Results 1 to 10 of 10

Thread: Why can't I run basic settings on throttle body.?

  1. #1
    Verified VCDS User
    Join Date
    Apr 2015
    Location
    UK
    Posts
    44
    Post Thanks / Like

    Why can't I run basic settings on throttle body.?

    Hi guys/girls.

    I am attempting to follow these instructions provided by Ross-Tech:
    http://wiki.ross-tech.com/wiki/index...BPJ/BPY/BWA%29

    I go to Engine 01 > Basic Settings 04 and enter group 60 and it shows no detail in any of the boxes, they are empty.
    The only ones that would seem available are about 6 in a drop down list to do with Lambda and O2 I think.

    My plan was to remove the throttle body and clean it, then once done I was going to run basic settings to set the alignment. Why on Earth can I not do anything other than read live data and fault codes on this cable.?
    Why am I being limited to almost no use at all.?

    Can someone suggest anything please?

    Regards,
    Rob

  2. #2
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    26,030
    Post Thanks / Like
    Blog Entries
    1
    Is this your 2007 8P A3, with 2.0 TFSI engine?

    Are you doing this with the ignition on, but engine NOT running?

    How about the other preconditions on this page?

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  3. #3
    Verified VCDS User
    Join Date
    Apr 2015
    Location
    UK
    Posts
    44
    Post Thanks / Like
    Hey Uwe.
    Yes that's right......you have a very good memory.!!!
    Yes, I have just ignition on, engine NOT running.
    I didn't see these instructions before, so thanks for the direction to it.! Appreciated.
    So do I need to try changing the settings in options to either KWP-1281 or KWP-2089.?
    I just have it on the default at the moment, which has neither of these selected.

    Cheers mate.

  4. #4
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    26,030
    Post Thanks / Like
    Blog Entries
    1
    No, just leave the stuff on the Options screen alone, with default settings.

    Is your ECU free of fault codes? If in doubt, clear them first. Verify that the ECU sees appropriate battery voltage and coolant temperature in MVBs. Then follow the instructions step by step and tell us exactly where things aren't working as expected. Maybe make a screen-shot where you encounter a problem.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  5. #5
    Verified VCDS User
    Join Date
    Apr 2015
    Location
    UK
    Posts
    44
    Post Thanks / Like
    So mine is like this at the moment (top picture)
    http://www.ross-tech.com/vcds-lite/manual/options.html

  6. #6
    Verified VCDS User
    Join Date
    Apr 2015
    Location
    UK
    Posts
    44
    Post Thanks / Like
    Well.....it lists a malfunction with the instrument cluster from 2010, which is way before I got the car. I clear all DTC's but this one remains after another scan,

  7. #7
    Verified VCDS User
    Join Date
    Apr 2015
    Location
    UK
    Posts
    44
    Post Thanks / Like
    Code:
    Thursday,23,April,2015,17:39:01:21513
    VCDS -- Windows Based VAG/VAS Emulator
    VCDS Version: 14.10.2.0
    Data version: 20150311
    www.Ross-Tech.com
    
    
    VIN: WAUZZZ8P48A028762   License Plate: HJ57 LRE
    Mileage: 146380km-90956mi   Repair Order: 
    
    
    
    --------------------------------------------------------------------------------
    --------------------------------------------------------------------------------
    
    
    Chassis Type: 8P (1K0)
    Scan: 01 03 08 09 15 16 17 19 25 42 44 46 47 52 56 62 72
    
    VIN: WAUZZZ8P48A028762   Mileage: 146380km-90956miles
    
    01-Engine -- Status: OK 0000
    03-ABS Brakes -- Status: OK 0000
    04-Steering Angle -- Status: OK 0000
    08-Auto HVAC -- Status: OK 0000
    09-Cent. Elect. -- Status: OK 0000
    15-Airbags -- Status: OK 0000
    16-Steering wheel -- Status: OK 0000
    17-Instruments -- Status: Malfunction 0010
    19-CAN Gateway -- Status: OK 0000
    25-Immobilizer -- Status: OK 0000
    42-Door Elect, Driver -- Status: Malfunction 0010
    44-Steering Assist -- Status: OK 0000
    46-Central Conv. -- Status: OK 0000
    47-Sound System -- Status: OK 0000
    52-Door Elect, Pass. -- Status: OK 0000
    56-Radio -- Status: OK 0000
    62-Door, Rear Left -- Status: OK 0000
    72-Door, Rear Right -- Status: OK 0000
     
    -------------------------------------------------------------------------------
    Address 01: Engine        Labels: 06F-907-115-AXX.lbl
       Part No SW: 8P0 907 115 T    HW: 8P0 907 115 B
       Component: 2.0l R4/4V TFSI     0010  
       Revision: 5BH16---    Serial number: AUX7Z0G5FNR0NV
       Coding: 0103000318070060
       Shop #: WSC 06314 000 00000
       VCID: 43854D0D02C1D13933D-8016
    
    No fault code found.
    Readiness: 0000 0000
    
    -------------------------------------------------------------------------------
    Address 03: ABS Brakes        Labels: 1K0-907-379-MK60-F.lbl
       Part No SW: 1K0 907 379 AC    HW: 1K0 907 379 AC
       Component: ESP FRONT MK60      0101  
       Revision: 00H11001    
       Coding: 0021122
       Shop #: WSC 06314 000 00000
       VCID: 73E5DDCD12E121B963D-8026
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 08: Auto HVAC        Labels: 8P0-820-043.lbl
       Part No SW: 8P0 820 043 AG    HW: 8P0 820 043 AG
       Component: KlimavollautomatH19 0420  
       Revision: 158225      Serial number: 8P0820043AG   
       Shop #: WSC 06314 000 00000
       VCID: 71E9D7C568FD13A9911-8024
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 09: Cent. Elect.        Labels: 8P0-907-279-30-H.lbl
       Part No SW: 8P0 907 279 K    HW: 8P0 907 279 K
       Component: Bordnetz-SG     H54 2501  
       Revision: 00H54000    Serial number: 00000007304768
       Coding: 018C0F01B0141000471600001600000000085E175C010000000000000000
       Shop #: WSC 06314 000 08192
       VCID: 458153150CF5EF091D9-8010
    
       Subsystem 1 - Part No: 8P2 955 119 E  Labels: 1KX-955-119.CLB
       Component: Wischer AU350   H01 0130  
       Coding: 00062736
       Shop #: WSC 06314  
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 15: Airbags        Labels: 8P0-959-655-94.lbl
       Part No SW: 8P0 959 655 L    HW: 8P0 959 655 L
       Component:    Airbag 9.41  H01 4210  
       Revision: 91H01421    Serial number: 003CP00021FF  
       Coding: 0071612
       Shop #: WSC 06314 000 00000
       VCID: 4B95652D2A911979CBD-801E
    
       Subsystem 1 - Serial number: 6332DRB405720D13E
    
       Subsystem 2 - Serial number: 6342DRB40572892CT
    
       Subsystem 3 - Serial number: 63528RB402A1B676N
    
       Subsystem 4 - Serial number: 63628RB402A2028DI
    
       Subsystem 5 - Serial number: 63747RB40283E866U
    
       Subsystem 6 - Serial number: 63847RB40283F5CF1
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 16: Steering wheel        Labels: 8P0-953-549-F.lbl
       Part No SW: 8P0 953 549 F    HW: 8P0 953 549 F
       Component: J0527           H36 0070  
       Coding: 0002012
       Shop #: WSC 06314 000 00000
       VCID: 4189470518DDC329211-8014
    
       Subsystem 1 - Part No: XXXXXXXXXXX 
       Component: E0221           H02 0030
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 17: Instruments        Labels: 8P0-920-xxx-17-MY8.clb
       Part No SW: 8P0 920 981 M    HW: 8P0 920 981 M
       Component: KOMBIINSTR. VDO H20 0640  
       Revision: D0H20001    Serial number: 2245G001001524
       Coding: 0004428
       Shop #: WSC 29611 067 57207
       VCID: 428B48091DDBD83138B-8017
    
    1 Fault Found:
    00003 - Control Module 
                014 - Defective
                 Freeze Frame:
                        Fault Status: 01101110
                        Fault Priority: 1
                        Fault Frequency: 1
                        Reset counter: 255
                        Mileage: 47040 km
                        Time Indication: 0
                        Date: 2010.01.31
                        Time: 15:01:03
    
    
    -------------------------------------------------------------------------------
    Address 19: CAN Gateway        Labels: 1K0-907-530-V3.clb
       Part No SW: 1K0 907 530 L    HW: 1K0 907 951 
       Component: J533__Gateway   H15 0180  
       Revision:   H15       Serial number: 1400K076248417
       Coding: E9807F061002022103
       Shop #: WSC 06314 000 00000
       VCID: 306F12C1A3775AA1DEF-8065
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 25: Immobilizer        Labels: 1K0-920-xxx-25.clb
       Part No SW: 8P0 920 981 M    HW: 8P0 920 981 M
       Component: KOMBIINSTR. VDO H20 0640  
       Revision: D0H20001    Serial number: AUX7Z0G5FNR0NV
       Shop #: WSC 00000 000 00000
       VCID: 428B48091DDBD83138B-8017
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 42: Door Elect, Driver        Labels: 8P0-959-801-MAX3.lbl
       Part No SW: 8P0 959 801 J    HW: 8P0 959 801 J
       Component: Tuer-SG         H03 0040  
       Coding: 0004784
       Shop #: WSC 06314 000 00000
       VCID: 428B48091DDBD83138B-8017
    
    1 Fault Found:
    00932 - Electric Window Motor; Drivers Side (V147) 
                005 - No or Incorrect Basic Setting / Adaptation
    
    -------------------------------------------------------------------------------
    Address 44: Steering Assist        Labels: 1Kx-909-14x-44.clb
       Part No: 1K2 909 144 M
       Component: EPS_ZFLS Kl.079 H08 1901  
       Shop #: WSC 02069 000 90108
       VCID: 366324D941137491843-8063
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 46: Central Conv.        Labels: 8P0-959-433.lbl
       Part No: 8P0 959 433 J
       Component:    KSG          H10 0080  
       Coding: 1980202002186D0985054C9FC637
       Shop #: WSC 06314 000 00000
       VCID: 43854D0D02C1D13933D-8016
    
       Subsystem 1 - Part No: 1K0 951 605 C
       Component: LIN BACKUP HORN H03 1301
    
       Subsystem 2 - Part No: 1K0 907 719 C
       Component: Neigungssensor  005 0003
    
       Subsystem 3 - Part No: 8P0 951 177 
       Component: Innenraumueberw.H04 0020
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 47: Sound System        Labels: 8Px-035-382.lbl
       Part No SW: 8P4 035 382 D    HW: 8P4 035 382 D
       Component: AB2 SUBWOOFERBOXH06 0180  
       Revision: 00005       Serial number: 30674702917822
       Shop #: WSC 00000 000 00000
       VCID: 356123D55C157F898D9-8060
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 52: Door Elect, Pass.        Labels: 1K0-959-702-MAX3.lbl
       Part No SW: 8P0 959 802 J    HW: 8P0 959 802 J
       Component: Tuer-SG         H03 0040  
       Coding: 0004784
       Shop #: WSC 06314 000 00000
       VCID: 43854D0D02C1D13933D-8016
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 56: Radio        Labels: 8J0-035-1xx-56.clb
       Part No SW: 8P0 035 186 G    HW: 8P0 035 186 G
       Component: R Concert2+     H17 0240  
       Revision: 00H17000    Serial number: AUZ1Z3G9136051
       Coding: 0210111
       Shop #: WSC 06314 000 00000
       VCID: 366324D941137491843-8063
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 62: Door, Rear Left        Labels: 8P4-959-801.lbl
       Part No SW: 8P4 959 801 E    HW: 8P4 959 801 E
       Component: Tuer-SG         H04 0040  
       Coding: 0000144
       Shop #: WSC 06314 000 1012544
       VCID: 4189470518DDC329211-8014
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 72: Door, Rear Right        Labels: 8P4-959-802.lbl
       Part No SW: 8P4 959 802 E    HW: 8P4 959 802 E
       Component: Tuer-SG         H04 0040  
       Coding: 0000144
       Shop #: WSC 06314 000 1012544
       VCID: 428B48091DDBD83138B-8017
    
    No fault code found.
    
    End-------------------------(Elapsed Time: 02:00)--------------------------
    Last edited by Uwe; 05-01-2015 at 04:23 PM. Reason: fixed CODE tags

  8. #8
    Verified VCDS User
    Join Date
    Apr 2015
    Location
    UK
    Posts
    44
    Post Thanks / Like
    Hey Uwe.
    Funny this, plugged in, went to the basic settings again and this time it showed me the data, and I did the adaptation.....hoorah.!
    I can only think that it was a code for the Intake temperature sensor which I activated last night after a bit of testing.

    I'm guessing that I cleared the code AFTER trying the initial DTC auto scan earlier.

    Afterwards I started the car to move it and now when I rev the car up to about 3000rpm and release the throttle it doesn't do the bump and exhaust note I was experiencing beforehand ;o)

    Just wanted to thank you for your time and keep up the good work Uwe.!!!
    No doubt I'll have some more questions for you soon, lol.

  9. Likes Uwe liked this post
  10. #9
    Verified VCDS User victor35ma's Avatar
    Join Date
    Nov 2014
    Location
    Los Angeles CA.
    Posts
    104
    Post Thanks / Like
    Quote Originally Posted by Uwe View Post
    Is this your 2007 8P A3, with 2.0 TFSI engine?

    Are you doing this with the ignition on, but engine NOT running?

    How about the other preconditions on this page?

    -Uwe-
    KOER ( Key On Engine Running )
    KOEO ( Key On Engine On )

    preconditions on ja ja ja KOPO maybe???? some friend of mine call this predictions on.
    I am new to VCDS but... I will master it.

  11. #10
    Verified VCDS User
    Join Date
    Jul 2014
    Location
    Yorkshire
    Posts
    96
    Post Thanks / Like
    KOEO ( Key On Engine On )
    ?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •