Lane assist calibration

[seb60]

Hello,

Is it possible to make the calibration of the camera on MQB plateform with vagcom?

there are different menu

Resetting of all adaptations values
(It's OKay i understand)

Search calibration target
(it's okay i have the mask pattern for calibration)

But
Static calibration (customer service) and Static calibration (end of assembly line) , do not operate , error error error.

So it possible to do this on vagcom ?
If we can , can we have explication ?

thank you

[Uwe]

I do not think we have a procedure at this time.

But here are some threads that you may find interesting:
http://www.ross-tech.com/Search-Resu...%20calibration

-Uwe-

[seb60]

Thank you Uwe ,

Now i m sure VAGCOM cant make calibration of lane assist camera.
For do this we must buy VAGCANPRO or ODIS

[NEtech]

Well, I have done it with VCDS, on a Skoda Octavia (5E) MQB 2015.
Do you have the correct equipment ?

[seb60]

Yes i have , i use a poster for calibration.
First i reset all adaptation
Second i click on search calibration pattern -> OK
third i click on Static calibration (customer service) -> ERROR

Could you explain me how to proceed for the calibration ?

Thanks

[seb60]

Try again : REQUEST ERROR SEQUENCE ?
any help ?

[NEtech]

Yes i have , i use a poster for calibration.

And is everything correct made or is it original ?
Any pictures ?

Try again : REQUEST ERROR SEQUENCE ?

Please describe exactly procedure you are doing, and screen shots.

[seb60]

Hello
I use home made Calibration poster , i ll post picture when i ll be at home.

For procedure distance between poster and center of front wheels 1m50.
poster correctly adujsted .
On vcds i enter the security code accès 20103 .
Click on basic setting

In basic setting i have select search Target Calibration -> ok finished
After i have select static Calibration (customer service) ~> message recquest sequence error

[seb60]

???
poster is ok ? so what wrong?

[seb60]

Calibration DONE with ODIS , with VAGCOM lost of time , and not able to do that propeply ..........