Results 1 to 3 of 3

Thread: 5F module values

  1. #1
    Pirate Xander409's Avatar
    Join Date
    Jul 2015
    Location
    Italy
    Posts
    5
    Post Thanks / Like

    5F module values

    Hi all,

    Today i finally received my VCDS cable, and also my Audi music interface kit, to be installed on my A3 8v.
    But obvuisly I have a problem: my radio main unit (8V0035889) does not support the AMI connector.

    So, I have decided to buy a different main unit version (8V0035840) that has that connector.

    Probably this installation requires a coding. I have the code to install AMI, but I don't know if it is required a code also for the main unit.

    My question is: is there a guide or forum user collection, that specify for each byte of the 5F module, at which installation correspond. How i can know which byte I have to change to install that new main unit?

    Thanks

  2. #2
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    23,087
    Post Thanks / Like
    Blog Entries
    1
    Please post an Auto-Scan so we can see what the car is made of.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  3. #3
    Pirate Xander409's Avatar
    Join Date
    Jul 2015
    Location
    Italy
    Posts
    5
    Post Thanks / Like
    Hi, and thanks for the reply

    this is my autoscan:

    Code:
    EDIT:  Nope.  Data from pirated versions of VCDS is not welcome here.
    Last edited by Uwe; 09-01-2015 at 01:20 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •