Hi,
Today I fitted a Passat B7 Steering wheel control module into my Passat B6 (2008) with DSG and MFL. Did the cabling and everything seems to work normal. However the G85 steering wheel angle sensor can not be calibrated. I tried using the ABS module, the STG16 and STG44. All say that it is not possible.
How can I perform a G85 Steering Wheel Angle sensor calibration with this new module? Apparently it is different from using the ABS module.
Looking at STG44 Measuring values 007, I don't see the first field changing when I rotate the wheel, however the torque (degr/sec) changes.
I get the following error:
The scan:
Today I fitted a Passat B7 Steering wheel control module into my Passat B6 (2008) with DSG and MFL. Did the cabling and everything seems to work normal. However the G85 steering wheel angle sensor can not be calibrated. I tried using the ABS module, the STG16 and STG44. All say that it is not possible.
How can I perform a G85 Steering Wheel Angle sensor calibration with this new module? Apparently it is different from using the ABS module.
Looking at STG44 Measuring values 007, I don't see the first field changing when I rotate the wheel, however the torque (degr/sec) changes.
I get the following error:
Code:
Address 16: Steering wheel (J527) Labels: 3C0-953-569.clb
Part No SW: 3C9 953 501 BM HW: 5K0 953 569 T
Component: LENKS.MODUL 014 0140
Revision: FF010041 Serial number: 20121204300108
Coding: 399A270002
Shop #: WSC 00015 115 08193
ASAM Dataset: EV_VW360SteerWheelUDS A03004
ROD: EV_VW360SteerWheelUDS.rod
VCID: 75EA286DD4708B965D-8020
Multi Function Steering Wheel Control Module:
Subsystem 1 - Part No SW: 3C8 959 537 B HW: 3C8 959 537 B Labels: 3C8-959-537.CLB
Component: E221__MFL-TAP H4 0021
Coding: E30000
1 Fault Found:
1140738 - Steering angle sensor
B1168 54 [009] - Missing Calibration / Basic Setting
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 207
Mileage: 230821 km
Date: 2016.04.02
Time: 03:01:02
The scan:
Code:
01-Engine -- Status: OK 0000
02-Auto Trans -- Status: OK 0000
03-ABS Brakes -- Status: Malfunction 0010
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
10-Park/Steer Assist -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: Malfunction 0010
17-Instruments -- Status: OK 0000
18-Aux. Heat -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
37-Navigation -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: Malfunction 0010
46-Central Conv. -- Status: OK 0000
47-Sound System -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
53-Parking Brake -- Status: OK 0000
55-Headlight Range -- Status: OK 0000
56-Radio -- Status: OK 0000
5D-Operations -- Status: OK 0000
62-Door, Rear Left -- Status: OK 0000
69-Trailer -- Status: OK 0000
6C-Back-up Cam. -- Status: Malfunction 0010
6D-Trunk Elect. -- Status: OK 0000
72-Door, Rear Right -- Status: OK 0000
77-Telephone -- Status: OK 0000
A5-Frt Sens. Drv. Assist -- Status: OK 0000
Address 44: Steering Assist Labels: 1Kx-909-14x-44.clb
Part No: 1K1 909 144 M
Component: EPS_ZFLS Kl.136 H08 1901
Shop #: WSC 02069 000 90108
VCID: 356AE86D5CF0CB969D-8060
2 Faults Found:
02546 - Steering Limit Stop
005 - No or Incorrect Basic Setting / Adaptation
Freeze Frame:
Mileage: 230810 km
Temperature: 27.0°C
Voltage: 12.20 V
Voltage: 12.00 V
00778 - Steering Angle Sensor (G85)
005 - No or Incorrect Basic Setting / Adaptation
Freeze Frame:
Last edited by a moderator: