Hello ross tech forums. I recnetly purchased a pair of North American BiXenons with LED DRLs to retrofit my 2012 GLI Autobahn without Nav. Long story short I tocuehd the dreaded byte 18. The DRLs on the xenkns never did turn on but normal beam and highs would turn on without coding.
Now I still have the halogen lights, but no halogen DRLs come on, and the interior tail lights aren't on unless I'm braking. I cleared the error codes (wish I hadn't). Now I'm just trying to get the car back to stock, halogen DRLs on with the tail light as factory. Or learn the coding to get the BiXenons working without all the sensors (afs etc) installed.
I changed the drop down in byte 18 and that's that started this. I tried to do the recode trick (coding to 00, key, locking doorks etc) but that didn't work. Sort of at a loss right now.
Any advice greatly appreciated
Now I still have the halogen lights, but no halogen DRLs come on, and the interior tail lights aren't on unless I'm braking. I cleared the error codes (wish I hadn't). Now I'm just trying to get the car back to stock, halogen DRLs on with the tail light as factory. Or learn the coding to get the BiXenons working without all the sensors (afs etc) installed.
I changed the drop down in byte 18 and that's that started this. I tried to do the recode trick (coding to 00, key, locking doorks etc) but that didn't work. Sort of at a loss right now.
Any advice greatly appreciated