaptation channel 69-Z_Diff_SUM_1,48179

  9. #9
    Verified VCDS User
    Join Date
    Apr 2015
    Location
    Sweden
    Posts
    2
    Post Thanks / Like

    Reset service interval

    Quote Originally Posted by moonwalk View Post
    Yep, the service reminder is on, at least the LCD tells me the car is overdue for service. I tried to write in a new date and distance since last serice (adpations) but that didn´t help

    Here is the Channel Map
    Code:
    SW:9069011800   HW:9069011800 ---  LT3 Instruments
    	Component:, Coding:
    	32,786,CRFT_KOMBI_32_786.rod (*)
    	Sunday,25,May,2014,20:38:11:23306
    	VCDS Version: Release 12.12.2 (x64)  Data version: 20140212
    	VCID: 0539AD2F847A2C36A81-8050
    	
    (1)-Write service data-Day,25 	
    (2)-Write service data-Month,5 	
    (3)-Write service data-Year,14 	
    (1)-Write time-Hour,20 	
    (2)-Write time-Minute,38 	
    (3)-Write time-Second,11 	
    Write SVD2 Offset Write-Item Value,Write only channel 	
    Write Timer Konstante Write-Item Value,Write only channel 	
    Service interval extension -Reset-Konstante,0 	
    Write service interval extension adaptation channel 38-Min. oil detection,On 	
    Write service interval extension adaptation channel 40-Kilometers since last service,2200 km	
    Write service interval extension adaptation channel 41-Days since last service,27 Days	
    Write service interval extension adaptation channel 42-Driven distance (min) in km,20000 km	
    Write service interval extension adaptation channel 43-Driven distance (max) in km,40000 km	
    Write service interval extension adaptation channel 44-Time (max) in days,744 Days	
    Write service interval extension adaptation channel 45-Oil quality,2 	
    Write service interval extension adaptation channel 47-Soot entry,2.71400 	
    Write service interval extension adaptation channel 48-Thermal load,0.24600 	
    Write service interval extension adaptation channel 49-Time (min) in days,372 Days	
    Write service interval extension adaptation channel 64-dwM2Min in15Ml Minus1905,825 ml	
    Write service interval extension adaptation channel 65-dwM2Max in15Ml Minus1905 1,1110 ml	
    Write service interval extension adaptation channel 66-dwOutM2 in15Ml Minus1905 1,-1905 ml	
    Write service interval extension adaptation channel 68-S Diff SUM in15Ml Minus1905 1,1.40201e+008 ml	
    Write service interval extension adaptation channel 69-Z_Diff_SUM_1,48179
    Hi I have exactly the same problem, with my Crafter 2010. Have you find any solution to the problem yet?

  10. #10
    Verified VCDS User
    Join Date
    May 2014
    Location
    Stockholm Sweden
    Posts
    6
    Post Thanks / Like
    Quote Originally Posted by Thomas View Post
    Hi I have exactly the same problem, with my Crafter 2010. Have you find any solution to the problem yet?
    Hi

    Sort of nice to hear Iḿ not the only one having trouble resetting the SRI. To answer Thomas: No, I still haven't found a way to reset my SRI. I called VW to have them just reset but they are not interested in doing it without having performed the service. I can buy in to that but it leaves me with the SRi still reminding me every time i turn on the car. I have also tested later updates of VCDS without success. I have tried the manual reset procedure that can be found on the net - still no progress.
    I would love to write some good news about this, maybe that the car runs nicely and i continue to service the car myself (successfully). VCDS works fine for what it can, except for this particular little feature - resetting the SRI on my 2010 Crafter

    /Arne

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •