-
Originally Posted by
zacharyprice
By bench checking the
ECU I assume he is referring to removing it and connecting power in a setup on a bench but I do not have that luxury as I don't have that sweet of a setup. I'll have to get creative in order to pull that off. .
Kitchen table works fine. You just need a battery, wires, ECM, and your VCDS. have your WD to confirm your pins for power, ground and can-bus on your ECM and your VCDS interface cable. when u cut your wires, dont bare the ends. just slide the end of your wire over the pins on VCDS and ecm. power it up. try to connect on VCDS as usual.
DISCLAIMER: All of the foregoing is based on a quick google search, so it may be totally incorrect. Hopefully somebody with more knowledge can offer more reliable info
Cheers.
-
Verified VCDS User
Just a quick update fellas, I am working on this this weekend now that I can finally get some daylight and time off. I'll post some updates shortly. Thanks again everyone for the help.
"Teamwork makes the dream work!"
-
Verified VCDS User
Originally Posted by
Jack@European_Parts
Proper repair manual and
WD can be had here........
www.erwin.vw.com
Print to PDF!
Thanks Jack! Looks like the Golf version is the one I needed. Combining through them as we speak.
"Teamwork makes the dream work!"
-
Post Thanks / Like - 2 Likes
Reply With Quote
