Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: Lane assist calibration

  1. #1
    Verified VCDS User
    Join Date
    Dec 2015
    Location
    France
    Posts
    9
    Post Thanks / Like

    Lane assist calibration

    Hello,

    Is it possible to make the calibration of the camera on MQB plateform with vagcom?

    there are different menu

    Resetting of all adaptations values
    (It's OKay i understand)

    Search calibration target
    (it's okay i have the mask pattern for calibration)

    But
    Static calibration (customer service) and Static calibration (end of assembly line) , do not operate , error error error.

    So it possible to do this on vagcom ?
    If we can , can we have explication ?

    thank you

  2. #2
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    25,055
    Post Thanks / Like
    Blog Entries
    1
    I do not think we have a procedure at this time.

    But here are some threads that you may find interesting:
    http://www.ross-tech.com/Search-Resu...%20calibration

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  3. #3
    Verified VCDS User
    Join Date
    Dec 2015
    Location
    France
    Posts
    9
    Post Thanks / Like
    Thank you Uwe ,

    Now i m sure VAGCOM cant make calibration of lane assist camera.
    For do this we must buy VAGCANPRO or ODIS

  4. #4
    VCDS Distributor
    Join Date
    Feb 2014
    Location
    Denmark
    Posts
    1,773
    Post Thanks / Like
    Well, I have done it with VCDS, on a Skoda Octavia (5E) MQB 2015.
    Do you have the correct equipment ?

  5. Likes Uwe, sam1754 liked this post
  6. #5
    Verified VCDS User
    Join Date
    Dec 2015
    Location
    France
    Posts
    9
    Post Thanks / Like
    Yes i have , i use a poster for calibration.
    First i reset all adaptation
    Second i click on search calibration pattern -> OK
    third i click on Static calibration (customer service) -> ERROR

    Could you explain me how to proceed for the calibration ?

    Thanks
    Last edited by seb60; 01-09-2016 at 11:41 AM.

  7. #6
    Verified VCDS User
    Join Date
    Dec 2015
    Location
    France
    Posts
    9
    Post Thanks / Like
    Try again : REQUEST ERROR SEQUENCE ?
    any help ?

  8. #7
    VCDS Distributor
    Join Date
    Feb 2014
    Location
    Denmark
    Posts
    1,773
    Post Thanks / Like
    Quote Originally Posted by seb60 View Post
    Yes i have , i use a poster for calibration.
    And is everything correct made or is it original ?
    Any pictures ?

    Quote Originally Posted by seb60 View Post
    Try again : REQUEST ERROR SEQUENCE ?
    Please describe exactly procedure you are doing, and screen shots.

  9. Likes Uwe, sam1754 liked this post
  10. #8
    Verified VCDS User
    Join Date
    Dec 2015
    Location
    France
    Posts
    9
    Post Thanks / Like
    Hello
    I use home made Calibration poster , i ll post picture when i ll be at home.

    For procedure distance between poster and center of front wheels 1m50.
    poster correctly adujsted .
    On vcds i enter the security code accès 20103 .
    Click on basic setting

    In basic setting i have select search Target Calibration -> ok finished
    After i have select static Calibration (customer service) ~> message recquest sequence error
    Last edited by seb60; 01-11-2016 at 05:13 AM. Reason: Misstake

  11. #9
    Verified VCDS User
    Join Date
    Dec 2015
    Location
    France
    Posts
    9
    Post Thanks / Like
    ???
    poster is ok ? so what wrong?

  12. #10
    Verified VCDS User
    Join Date
    Dec 2015
    Location
    France
    Posts
    9
    Post Thanks / Like
    Calibration DONE with ODIS , with VAGCOM lost of time , and not able to do that propeply ..........

  13. Likes LN-TAL, sam1754 liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •