Results 1 to 3 of 3

Thread: autoscan

  1. #1
    Verified VCDS User
    Join Date
    Nov 2014
    Location
    Cornish (USA)
    Posts
    96
    Post Thanks / Like

    autoscan

    When running autoscan on my 2002 1.8 Audi A 4 it hangs up on module #46 and doesn't finish the autoscan. I can select the module and check the fault codes by entering it manually. Any help will be greatly appreciated thank you.

  2. #2
    FoRT jyoung8607's Avatar
    Join Date
    Feb 2014
    Location
    Cincinnati, OH
    Posts
    2,408
    Post Thanks / Like
    Mobile (web-based) or Desktop?

    Please post as much of the Auto-Scan as you're able to obtain, plus what you're able to save to a log from address 46 directly. The exact controller part number, slaves present, fault codes present, etc may have some influence on your problem, so we'll need that scan data to try to help.

    Jason

  3. Likes Uwe, Eric liked this post
  4. #3
    Verified VCDS User
    Join Date
    Nov 2014
    Location
    Cornish (USA)
    Posts
    96
    Post Thanks / Like
    It was done on a mobile device tomorrow I'll try the laptop if that doesn't work I'll get the info you asked for thanks.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •