Page 3 of 3 FirstFirst 123
Results 21 to 24 of 24

Thread: Lane assist calibration

  1. #21
    Verified VCDS User sam1754's Avatar
    Join Date
    Mar 2019
    Location
    France
    Posts
    119
    Post Thanks / Like
    First, have a good target.
    You must have your car's model software on your A5 camera (for values calcul).
    Enter good values for wheel edge housing on Adaptations with security access.
    Control camera height calculated by controller with real value.
    Adjust values if needed to obtain the good camera height.
    Then:
    Basic settings -> search target (to recognize it) -> initial online calibration (to calculate camera's angles, which will change as you drive and the car moves) -> static calibration... finished
    It took about two minutes... after a couple of days scratching head.

    Then you drive on straight's roads and dynamic calibration will be done correctly. Straighter the road is, quicker the calibration will be.

    No need to run EAL calibration, it's done for blank cameras.

    Hope it will help some people who go crazy with it. To repeat what Downtime said, it's really not a rocket science!

  2. Likes Uwe liked this post
  3. #22
    Verified VCDS User
    Join Date
    Mar 2016
    Location
    UK
    Posts
    164
    Post Thanks / Like
    Not specific to the A5 Front Camera but I built my own Rear View Camera board as I do a lot of RVC retrofits and while other software can "inject" calibration sets into the 6C camera, I prefer a real board so I built this with adjustable feet, circular spirit levels and bars for the Laser Measure device etc (which I own already).

    https://1drv.ms/u/s!Ag0nrdg-XWqwgZIz...pJyWw?e=gQxRiO

    I built this directly from duplicating the genuine VAS kit.

    I'm currently building the same for A5 Camera calibration board.

    Thanks

    Andy
    Q7 272PS | ABT Tuned to 325PS / 680Nm | Tech Pack | Dynamic Pack | Matrix Lights | Pan Roof | Trailer | Drv+Pass Mem Seats | TV | N-Vision | BOSE | DVD Changer | Homelink | Soft Door Close | Heat+Sound Ins Glass | Priv Glass | Heated Windscreen | Heated Steer Wheel | Adv Key | Elec Boot Cover | Side Assist | Air Suspension | Ambient Lighting | Heated+Fold Mirrors | Park Assist Pack | Load Fix Kit | Black Turbine Alloys | Matte Black Wrap

  4. Likes downtime, MartinsX, darkchina811, sam1754 liked this post
  5. #23
    Verified VCDS User sam1754's Avatar
    Join Date
    Mar 2019
    Location
    France
    Posts
    119
    Post Thanks / Like
    It's really near the original board. Just one thing I add is that the board should be non reflective. I printed it on a TIVEK sheet. It's important to avoid any parasitic lights.
    But it's really a good job, thanks for sharing your board.
    Could you add measures to duplicate it?

  6. #24
    Verified VCDS User
    Join Date
    Mar 2016
    Location
    UK
    Posts
    164
    Post Thanks / Like
    Quote Originally Posted by sam1754 View Post
    It's really near the original board. Just one thing I add is that the board should be non reflective. I printed it on a TIVEK sheet. It's important to avoid any parasitic lights.
    But it's really a good job, thanks for sharing your board.
    Could you add measures to duplicate it?
    Thansk sam1754

    Yes, it is a little reflective but does work ok. I could always put a sheet of non-reflective clear film over the top to remove that if needed

    Dimensions are very exact for the printed sheet.

    74.80 Inches x 27.56 Inches

    Andy
    Q7 272PS | ABT Tuned to 325PS / 680Nm | Tech Pack | Dynamic Pack | Matrix Lights | Pan Roof | Trailer | Drv+Pass Mem Seats | TV | N-Vision | BOSE | DVD Changer | Homelink | Soft Door Close | Heat+Sound Ins Glass | Priv Glass | Heated Windscreen | Heated Steer Wheel | Adv Key | Elec Boot Cover | Side Assist | Air Suspension | Ambient Lighting | Heated+Fold Mirrors | Park Assist Pack | Load Fix Kit | Black Turbine Alloys | Matte Black Wrap

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •