Hi, I just change a ABS control unit because it had a problem with a rear left speed sensor reading, I bought a new ABS Unit from ECS Tuning but I have this trouble code:
Here the Advanced ID:
Code:
Monday,05,May,2014,16:55:32:36145
VCDS Version: Release 12.12.2
JJIMENEZ SERVICIO TECNICO
Address 03: ABS Brakes Labels: 1K0-907-379-60EC1F.clb
Control Module Part Number: 1K0 907 379 AP HW: 1K0 907 379 AP
Component and/or Version: ESP MK60EC1 H45 0107
Software Coding: 143B600D492600FD281206E7921B0041B100
Work Shop Code: WSC 00066 123 12345
VCID: 800FC0C6138EB21E1B7-80D5
1 Fault Found:
00003 - Control Module
005 - No or Incorrect Basic Setting / Adaptation
Freeze Frame:
Fault Status: 01100101
Fault Priority: 1
Fault Frequency: 1
Reset counter: 43
Mileage: 47208 km
Time Indication: 0
Freeze Frame:
Count: 16387
Count: 12
Count: 12800
Count: 143
Count: 49152
Count: 0
Count: 0
Count: 3072Here the Advanced ID:
Code:
Monday,05,May,2014,16:58:16:36145
VCDS Version: Release 12.12.2
Address 03: ABS Brakes
Control Module Part Number: 1K0 907 379 AP
Component and/or Version: ESP MK60EC1 H45 0107
Software Coding: 143B600D492600FD281206E7921B0041B100
Work Shop Code: WSC 00066
VCID: 800FC0C6138EB21E1B7-80D5
Advanced Identification
Identification: TT1-000
Revision: 00H45001
Date: 13.12.13
Manufacturer number: 0102
Test stand number: 0001
Flash Status
Programming Attempts(application): 0
Successful Attempts(application): 0
Programming Status: 00000000
Flash Date: 2000.00.00
Flash Tool Code: 00000 000 00000
Misc.
Hardware number: 1K0 907 379 AP
Workshop System Name: -----
VCDS Info:
Labels: 1K0-907-379-60EC1F.clb
Thanks guys!
Last edited by a moderator:
