Results 1 to 6 of 6

Thread: Audi A4 Avant retrofit 6D Trunk Electric

  1. #1
    Pirate
    Join Date
    Jun 2015
    Location
    Italy
    Posts
    4
    Post Thanks / Like

    Audi A4 Avant retrofit 6D Trunk Electric

    Hello,
    I have a problem with my 2014 Audi A4 Avant.
    I do retrofit electric trunk and keyless.

    I replaced my 46 Central Conv. 8K0907064JD with new 8K0907064JF from Audi A5 which had keyless but not the electric trunk.
    I was in Audi for unlocking CP, I did not make the configuration of the factory, I transferred the long queues and the channel values ​​of my 46.

    I installed the electric servomotors in the trunk.
    In 19 CAN Gateway I activated the 6D Trunk Elect.

    In the 46 Central Conv. I tried to turn the Byte 6 Bit 5 CLOSING AID, does not accept encoding and returns the following error:
    Coding rejected:
    Error 31: request out of range


    19 CAN Gateway:
    00317 - Rear Lid Control Module (J605)
    004 - No Signal / Communication



    6D Trunk Elect.
    2 Faults Found:
    16347 - Control Module - EEPROM Error
    014 - Defective


    02364 - Closing Assistance
    008 - Signal implausible



    The problem is due to the fact that the control unit 46 Central Conv. comes from A5 without electric trunk?

    Can I change the channels of 46 Central Conv. in order to make it work?


    Help me please, thank you.


    Ettore

  2. #2
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    23,876
    Post Thanks / Like
    Blog Entries
    1
    Please post a complete Auto-Scan so we can see all this in context.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  3. #3
    Pirate
    Join Date
    Jun 2015
    Location
    Italy
    Posts
    4
    Post Thanks / Like
    Quote Originally Posted by Uwe View Post
    Please post a complete Auto-Scan so we can see all this in context.

    -Uwe-
    Code:
    Deleted.   Data from pirated copies of VCDS is not welcome here.
    Last edited by Uwe; 06-09-2015 at 08:42 PM. Reason: CODE tags

  4. #4
    Pirate
    Join Date
    Jun 2015
    Location
    Italy
    Posts
    4
    Post Thanks / Like
    Quote Originally Posted by Uwe View Post
    Please post a complete Auto-Scan so we can see all this in context.

    -Uwe-
    I took a new 46 Central Conv., but I keep getting this error:

    [Deleted]

    How can I fix this error?
    Last edited by Uwe; 06-09-2015 at 08:43 PM.

  5. #5
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    23,876
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by Ettore View Post
    How can I fix this error?
    I'm afraid you're not going to get any help here while you're using a pirated version of the product we make our living from.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  6. #6
    Pirate
    Join Date
    Jun 2015
    Location
    Italy
    Posts
    4
    Post Thanks / Like
    Quote Originally Posted by Uwe View Post
    I'm afraid you're not going to get any help here while you're using a pirated version of the product we make our living from.

    -Uwe-
    Is not a valid software?
    A colleague of mine had a scan with his PC, I thought it was original, sorry.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •