Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: Hello

  1. #11
    Verified VCDS User
    Join Date
    Dec 2015
    Location
    Canada
    Posts
    292
    Post Thanks / Like
    ok, have i filled your head with more confusion and wonder yet? but that is more help then you have got from http://www.passatworld.com/forums/vo...t-go-away.html



    1 more thing you can try.... did you u check your spare tire's pressure?
    DISCLAIMER: All of the foregoing is based on a quick google search, so it may be totally incorrect. Hopefully somebody with more knowledge can offer more reliable info

    Cheers.

  2. #12
    Verified VCDS User
    Join Date
    Jan 2016
    Location
    Newfoundland, Canada
    Posts
    7
    Post Thanks / Like
    Hey,

    thanks for the tips! I really appreciate the help

    I did review
    http://wiki.ross-tech.com/wiki/index...on_Recognition
    but it didn't have much that really helped,

    I did reset the [09] BCM, but that did not seem to make any difference.

    I took a look at :
    http://forums.ross-tech.com/showthre...th-VCDS-mk6-VW
    and I was wondering about the CAN gateway, but my car doesn't seem to have the same options in it -
    Tomorrow I will have to take another look. This one might lead somewhere.

    I'll also be driving a couple of hours in the car tomorrow, so we will see if that changes anything.


    The spare tire shouldn't matter [correct me if I'm wrong] but its the indirect system, so data is only collected through
    the ABS.....

    Hopefully I"ll get a chance this weekend to poke around more!

    Thanks again
    _ _ _ _

    2013 VW CC

  3. Likes Welder75 liked this post
  4. #13
    Verified VCDS User
    Join Date
    Dec 2015
    Location
    Canada
    Posts
    292
    Post Thanks / Like
    Not sure, maybe someone can verify this. you have your TPMS enabled through [4C]. Have you tried enabling TPMS through Address 65: Tire Pressure (J502) and disable [4C] because it obviously can't be reached there. If it is [4C] then either your coding changes on [19] are wrong or module is fried or wiring issues. see WD trace and test all.
    Last edited by Welder75; 01-23-2016 at 03:22 AM.
    DISCLAIMER: All of the foregoing is based on a quick google search, so it may be totally incorrect. Hopefully somebody with more knowledge can offer more reliable info

    Cheers.

  5. #14
    Verified VCDS User
    Join Date
    Dec 2015
    Location
    Canada
    Posts
    292
    Post Thanks / Like
    Read this thread! http://forums.ross-tech.com/showthre...an-TPMS-Module

    It answered my questions about [4C] and [65] aswell.

    and the guy posted his solution! but unlike you he had a faulty for the sensor.


    i would still think its bad coding somewhere!

    Go through 17-Instruments, 19-CAN Gateway and 03-ABS long coding. Make sure you have TPMS checked in each module
    Last edited by Welder75; 01-23-2016 at 10:08 AM.
    DISCLAIMER: All of the foregoing is based on a quick google search, so it may be totally incorrect. Hopefully somebody with more knowledge can offer more reliable info

    Cheers.

  6. #15
    Verified VCDS User
    Join Date
    Jan 2016
    Location
    Newfoundland, Canada
    Posts
    7
    Post Thanks / Like
    Thanks,

    I went through my codinglog and reverted eveything i could find back to its original values, no difference.
    The TPMS is not shown in either the 19-Can Gateway or the 03-ABS, but does appear in the 17-insturments and 46-Central Conv.
    There, I disabled, restarted the car, and re-enabled it - but still the same errors.
    _ _ _ _

    2013 VW CC

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •