Module 09 not accessible with HEX-NET interface
- Thread starter LN-TAL
- Start date
- Status
What version of the utility are you using?
I think you need 2.007 which can be downloaded from this location: http://vcds-cloud.com/HexNetConfigV2.007.jar
It worked now, and also, now, I am able to get into module 09 with my HEX-NET interface. Good job 
And I guess this is a "working or not working" thing so there is no point in making another debug file and send you ? (you know, some things can work, but not optimum).
And I guess this is a "working or not working" thing so there is no point in making another debug file and send you ? (you know, some things can work, but not optimum).I tested to clear some fault codes from module 09 now with my HEX-NET, and it seems like there is some error. After some seconds there is a fault messsage "The request to Clear Codes was not acknowledged by the control module". But it seems to actually clear the codes. I will send you a log by email. Note that on the log I send you there was actually no fault codes to delete, so I just hit "clear codes" even if there was no fault to clear, and it still gives me the same error message.
- Joined
- Jan 29, 2014
- Messages
- 3,910
- Reaction score
- 5,807
- Location
- Lansdale, PA, USA
- VCDS Serial number
- HC800000
Thanks again for the files (both email and online). The same issue that was present while reading the module ID was also affecting the clear DTC acknowledgement. Shaun has a fix in the works, but while we're there, are you seeing abnormal behavior for any other function in that module?
I have tested, and it works perfect now. I have used 15 min. to mess around in module 09, and everything is working as expected with the HEX-NET interface. Good job guys
- Status