- Joined
- Apr 23, 2014
- Messages
- 111
- Reaction score
- 118
- Location
- Toronto, Canada
- VCDS Serial number
- C?ID=11844
Hello All:
I started to test the HEX-NET out on the Lamborghini Aventador today, and after connecting to the interface in Access Point mode, I began an Autoscan.
The VCDS beta application (14.5.2) polled the CAN controller, then the Instrument Cluster Controller, then presented the following application message to me:
I'm perplexed by this, because I have already registered this interface via "the Cloud", etc., as mentioned in a post I made a few days ago.
After the above message was presented, I couldn't do very much else with that car and this interface.
Michael
I started to test the HEX-NET out on the Lamborghini Aventador today, and after connecting to the interface in Access Point mode, I began an Autoscan.
The VCDS beta application (14.5.2) polled the CAN controller, then the Instrument Cluster Controller, then presented the following application message to me:
I'm perplexed by this, because I have already registered this interface via "the Cloud", etc., as mentioned in a post I made a few days ago.
After the above message was presented, I couldn't do very much else with that car and this interface.
Michael