Results 1 to 10 of 24

Thread: 2008 A4 B7 2.0T - cranks, no start, no error codes

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #22
    Verified VCDS User
    Join Date
    Aug 2015
    Location
    USA
    Posts
    12
    Post Thanks / Like
    Quote Originally Posted by Jack@European_Parts View Post
    Question ?
    If you spray carb cleaner in intake will engine run briefly after cranked?
    Haven't had a chance yet to do so, it's me alone doing the work, have no helper to crank engine while I'm spraying
    Quote Originally Posted by Jack@European_Parts View Post
    What are plugs condition and do you have spark?
    Plugs are brand new. Yes, I have spark on all 4, that was one of the first things I checked.
    Quote Originally Posted by Jack@European_Parts View Post
    Does the engine have bent valves?
    Nope - didn't see any of that when I cleaned them (I did it when I replaced the injectors with brand new ones)
    Quote Originally Posted by Jack@European_Parts View Post
    Have you checked Key-ways on cam sprocket or crank gear......... and did you check pin float on cam adjuster unit.
    These are in the back, right where the HPFP is, right? Haven't opened that end yet.
    Last edited by A4Trial; 08-14-2015 at 10:45 AM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •