Results 1 to 6 of 6

Thread: 2006 Audi A4 Cabriolet Radio Problems Bose Symphony II

  1. #1
    Verified VCDS User
    Join Date
    Aug 2014
    Posts
    4
    Post Thanks / Like

    2006 Audi A4 Cabriolet Radio Problems Bose Symphony II

    My steering wheel radio controls stopped working, I turned off back on, it worked fine.

    Next day my wife drove it, and it stopped and she couldn't get it to work, but the controls on the head unit wouldn't work either. Turning off car or radio didn't work.

    I just scanned it, and here are my faults:

    -------------------------------------------------------------------------------
    Address 0F: Digital Radio Labels: 8E0-035-593-XM.lbl
    Part No: 8E0 035 593 E
    Component: SDAR XM 0080
    VCID: 2B5524CED9B40A79EB2-50AE

    1 Fault Found:
    02635 - Tuner Not Enabled/Activated
    35-10 - - - Intermittent

    -------------------------------------------------------------------------------
    Address 16: Steering wheel Labels: 8E0-953-549.lbl
    Part No: 8E0 953 549 N
    Component: Lenks·ulenmodul 0611
    Coding: 02041
    Shop #: WSC 00672
    VCID: 3E731D9A3AC68FD15CC-4B00

    1 Fault Found:
    01304 - Radio
    49-10 - No Communications - Intermittent

    -------------------------------------------------------------------------------
    Address 56: Radio Labels: 8E0-035-1xx-56.lbl
    Part No: 8E0 035 195 H
    Component: symphony II PM6 0460
    Coding: 00205
    Shop #: WSC 23296
    VCID: 2C5727D2DCBA0D41E28-5092

    1 Fault Found:
    65535 - Internal Control Module Memory Error
    37-00 - Faulty

    -------------------------------------------------------------------------------

    Please help!

  2. #2
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    24,559
    Post Thanks / Like
    Blog Entries
    1
    Looks to me like the radio is in its deathbed. You can try cold-booting it, but I doubt that's going to fix it.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  3. Likes prayharder liked this post
  4. #3
    Verified VCDS User
    Join Date
    Aug 2014
    Posts
    4
    Post Thanks / Like
    Sad day. Is there a way to do any tests on the radio?

    Also, if it's dead. I am thinking about a pioneer with car play, like this one: Pioneer AVIC-5000NEX
    http://www.crutchfield.com/p_1305000...X.html?tp=5684

    Or the AVIC-7000NEX

    http://www.crutchfield.com/p_1307000...ol%7cFFCarPlay

    Do these work with the steering wheel controls?

    Thanks!

  5. #4
    Verified VCDS User
    Join Date
    Aug 2014
    Posts
    4
    Post Thanks / Like
    Quote Originally Posted by Uwe View Post
    Looks to me like the radio is in its deathbed. You can try cold-booting it, but I doubt that's going to fix it.

    -Uwe-
    So I was finally able to get the radio out, and look what I found.



    As I understand those are the CAN BUS wires.

  6. Likes Uwe liked this post
  7. #5
    Verified VCDS User
    Join Date
    Aug 2014
    Posts
    4
    Post Thanks / Like
    So, I am trying to figure out why someone would tap the two CAN wires ???

  8. #6
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    24,559
    Post Thanks / Like
    Blog Entries
    1
    Well, one could passively listen to the messages on the Infotainment CAN, or one could inject new messages, to display stuff in the cluster that it wouldn't normally display. I think there have been a few third-party products made for Audis that do this.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •