long crank cam sensor fault

   #1  

ivagp

Verified VCDS User
Verified
Joined
Jul 15, 2014
Messages
702
Reaction score
285
Location
USA
VCDS Serial number
C?ID=95551
ok guys im sorry I erased the codes, on every test drive get code for cam signal implausible 16725 I think. I lab scoped the sensor it looks good I also ohmed it same as the new sensor. I have not installed the sensor yet. also just one time I got a crank sensor I also scoped that and pattern is also good. torsion values are 1.50 . I read on iatn that their is a tsb that mention to cut the black wire which is the ground and ground the sensor side wire to ground. all three wires are reading 2.5 volts at the cam connector

Code:
Saturday,27,February,2016,13:10:04:49874
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
VCDS Version: 15.7.4.1 (x64)
Data version: 20160216
www.Ross-Tech.com


VIN: 3VWCR31C44M407736   License Plate: 
Mileage: 366370km-227651mi   Repair Order: 



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Chassis Type: 1C (1C - VW New Beetle (1998 > 2010))
Scan: 01 02 03 08 15 17 19 22 25 26 29 35 37 39 46 54 56 65 75
 
VIN: 3VWCR31C44M407736   Mileage: 366370km-227651miles
-------------------------------------------------------------------------------
Address 01: Engine        Labels: 038-906-016-BEW.lbl
   Part No SW: 038 906 016 J    HW: 028 101 114 7
   Component: R4 1.9L EDC G000SG  5443  
   Revision: 12345678    Serial number: VWZ5Z0C8158234
   Coding: 0150031
   Shop #: WSC 00066 000 00000
   VCID: 1B3E29A7D96712E68B-5120

No fault code found.
Readiness: 0 0 0 0 1 

-------------------------------------------------------------------------------
Address 03: ABS Brakes        Labels: 1C0-907-37x-ASR.lbl
   Part No: 1C0 907 379 K
   Component: ASR FRONT MK60      0103  
   Coding: 0018945
   Shop #: WSC 00066 000 00000
   VCID: 3260E403AEEDB3AEB8-513C

1 Fault Found:
01314 - Engine Control Module 
            013 - Check DTC Memory - Intermittent

-------------------------------------------------------------------------------
Address 15: Airbags        Labels: 1T0-909-605.lbl
   Part No: 6Q0 909 605 AB
   Component: 06 AIRBAG VW71      0509  
   Coding: 0012342
   Shop #: WSC 00066 000 00000
   VCID: 77F61517050F96864F-5120

   Subsystem 1 - Part No: 1C0 959 339 
   Component: BF-Gewichtsens. 004 0004

1 Fault Found:
00591 - Seat Belt Switch; Driver (E24) 
            006 - Short to Plus - Intermittent

-------------------------------------------------------------------------------
Address 17: Instruments        Labels: 1C0-920-x4x.lbl
   Part No: 1C0 920 951 A
   Component: KOMBI+WEGFAHRS. M73 V02  
   Coding: 11232
   Shop #: WSC 00000  
   VCID: 1F461DB79D7F0EC667-4B00
   3VWCR31C44M407736     VWZ5Z0C8158234

1 Fault Found:
00771 - Fuel Level Sensor (G) 
            30-10 - Open or Short to Plus - Intermittent

-------------------------------------------------------------------------------
Address 19: CAN Gateway        Labels: 6N0-909-901-19.lbl
   Part No: 6N0 909 901 
   Component: Gateway K<->CAN    V022  
   Coding: 00006
   Shop #: WSC 00066  
   VCID: 70E42E0B3061C1BE8E-4AE6

No fault code found.

-------------------------------------------------------------------------------
Address 46: Central Conv.        Labels: 1C0-959-799.lbl
   Part No: 1C0 959 799 G
   Component: 2K Komfortgerát HLO 0004  
   Coding: 00064
   Shop #: WSC 00066  
   VCID: 3B7EC92729A772E66B-4AE6

   Subsystem 1 - Part No: 1C2959802A
   Component: 2K Tõrsteuer.FS KLO 0202  

   Subsystem 2 - Part No: 1C2959801A
   Component: 2K Tõrsteuer.BF KLO 0202  

4 Faults Found:
01330 - Central Control Module for Central Convenience (J393) 
            53-10 - Supply Voltage Too Low - Intermittent
00928 - Locking Module for Central Locking; Front Driver Side (F220) 
            54-10 - Incorrectly Equipped - Intermittent
00929 - Locking Module for Central Locking; Front Passenger Side (F221) 
            54-10 - Incorrectly Equipped - Intermittent
01044 - Control Module Incorrectly Coded 
            35-00 -  - 

-------------------------------------------------------------------------------
Address 56: Radio        Labels: 1J0-035-18x-56.lbl
   Part No: 1C0 035 157 D
   Component:  Radio DE2         0006  
   Coding: 06031
   Shop #: WSC 00066  
   VCID: 1D3A27BF97731CD675-5196

No fault code found.

End-------------------------(Elapsed Time: 04:44)--------------------------
eading 2.5 volts.
 
Last edited by a moderator:
  • Like
Reactions: Uwe
   #2  

ivagp

Verified VCDS User
Verified
Joined
Jul 15, 2014
Messages
702
Reaction score
285
Location
USA
VCDS Serial number
C?ID=95551
so my ? is that the correct fix to ground the black wire
 
   #3  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
49,245
Reaction score
33,798
Location
USA
VCDS Serial number
HC100001
All three reading 2.5V sure sounds like a missing ground to me.

-Uwe-
 
   #4  

Jack@European_Parts

Gone But Not Forgotten
Professional VCDS User
Joined
Jan 29, 2014
Messages
21,923
Reaction score
9,308
Location
Montgomery, NY, USA
VCDS Serial number
C?ID=57337
It would be best to ground wires based on PIN # and using the WD to verify.
 
   #5  

vu2gte

Verified VCDS User
Verified
Joined
Dec 15, 2015
Messages
56
Reaction score
17
Location
India
VCDS Serial number
C?ID=262838
Actually as far as I know VAG use brown for ground and black for ignition switched positive.
 
   #6  

Jack@European_Parts

Gone But Not Forgotten
Professional VCDS User
Joined
Jan 29, 2014
Messages
21,923
Reaction score
9,308
Location
Montgomery, NY, USA
VCDS Serial number
C?ID=57337
Actually as far as I know VAG use brown for ground and black for ignition switched positive.
Yes this is a Bosch standard, however here in the USA and elsewhere people use Black as ground and not terminal 15 always ......and that includes VW-Audi.

That's why always use the WD PIN for PIN locations........
 
Back
Top