Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Basic Settings wont work

  1. #1
    Verified VCDS User
    Join Date
    Mar 2014
    Location
    North West UK
    Posts
    17
    Post Thanks / Like

    Basic Settings wont work

    Audi A3 2.0 tdi 170 ps BMN engine. I replaced my turbo ,just the central core but it came with the vane adjusting screw not set so I need to use Engine ,Basic Settings,Group 11(Charge Pressure Control) to cycle the turbo to reset the screw to give me 80 mbar change between vanes open and closed.
    The four windows initially show 800rpm ------- 1009.6mbar(actual) 3.451v(duty cycle)
    I press "ON" ,press brake and throttle and instead of the turbo cycling and revs going to 1400 rpm the engine stays at idle and the windows change to:
    1.0 BRAKES CLUTCH1 OPERATE
    I`m new to VCDS so I`m probably doing something wrong.Could anyone enlighten me please?
    SCAN below
    Thanks
    Neil

    Code:
    Wednesday,26,March,2014,19:10:30:44437
    VCDS -- Windows Based VAG/VAS Emulator
    VCDS Version: 12.12.2.0
    Data version: 20140212
    
    Dealer/Shop Name: Bold Engineering
    
    VIN: WAUZZZ8P17A136397   License Plate: N8OLD
    Mileage: 142250km-88390mi   Repair Order: 
    
    
    
    --------------------------------------------------------------------------------
    --------------------------------------------------------------------------------
    
    
    Chassis Type: 8P (1K0)
    Scan: 01 03 08 09 15 16 17 19 22 25 42 44 46 52 56 62 72
    
    VIN: WAUZZZ8P17A136397   Mileage: 142250km/88390miles
    
    01-Engine -- Status: OK 0000
    03-ABS Brakes -- Status: OK 0000
    04-Steering Angle -- Status: OK 0000
    08-Auto HVAC -- Status: OK 0000
    09-Cent. Elect. -- Status: OK 0000
    15-Airbags -- Status: OK 0000
    16-Steering wheel -- Status: OK 0000
    17-Instruments -- Status: OK 0000
    19-CAN Gateway -- Status: OK 0000
    22-AWD -- Status: Malfunction 0010
    25-Immobilizer -- Status: OK 0000
    42-Door Elect, Driver -- Status: OK 0000
    44-Steering Assist -- Status: OK 0000
    46-Central Conv. -- Status: OK 0000
    52-Door Elect, Pass. -- Status: OK 0000
    56-Radio -- Status: Malfunction 0010
    62-Door, Rear Left -- Status: OK 0000
    72-Door, Rear Right -- Status: OK 0000
     
    -------------------------------------------------------------------------------
    Address 01: Engine        Labels: 03G-906-018-BMN.clb
       Part No SW: 03G 906 018 DN    HW: 03G 906 018 DN
       Component: R4 2.0l PPD1.2      4350  
       Revision: --H42---    Serial number: AUX7Z0FDFNC11D
       Coding: 0000072
       Shop #: WSC 66565 257 00032
       VCID: 74E7D3921716BABE8FF-8021
    
    No fault code found.
    Readiness: N/A
    
    -------------------------------------------------------------------------------
    Address 03: ABS Brakes        Labels: 1K0-907-379-MK60-A.lbl
       Part No SW: 1K0 907 379 AB    HW: 1K0 907 379 AB
       Component: ESP 4MOTION MK60    0102  
       Revision: 00H13001    
       Coding: 0023170
       Shop #: WSC 06314 000 00000
       VCID: 72EBD58A6D02B48E9D3-8027
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 08: Auto HVAC        Labels: 8P0-820-043.lbl
       Part No SW: 8P0 820 043 AC    HW: 8P0 820 043 AC
       Component: KlimavollautomatH19 0360  
       Revision: 082189      Serial number: 8P0820043AC   
       Shop #: WSC 06314 000 00000
       VCID: 6DD1C6F6743C6B76401-8038
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 09: Cent. Elect.        Labels: 8P0-907-279-23-H.lbl
       Part No SW: 8P0 907 279 F    HW: 8P0 907 279 F
       Component: Bordnetz-SG     H43 1201  
       Revision: 00H43000    Serial number: 00000006497371
       Coding: 01884F01B014100000160000160000000008FE175C0100
       Shop #: WSC 06314 000 08192
       VCID: 408F4F42132E561EDB7-8015
    
       Subsystem 1 - Part No: 8P2 955 119 E  Labels: 1KX-955-119.CLB
       Component: Wischer AU350   H01 0130  
       Coding: 00062736
       Shop #: WSC 06314  
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 15: Airbags        Labels: 8P0-959-655-94.lbl
       Part No SW: 8P0 959 655 C    HW: 8P0 959 655 C
       Component:    Airbag 9.41  H13 4260  
       Revision: 91H13426    Serial number: 003620G37HZ3  
       Coding: 0071612
       Shop #: WSC 06314 000 00000
       VCID: 428B454A1D22440ECD3-8017
    
       Subsystem 1 - Serial number: 6332DRB404559013A
    
       Subsystem 2 - Serial number: 6342DRB404559113C
    
       Subsystem 3 - Serial number: 63528RB401F2E627R
    
       Subsystem 4 - Serial number: 63628RB401F2E499Z
    
       Subsystem 5 - Serial number: 63729RB401E5BC65.
    
       Subsystem 6 - Serial number: 63829RB401E5BC08Z
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 16: Steering wheel        Labels: 1K0-953-549-MY8.lbl
       Part No SW: 1K0 953 549 AH    HW: 1K0 953 549 AH
       Component: J0527           036 0070  
       Coding: 0000012
       Shop #: WSC 06314 000 00000
       VCID: 78FFE7A20B7EDEDEA37-802D
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 17: Instruments        Labels: 8P0-920-xxx-17-MY7.lbl
       Part No SW: 8P0 920 981 F    HW: 8P0 920 981 F
       Component: KOMBIINSTR. VDO H20 0570  
       Revision: D0H20004    Serial number: 224DF004008288
       Coding: 0005418
       Shop #: WSC 00694 210 83007
       VCID: 3B7538AE7AC835C68E5-806E
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 19: CAN Gateway        Labels: 1K0-907-530-V2.clb
       Part No SW: 1K0 907 530 K    HW: 1K0 907 951 
       Component: J533__Gateway   H12 0170  
       Revision:   H12       Serial number: 3300106B2204E4
       Coding: BD3F034007002103
       Shop #: WSC 06314 000 00000
       VCID: 2F6D1CFEBEB0D96632D-807A
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 22: AWD        Labels: 1K0-907-554.lbl
       Part No: 1K0 907 554 L
       Component: Haldex 4Motion      0116  
       Coding: 0000001
       Shop #: WSC 00000 000 00000
       VCID: 3663299A41EAE8AE71B-8063
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 25: Immobilizer        Labels: 1K0-920-xxx-25.clb
       Part No SW: 8P0 920 981 F    HW: 8P0 920 981 F
       Component: KOMBIINSTR. VDO H20 0570  
       Revision: D0H20004    Serial number: AUX7Z0FDFNC11D
       Shop #: WSC 00000 000 00000
       VCID: 3B7538AE7AC835C68E5-806E
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 42: Door Elect, Driver        Labels: 8P0-959-801-MIN2.lbl
       Part No: 8P0 959 801 H
       Component: Tuer-SG         020 0090  
       Coding: 0000688
       Shop #: WSC 06314 000 00000
       VCID: 408F4F42132E561EDB7-8015
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 44: Steering Assist        Labels: 1Kx-909-14x-44.clb
       Part No: 1K2 909 144 L
       Component: EPS_ZFLS Kl.079 H07 1806  
       Shop #: WSC 06314 000 00000
       VCID: 35612E965CECE3B6781-8060
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 46: Central Conv.        Labels: 8P0-959-433.lbl
       Part No: 8P0 959 433 F
       Component:    KSG          H05 0070  
       Coding: 9980202002186D098505489FC637
       Shop #: WSC 06314 000 00000
       VCID: 3F8D4CBE6ED029E6A2D-806A
    
       Subsystem 1 - Part No: 1K0 951 605 C
       Component: LIN BACKUP HORN H03 1301
    
       Subsystem 2 - Part No: 1K0 907 719 C
       Component: Neigungssensor  005 0003
    
       Subsystem 3 - Part No: 8P0 951 177 
       Component: Innenraumueberw.H04 0020
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 52: Door Elect, Pass.        Labels: 8P0-959-802-MIN2.lbl
       Part No: 8P0 959 802 H
       Component: Tuer-SG         020 0090  
       Coding: 0000688
       Shop #: WSC 06314 000 00000
       VCID: 41894A4618245F16D49-8014
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 56: Radio        Labels: 8J0-035-1xx-56.clb
       Part No SW: 8P0 035 195 G    HW: 8P0 035 195 G
       Component: R Symphony2+    H14 0220  
       Revision: 00H14000    Serial number: AUZ1Z4F9005576
       Coding: 0010301
       Shop #: WSC 06314 000 00000
       VCID: 3663299A41EAE8AE71B-8063
    
    1 Fault Found:
    01044 - Control Module Incorrectly Coded 
                000 - -
                 Freeze Frame:
                        Fault Status: 01100000
                        Fault Priority: 5
                        Fault Frequency: 1
                        Reset counter: 255
                        Time Indication: 15
    
    
    -------------------------------------------------------------------------------
    Address 62: Door, Rear Left        Labels: 8P4-959-801.lbl
       Part No: 8P4 959 801 D
       Component: Tuer-SG         020 0070  
       Coding: 0000144
       Shop #: WSC 06314 000 00000
       VCID: 408F4F42132E561EDB7-8015
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 72: Door, Rear Right        Labels: 8P4-959-802.lbl
       Part No: 8P4 959 802 D
       Component: Tuer-SG         020 0070  
       Coding: 0000144
       Shop #: WSC 06314 000 00000
       VCID: 41894A4618245F16D49-8014
    
    No fault code found.
    
    End   ---------------------------------------------------------------------
    Last edited by Uwe; 04-09-2014 at 03:56 PM. Reason: Wrapped CODE tags around Auto-Scan

  2. #2
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    24,524
    Post Thanks / Like
    Blog Entries
    1
    Hmm. I can't say I've ever done one of these, but it seems to me the ECU is asking you to operate the brakes and the clutch, not the brakes and the throttle.

    Have you tried doing what the ECU is asking?

    -Uwe-

  3. #3
    Verified VCDS User
    Join Date
    Mar 2014
    Location
    North West UK
    Posts
    17
    Post Thanks / Like
    UWE
    Thanks for the quick reply.The writing on the screen says press brakes and throttle.I`ll try brakes and clutch see what happens.
    Neil

  4. #4
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    24,524
    Post Thanks / Like
    Blog Entries
    1
    Well, I can't see what's on your screen, but what you wrote here is:

    1.0 BRAKES CLUTCH1 OPERATE


    -Uwe-

  5. #5
    Verified VCDS User
    Join Date
    Mar 2014
    Location
    North West UK
    Posts
    17
    Post Thanks / Like
    UWE
    It`s underneath the 4 windows.When I click on "Charge Pressure Control" that block changes to "Engine on ,Press On ,press brake and throttle. That`s when all the windows change.When I press Off, they change back to what they were originally.Can`t reply now until tomorrow .
    Thanks
    Neil

  6. #6
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    24,524
    Post Thanks / Like
    Blog Entries
    1
    Niel,

    OK, if you can't get it working tomorrow, please make screen-shots of everything. We'll never be able to reproduce this here since we didn't get any diesels with PPD engine management.

    -Uwe-

  7. #7
    Verified VCDS User
    Join Date
    Mar 2014
    Location
    North West UK
    Posts
    17
    Post Thanks / Like
    UWE
    Sorted. It`s a bit ambiguous as one screen says "brakes and throttle" but windows say "brakes and clutch". Tried brakes and clutch and it works superbly.Managed to set the stop screw correctly ,a job I must say that Audi main dealer failed to do twice.
    Thanks again.
    Neil

  8. Likes Uwe liked this post
  9. #8
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    24,524
    Post Thanks / Like
    Blog Entries
    1
    Neil, you're very welcome.

    Can we impose on you to run it again and make screen-shots so we might see if there's a way for us to correct the apparently misleading "brakes and throttle" message?

    -Uwe-

  10. #9
    Verified VCDS User
    Join Date
    Mar 2014
    Location
    North West UK
    Posts
    17
    Post Thanks / Like
    UWE
    How do I take a screen shot?

  11. #10
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    24,524
    Post Thanks / Like
    Blog Entries
    1
    The PrintScreen button on your keyboard will stuff the entire contents of your screen into the Windows Clipboard. From there, you can paste into Paint or Word or (my personal favorite for this kind of thing) Irfanview, then crop and Save As. If you're saving a screen shot as an image, .PNG is almost always a better choice than .JPG. (but .JPG is better for photos).

    Pro-Tip: If you use Alt + Printscreen, you will get only the currently active window instead of the whole screen.

    -Uwe-

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •