Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: 2003-2004 MK4 Golf Service Reset

  1. #1
    Verified VCDS-Lite User
    Join Date
    Jun 2015
    Location
    UK, Crawley
    Posts
    29
    Post Thanks / Like

    2003-2004 MK4 Golf Service Reset

    Hi bit of a silly question but how can I reset the service light with VCD Lite.
    I have seen links for 1999-2000 but not for my model.
    I own 2003-2004 Mk4 Golf 180psi and I have just done a full service and used longlife oil.

  2. #2
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    24,166
    Post Thanks / Like
    Blog Entries
    1
    A simple reset should just be:
    [Select]
    [17-Instruments]
    [Adaptation]
    Channel 02 -> Make it 0.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  3. Likes Jetta ,97 liked this post
  4. #3
    Verified VCDS-Lite User
    Join Date
    Jun 2015
    Location
    UK, Crawley
    Posts
    29
    Post Thanks / Like
    Thanks for the Very quick reply. But will that set the longlife oil too?

  5. #4
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    24,166
    Post Thanks / Like
    Blog Entries
    1
    It won't change whatever the cluster is currently set to. That's why it's a "simple reset".

    If you want more info than that, please post an Auto-Scan so we can see what cluster you have.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  6. #5
    Verified VCDS-Lite User
    Join Date
    Jun 2015
    Location
    UK, Crawley
    Posts
    29
    Post Thanks / Like
    On thread Error 01176 on this forum is a Autoscan from my car. yet can post a updated one if requested
    Code:
    VCDS-Lite Version: Release 1.2
    Monday, 23 November 2015, 13:50:04:29282
    
    
    Chassis Type: 01 - My Golf
    Scan: 01,03,08,15,17,19,46,56
     
    -------------------------------------------------------------------------------
    Address 01: Engine       Labels: 06A-906-032-AJQ.LBL
       Controller: 06A 906 032 MJ
       Component: 1.8L R4/5VT         0003
       Coding: 11510
       Shop #: WSC 01266
       VCID: 72972BA92DB7
       WVWZZZ1JZ4W112895     VWZ6Z0C0133447
    No fault code found.
    Readiness: 0000 0000
    
    -------------------------------------------------------------------------------
    Address 03: ABS Brakes       Labels: None
       Controller: 1C0 907 379 M
       Component: ESP FRONT MK60      0102
       Coding: 0019970
       Shop #: WSC 01266
       VCID: 341BEDB11723
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 08: Auto HVAC       Labels: 3Bx-907-044.LBL
       Controller: 3B1 907 044 C
       Component: CLIMATRONIC     C 2.0.0
       Coding: 11000
       Shop #: WSC 01266
       VCID: 213514E5B8D1
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 15: Airbags       Labels: 6Q0-909-605-VW5.LBL
       Controller: 1C0 909 605 A
       Component: 27 AIRBAG VW51 01   0008
       Coding: 12855
       Shop #: WSC 01266
       VCID: 22371BE9BDD7
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 17: Instruments       Labels: 1J0-920-xx5-17.LBL
       Controller: 1J0 920 926 A
       Component: KOMBI+WEGFAHRS. RB8 V29
       Coding: 05414
       Shop #: WSC 00000
       VCID: 282309C1DBEB
       WVWZZZ1JZ4W112895     VWZ6Z0C0133447
    1 Fault Found:
    01176 -  Key
                07-10 -  Signal too Low - Intermittent
    
    -------------------------------------------------------------------------------
    Address 19: CAN Gateway       Labels: 6N0-909-901-19.LBL
       Controller: 6N0 909 901 
       Component: Gateway K<->CAN    0001
       Coding: 00006
       Shop #: WSC 01266
       VCID: F093A1A1A3BB
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 46: Central Conv.       Labels: 1C0-959-799.LBL
       Controller: 1C0 959 799 B
       Component: 1X KomfortgerŠt HLO 0003
       Coding: 00259
       Shop #: WSC 54146
       VCID: 361FD7B9015F
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 56: Radio       Labels: 1J0-035-18x-56.LBL
       Controller: 1J0 035 186 D
       Component:  RADIO SON         0004
       Coding: 01403
       Shop #: WSC 01266
       VCID: 263F07F9D1FF
    No fault code found.
    
    End   --------------------------------------------------------------------------------------------------
    Last edited by Uwe; 02-21-2016 at 09:38 AM. Reason: QUOTE -> CODE

  7. #6
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    24,166
    Post Thanks / Like
    Blog Entries
    1
    OK, your cluster appears to be coded for Flexible (Long Life) service intervals.

    If you have more questions, please look at Adaptation Channels 40 - 44 and tell us the Stored Value in each one.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  8. #7
    Verified VCDS-Lite User
    Join Date
    Jun 2015
    Location
    UK, Crawley
    Posts
    29
    Post Thanks / Like
    ok i looked at channels 40-44. channel 40 set to 0, 41 set to 0, 42 set to 15, 43 set to 15, 44 set to 365

    so 42+43 set to 30, 44 set to 730?

  9. #8
    Verified VCDS-Lite User
    Join Date
    Jun 2015
    Location
    UK, Crawley
    Posts
    29
    Post Thanks / Like
    I'll take that as a yes.
    I also notice a pop up, saying I need to do edit the channels in a order?

  10. #9
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    24,166
    Post Thanks / Like
    Blog Entries
    1
    Pardon me for taking some time away from my computer on a Sunday.

    40 is Distance since Service (in hundreds of km)
    41 is Time since Service (in days)
    42 is Minimum Distance to Service (in thousands of km)
    43 is Maximum Distance to Service (in thousands of km)
    44 is Maximum Time to Service (in days)

    For Flexible intervals on a Petrol engine, standard values would be:
    42 = 15
    43 = 30
    44 = 730

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  11. #10
    Verified VCDS-Lite User
    Join Date
    Jun 2015
    Location
    UK, Crawley
    Posts
    29
    Post Thanks / Like
    Quote Originally Posted by Uwe View Post
    Pardon me for taking some time away from my computer on a Sunday.
    I was shocked I got a reply in the first place as it was a sunday. Thanks Uwe. I would be lost with out you.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •