Exclusively for R-T forum members, a preview of what what we expect to release as a public Beta version soon -- TEST version 16.3.0.
This includes:
IMPORTANT NOTE: Due to architectural constraints in some of our older interfaces, once you update the firmware in one, it will no longer be compatible with older versions of VCDS on cars that use CAN bus for diagnostics. You will have to use version 16.3 or newer from that point on and won't be able to revert to the previous release version, so don't download this and update your interface firmware unless you're willing to take some risk with a brand-new version that isn't even full public "Beta" yet.
We would appreciate it if you folks did not spread the following link (or the the software itself) around. All support for this TEST version will be right here, in this forum, and nowhere else. Not via e-mail, not over the phone.
If you don't have a really late model car that either doesn't work with your HEX+CAN interface, or that's missing ROD files, there's no compelling reason to download and install this.
By downloading and installing this software, you acknowledge that you've read everything I posted above.
If you have questions about the software itself, please post them right here in this thread.
Please post Auto-Scans from this software in the Reference Scans section of the forum.
-Uwe-
This includes:
- An all-new UDS data set, which should support newer models, including some so-called 2017 models (a MY designation that I personally think is rather premature).
- New "VAG Speak" locations for measuring values on UDS modules. These replace the formerly arbitrary location numbers for data items, which were subject to change with new data sets.
- New HEX+CAN firmware that should make these old work-horse interfaces compatible with MLB2 platform cars.
IMPORTANT NOTE: Due to architectural constraints in some of our older interfaces, once you update the firmware in one, it will no longer be compatible with older versions of VCDS on cars that use CAN bus for diagnostics. You will have to use version 16.3 or newer from that point on and won't be able to revert to the previous release version, so don't download this and update your interface firmware unless you're willing to take some risk with a brand-new version that isn't even full public "Beta" yet.
We would appreciate it if you folks did not spread the following link (or the the software itself) around. All support for this TEST version will be right here, in this forum, and nowhere else. Not via e-mail, not over the phone.
If you don't have a really late model car that either doesn't work with your HEX+CAN interface, or that's missing ROD files, there's no compelling reason to download and install this.
By downloading and installing this software, you acknowledge that you've read everything I posted above.
If you have questions about the software itself, please post them right here in this thread.
Please post Auto-Scans from this software in the Reference Scans section of the forum.
-Uwe-
Last edited: