Results 1 to 3 of 3

Thread: 2013 Jetta Locking Confirmation (Remote Control) Type of Confirmation

  1. #1
    New User
    Join Date
    May 2015
    Location
    USA
    Posts
    1
    Post Thanks / Like

    2013 Jetta Locking Confirmation (Remote Control) Type of Confirmation

    I am looking through your documentation and before I purchase, I'd like to know how to perform this function on the 2013 Jetta S. Here is what I am looking for on the Golf instructions but I am looking for the instructions to do it for a 2013 Jetta S. Any explicit instructions so when I buy it I can just do it? It's the main purchase reason as it's very loud in my neighborhood.


    http://wiki.ross-tech.com/wiki/index...orn_Adjustment

    Channel 010: Locking Confirmation (Remote Control)

    Type of Confirmation when locking the Car via Remote Control.

    0 = Confirmation OFF
    1 = Confirmation via Blinker/Turn Signal
    2 = Confirmation via Beep/Horn
    3 = Confirmation via Beep/Horn & Blinker/Turn Signal
    Last edited by Squirrelly; 05-03-2015 at 01:01 PM.

  2. #2
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    24,701
    Post Thanks / Like
    Blog Entries
    1
    Your 2013 will be an Mk.6 and won't have a separate Comfort Module like the Mk.5 stuff you're looking at above. On the Mk.6 that functionality was all integrated into the BCM at address 09. I'm confident that locking confirmation can be made silent because it's actually illegal to do it audibly in some markets, but I can't tell you exactly how to do it without knowing exactly which BCM is installed in your car, i.e. without seeing a scan.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  3. #3
    Ross-Tech Employee Dana's Avatar
    Join Date
    Jan 2014
    Location
    United States
    Posts
    3,654
    Post Thanks / Like
    Although we would need to see a scan from this exact car .. this scan should be pretty close for reference:

    http://forums.ross-tech.com/showthre...ull=1#post8543

    That vehicle should use a Polo based BCM and this Tweaks page applies: VW Jetta (16/AJ) Tweaks

    You should be able to enable/disable "Acoustical Locking Confirmation (Horn) active" in the Long Coding Helper in addition to Adaptation channel 009 labeled "Central Locking: Audible Unlocking Confirmation" within VCDS.

  4. Likes Uwe liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •