Alright I feel like this has to help me achieve what I am looking for!
I linked the CSV file on my Dropbox for now.. Is there a better way for me to attach this?
Again, looking to deactivate the "parking lights" which are illuminated with the headlights being on and double as the turn signals when activated. I want to keep the turn signals functioning, but the lights off otherwise.
https://www.dropbox.com/s/8gmvclnv1br9k87/A3_Map.CSV?dl=0
AudiSportB5S4: Given that I don't have an A3, I'm extrapolating the nomenclature on a mk7. But I hope the following observations are useful:
First I must apologise, because your original post mentions "corner lights" which I understood to mean "cornering lights". But your clarification above confirms that you are referring to the multipurpose parking lights/turn signal (and I suspect two more functions- see later explanation) in the headlight assembly.It's good therefore that you made an admap of the .
There is much common between your A3 and my mk7 where exterior lighting control is concerned - they both use "Leuchte" programming. I've had a look at your admap for lamps that function both as parking lights and as turn signals in an attempt to locate the correct Leuchte-sets on your A3. The only two Leuchte-sets that satisfy this criteria in your admap are
Leuchte2SL VLB10 (left-side lamp) and
Leuchte3SL VRB21 (right-side lamp). The complete listing for each Leuchte-set from your admap is shown below
I've also identified in the table, the "cluster" of adaption channels that perform the various functions in the Leuchte-set and I have included commentary on what each Leuchte command does. If my identification of the Leuchte-sets is correct, the lamps in question perform the following four functions:
- Parking Lights - Illumination level 30%
- Coming Home/Leaving Home - illumination 30%
- DRL function - level 100%
- Turn Signal - does this function blink counter to the front turn signals?
Is this correct for your car? If so, then I believe that the easiest way to "disable" the parking light function is to alter the associated dimming level to 0%. This is done as follows:
- Change the setting of (6)-Leuchte2SL VLB10-Dimmwert AB 2 from 30 to 0
- Change the setting of (6)-Leuchte3SL VRB21-Dimmwert AB 3 from 30 to 0
Don
PS: with the changes suggested, the lamps will still function as DRLs, CH/LH and Turn Signals