HEX-USB+CAN VCDS / Problem of processing Throttle Body Alignment

   #1  

8090

Verified VCDS User
Verified
Joined
Mar 2, 2016
Messages
1
Reaction score
0
Location
Hong Kong
VCDS Serial number
C?ID=271507
I have a VW Touareg V6 3.2 / 2005, which need do the Throttle Body Aligment process.

I follow the steps as the vedio show, but the software doesn't work for
several times, a small window pop-up " No Response from Controller " no matter it was
on processing in ADP.OK or ADP.Run. Pls advise how to deal with it.

Regards / S.Chan
 
   #2  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,925
Reaction score
33,652
Location
USA
VCDS Serial number
HC100001
Please post an Auto-Scan so we can see the car in context.

"No Response from Controller" could be something defective in the ECU, or it could be some problem with your PC. You may wish to try a different PC because that's typically easier than changing out the ECU.

-Uwe-
 
Back
Top