pls scan,i dont know what kind of healights you have know.i dont see this wirings colors in elsa
Audi a3 retrofit halogen-full led
- Thread starter maniken
- Start date
pls scan,i dont know what kind of healights you have know.i dont see this wirings colors in elsa
hi have xenon without AFS
and hi need to conect from light _
pin 1 left and right side together and pin 2 from left and right side together
and put in AFS modul in pin 4 and 5
in pin 4 AFS unit from pin 1 left and right ( yellow /green + gray/yellow)
in pin 5 AFS unit from pin 2 left and right ( green /brown+ gray/brown)
to put new wirea ground to pin 10
power KL 15 from B box in pin 8 ( fuse 5A)
power KL 15 from C box in pin 9 ( fuse 15 A)
hi need to change place ,
now pin 10 on pin 11 ( black/blue)
now pin 9 on pin 13 ( black /white)
now pin 8 on pin 14 ( brown /blue) only US !!!!!!
[U]pin 3 ,4 and 11 headlight not use anymore
[/U]
and hi need to conect from light _
pin 1 left and right side together and pin 2 from left and right side together
and put in AFS modul in pin 4 and 5
in pin 4 AFS unit from pin 1 left and right ( yellow /green + gray/yellow)
in pin 5 AFS unit from pin 2 left and right ( green /brown+ gray/brown)
to put new wirea ground to pin 10
power KL 15 from B box in pin 8 ( fuse 5A)
power KL 15 from C box in pin 9 ( fuse 15 A)
hi need to change place ,
now pin 10 on pin 11 ( black/blue)
now pin 9 on pin 13 ( black /white)
now pin 8 on pin 14 ( brown /blue) only US !!!!!!
[U]pin 3 ,4 and 11 headlight not use anymore
[/U]
Last edited:
Hi Lala,
Thank you for trying to help. I want to confirm that you have full LED headlights installed, yes? (I am retrofitting from Bi-xenon to full LED.)
Please see the below table I created. I hope it is clear. Can you please confirm the table and see my questions below.
| Connect to | Function | |
| LED Pin 1 | AFS unit Pin 4 ?? | AFS module |
| LED Pin 2 | AFS unit Pin 5 ?? | AFS module |
| LED Pin 3 | Not used | |
| LED Pin 4 | Not used | |
| LED Pin 5 | HID Xenon wire 5 (brown) | ground |
| LED Pin 6 | HID Xenon wire 6 (black/yellow) | low beam+ |
| LED Pin 7 | ?? | |
| LED Pin 8 | B box - fuse 5A | KL 15/cornering lamp? |
| LED Pin 9 | C box - fuse 15A | KL 15/cornering lamp? |
| LED Pin 10 | New ground wire | ground |
| LED Pin 11 | HID Xenon wire 10 (black/blue) | DRL+ |
| LED Pin 12 | HID Xenon wire 12 (black/grey) | DRL+ |
| LED Pin 13 | HID Xenon wire 9 (black/white) | DRL turn signal |
| LED Pin 14 | HID Xenon wire 8 (brown/blue) | side marker |
Questions:
1) What is KL 15? Is this cornering light?
2) How do I connect to AFS unit? Do I need new wiring harness to connect?
3) How do I connect LED pin 8 to B box? Do I need new wiring harness to connect?
4) How do I connect LED pin 8 to C box? Do I need new wiring harness to connect?
5) Where does LED pin 7 connect?
6) Where does LED pin 12 connect? When I tested connections, I need BOTH LED pin 11 and pin 12 connected to power for DRL to work.
Thanks so much for your help!
Sanjeev
Hi Maniken. I currently have Bi-Xenon and am converting to full LED. Please see below autoscan, but it will show various faults and incorrect AFS module, as I needed to change wiring and AFS module. My 5F module is also locked out intentionally.
Code:
Saturday,18,April,2015,15:58:04:46498
VCDS -- Windows Based VAG/VAS Emulator
VCDS Version: 15.3.0.0 (x64)
Data version: 20150314
www.Ross-Tech.com
VIN: WAUBFGFF5F1009627 License Plate:
Mileage: 25086km-15587mi Repair Order:
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Chassis Type: FF (5Q0)
Scan: 01 02 03 08 09 15 16 17 19 22 42 44 52 55 5F
VIN: WAUBFGFF5F1009627 Mileage: 25086km-15587miles
01-Engine -- Status: OK 0000
02-Auto Trans -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: Malfunction 0010
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
22-AWD -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
55-Headlight Range -- Status: Malfunction 0010
5F-Information Electr. -- Status: Malfunction 0010
-------------------------------------------------------------------------------
Address 01: Engine (J623-CNTC) Labels: 06K-907-425-V1.clb
Part No SW: 5G0 906 259 A HW: 06K 907 425 B
Component: 2.0l R4 TFSI H13 0002
Revision: --H13---
Coding: 0A1D00124426000F2000
Shop #: WSC 06385 790 00016
ASAM Dataset: EV_ECM20TFS0205G0906259A 001004
ROD: EV_ECM20TFS0205G0906259A.rod
VCID: 2C57477647BE95584B-8079
No fault code found.
Readiness: 1010 1101
-------------------------------------------------------------------------------
Address 02: Auto Trans (J743) Labels: 0D9-927-770.clb
Part No SW: 0D9 300 011 S HW: 02E 927 770 AQ
Component: DQ250-6A MQB H52 4312
Revision: 05852204 Serial number: TFK01402042463
Coding: 0014
Shop #: WSC 04742 780 00200
ASAM Dataset: EV_TCMDQ250021 001001
ROD: EV_TCMDQ250021.rod
VCID: 2541B2522454A41094-8070
No fault code found.
-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104) Labels: 5Q0-907-379.clb
Part No SW: 5Q0 907 379 AA HW: 5Q0 907 379 G
Component: ESC H31 0457
Revision: 00000000 Serial number: 60424000001522
Coding: 13FF6A9234200A75017D030281CA29C8562C5080C08194B4024100588608
Shop #: WSC 06385 790 00016
ASAM Dataset: EV_Brake1UDSContiMK100IPB 033001
ROD: EV_Brake1UDSContiMK100IPB_AU37.rod
VCID: 7BF5B42AF250C2E092-802E
No fault code found.
-------------------------------------------------------------------------------
Address 08: Auto HVAC (E87) Labels: 8V0-820-047.clb
Part No SW: 8V0 820 047 E HW: 8V0 820 047 E
Component: AC Manuell el H11 0052
Revision: 20021000 Serial number: 00000000051347
Coding: 00000004100000000000000000000000
Shop #: WSC 06385 790 00016
ASAM Dataset: EV_AirCondiFrontManAU37X 008018
ROD: EV_AirCondiFrontManAU37X.rod
VCID: 387F6B2683E629F83F-806D
No fault code found.
-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519) Labels: 5Q0-937-08X-MV1.clb
Part No SW: 5Q0 937 085 S HW: 5Q0 937 085 S
Component: BCM MQBAB MNA H16 0124
Serial number: 00011403600588
Coding: 04141A46C041227541C04004511007000000000000000000000000000000
Shop #: WSC 06385 790 00016
ASAM Dataset: EV_BCMCONTI 012001
ROD: EV_BCMBOSCH_AU37.rod
VCID: 49991EE2E80CA07050-801C
Slave 1:
Subsystem 1 - Part No SW: 8V1 955 119 C HW: 8V1 955 119 A
Component: WWS371 140212 041 0585
Serial number: 140217143949
Coding: 0A47F7
Slave 2:
Subsystem 2 - Part No SW: 8U0 955 559 A HW: 8U0 955 559 A
Component: G397_RLS H06 0002
Serial number: 20145817
Coding: 02006C
Slave 3:
Subsystem 3 - Part No SW: 8V0 941 531 K HW: 8V0 941 531 K
Component: E1 - LDS MQB H05 0032
Serial number: 26 11 2013 00000932
Subsystem 4 - Part No SW: 5Q0 951 605 HW: 5Q0 951 605
Component: Sirene, DWA 004 0311
Serial number: 00000000000029008875
Subsystem 5 - Part No SW: 8V3 959 591 HW: 8V3 959 591
Component: J245 PS73.009 H02 0007
Serial number: WOO27317150
Coding: 101F00
2 Faults Found:
18698 - Left LED Module for DRL and Parking Lights
B12EC F2 [009] - Voltage Supply Open or Short to Plus
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 199
Mileage: 25086 km
Date: 2015.04.18
Time: 15:49:33
19210 - Right LED Module for DRL and Parking Lights
B12ED F2 [009] - Voltage Supply Open or Short to Plus
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 199
Mileage: 25086 km
Date: 2015.04.18
Time: 15:49:33
-------------------------------------------------------------------------------
Address 15: Airbags (J234) Labels: 5Q0-959-655.clb
Part No SW: 5Q0 959 655 J HW: 5Q0 959 655 J
Component: AirbagVW20 009 0825
Serial number: 003GCR005X3D
Coding: 9DCCFCC0000000005000001AC24800000065
Shop #: WSC 06385 790 00016
ASAM Dataset: EV_AirbaVW20SMEVW37X 002138
ROD: EV_AirbaVW20SMEVW37X_AU37.rod
VCID: 479D18DAFE18560046-8012
Seat belt tensioner; left:
Subsystem 1 - Part No SW: 5G0 980 945 B HW: 5G0 980 945 B
Component: BeltPretRevFL H35 0341
Serial number: 34178311A20021470231
Coding: 333135
Seat belt tensioner; right:
Subsystem 2 - Part No SW: 5G0 980 946 B HW: 5G0 980 946 B
Component: BeltPretRevFR H35 0341
Serial number: 34178312A19021471240
Coding: 333135
Seat occupant detection; front passenger side:
Subsystem 3 - Part No SW: 5C6 959 339 B HW: 5C6 959 339 B
Component: BF-Gewichtss. H10 0046
Serial number: 6940000Y14000129KJ0N
Coding: 303139
Crash sensor for side airbag; driver side:
Subsystem 4 - Part No SW: ----------- HW: 480 000 402 14
Component: SideSensor_Df 001 0887
Serial number: 357000000002A530DE0J
Coding: 2D2D2D
Crash sensor for side airbag; front passenger side:
Subsystem 5 - Part No SW: ----------- HW: 480 003 101 14
Component: SideSensor_Pf 001 0887
Serial number: 3580000000080094DE0L
Coding: 2D2D2D
Crash sensor for side airbag; rear; driver side:
Subsystem 6 - Part No SW: ----------- HW: 480 400 302 14
Component: SideSensor_Dr 001 6149
Serial number: 3510002C912AB1B2E3CD
Coding: 2D2D2D
Crash sensor for side airbag; rear; passenger side:
Subsystem 7 - Part No SW: ----------- HW: 480 400 302 14
Component: SideSensor_Pr 001 6149
Serial number: 3520002AF12AB1B071A5
Coding: 2D2D2D
Crash sensor for front airbag; driver side:
Subsystem 8 - Part No SW: ----------- HW: 480 402 501 14
Component: FrontSensor_D 001 6149
Serial number: 3550002C712FAE2500B8
Coding: 2D2D2D
Crash sensor for front airbag; front passenger side:
Subsystem 9 - Part No SW: ----------- HW: 480 402 301 14
Component: FrontSensor_P 001 6149
Serial number: 3560002B112FAE208194
Coding: 2D2D2D
No fault code found.
-------------------------------------------------------------------------------
Address 16: Steering wheel (J527) Labels: 5Q0-953-549.clb
Part No SW: 8V0 953 521 CB HW: 5Q0 953 549 C
Component: Lenks. Modul 002 0110
Revision: -------- Serial number: 17021408491100
Coding: A018
Shop #: WSC 06385 790 00016
ASAM Dataset: EV_SMLSKLOMQB 017001
ROD: EV_SMLSKLOMQB_AU37.rod
VCID: 7CF7B736F75EC5D89B-8029
No fault code found.
-------------------------------------------------------------------------------
Address 17: Instruments (J285) Labels: 5G0-920-XXX-17.clb
Part No SW: 8V0 920 960 B HW: 8V0 920 960 B
Component: KOMBI H02 2220
Coding: 0BF518092B80B7050200EA00180000
Shop #: WSC 06385 790 00016
ASAM Dataset: EV_DashBoardVDDMQBAB 008031
ROD: EV_DashBoardVDDMQBAB_AU37.rod
VCID: 3A7B712EBDEA3BE8C9-806F
No fault code found.
-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533) Labels: Redir Fail!
Part No SW: 5Q0 907 530 Q HW: 5Q0 907 530 M
Component: GW MQB High 212 2163
Revision: -------- Serial number: 15021410802100
Coding: 0101000820085A005B00020C180B00000001000000000000000000000000
Shop #: WSC 06385 790 00016
ASAM Dataset: EV_GatewConti 010015
ROD: EV_GatewConti_AU37.rod
VCID: 3F8D003AA6C81EC0FE-806A
Alternator:
Multifunction unit control module:
Subsystem 2 - Part No SW: 8U0 951 528 C HW: 8U0 951 528 C
Component: E221 - MFL H02 0014
Serial number: 07 01 2015 D0012612
No fault code found.
-------------------------------------------------------------------------------
Address 22: AWD (J492) Labels: 0CQ-907-554.clb
Part No SW: 0CQ 907 554 D HW: 0CQ 907 554 D
Component: Haldex4Motion H52 7076
Serial number: HA1-00009.01.14
Coding: 0001
Shop #: WSC 06385 790 00016
ASAM Dataset: EV_AllWheelContrHA1VW37X 002001
ROD: EV_AllWheelContrHA1VW37X_AU21.rod
VCID: 468315DEF9124F08BD-8013
No fault code found.
-------------------------------------------------------------------------------
Address 42: Door Elect, Driver (J386) Labels: 5QX-959-X93-42.clb
Part No SW: 5Q0 959 393 B HW: 5Q0 959 393 B
Component: TSG FS 020 0025
Serial number: 09021401100960
Coding: 00100F204000048000000002
Shop #: WSC 06385 790 00016
ASAM Dataset: EV_DCUDriveSideEWMINKLO 006003
ROD: EV_DCUDriveSideEWMAXCONT.rod
VCID: 3E737D3EA1C217C8F5-806B
No fault code found.
-------------------------------------------------------------------------------
Address 44: Steering Assist (J500) Labels: 5Q0-909-144.clb
Part No SW: 5Q0 909 144 P HW: 5Q0 909 144 P
Component: EPS_MQB_ZFLS 123 1043
Coding: 0102
Shop #: WSC 06385 790 00016
ASAM Dataset: EV_SteerAssisMQB 010031
ROD: EV_SteerAssisMQB.rod
VCID: 418906C2D03C683088-8014
No fault code found.
-------------------------------------------------------------------------------
Address 52: Door Elect, Pass. (J387) Labels: 5QX-959-X92-52.clb
Part No SW: 5Q0 959 392 B HW: 5Q0 959 392 B
Component: TSG BFS 020 0025
Serial number: 01021403111365
Coding: 001007204000048000000002
Shop #: WSC 06385 790 00016
ASAM Dataset: EV_DCUPasseSideEWMINKLO 006003
ROD: EV_DCUPasseSideEWMAXCONT.rod
VCID: 3D717A32ACC40CD0EC-8068
No fault code found.
-------------------------------------------------------------------------------
Address 55: Headlight Range (J431) Labels: 5Q0-907-357.clb
Part No SW: 5Q0 907 357 HW: 6R0 907 357 A
Component: LWR-ECU 005 0080
Revision: -------- Serial number: --------------
Coding: 012A000101000000
Shop #: WSC 06385 790 00016
ASAM Dataset: EV_HeadlRegulVWLWRMQB 001110
ROD: EV_HeadlRegulVWLWRMQB_AU37.rod
VCID: 75E1A212D4749490E4-8020
2 Faults Found:
5276949 - Positioning Motor for Headlight Range Left
C1085 15 [137] - Open or Short to Plus
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 199
5277205 - Positioning Motor for Headlight Range Right
C1086 15 [137] - Open or Short to Plus
MIL ON - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 199
-------------------------------------------------------------------------------
Address 5F: Information Electr.
Cannot be reached
End-------------------------(Elapsed Time: 03:22)--------------------------hello
yes I retrofit full LED light , I have before just like you !
you have lots of question but I try to help
first AFS unit is : Address 55: Headlight Range
now you have in this unit plug in red color
and you need to :
remove out wires from pin 15 & 17 and connect together and put in pin 4
wires from pin 19 & 21 and connect together and put in pin 5
next
you must to pull wires from fuse box C
from SC 37 to left headlight pin 9
from SC 36 to right headlight pin 9
now pin 10 on pin 11 ( black/blue)
now pin 9 on pin 13 ( black /white)
now pin 8 on pin 14 ( brown /blue) only US !!!!!!
pin 3 ,4 and 11 headlight not use anymore
pin 5 ,6, 7 and 12 on headlight dont touch ( use on new light)
now is problem for explain but I try
for pin 8 hedlight
you need to pull witres from B-box in engine space
from SB 32
but if you dont have webasto
yuo dont have holder for SB 32
you need to buy !
then
this power you must get from relay
and again you must to buy holder for relay
when you all buy
next step is :
to get power from B-box
from letter T1 and pull wire to holder relay and put in space 123
, then you need to pull ground to holder relay in space 122,
then you need to get from neighborhood relay from red green wires and pull to holder space 121
when you finish you must to pull wires from space place relay 125 to SB 32 holder
then from this SB 32 to pull wires from left and right side pin 9
after this you need to put thiscoding in BCM :04141A46C041067541C04004511007000000000000000000000000000000
after this you need to go adaptation channel
and change value for front light....
Last edited:
| Connect to | Function | |
| LED Pin 1 | AFS unit Pin 4 ?? | AFS module |
| LED Pin 2 | AFS unit Pin 5 ?? | AFS module |
| LED Pin 3 | Not used | |
| LED Pin 4 | Not used | |
| LED Pin 5 | HID Xenon wire 5 (brown) | ground |
| LED Pin 6 | HID Xenon wire 6 (black/yellow) | low beam+ |
| LED Pin 7 | Ground | |
| LED Pin 8 | B box - fuse 5A | + from b box |
| LED Pin 9 | C box - fuse 15A | + from c box |
| LED Pin 10 | New ground wire | ground |
| LED Pin 11 | HID Xenon wire 10 (black/blue) | DRL+ |
| LED Pin 12 | HID Xenon wire 12 (black/grey) | DRL+ |
| LED Pin 13 | HID Xenon wire 9 (black/white) | DRL turn signal |
| LED Pin 14 | HID Xenon wire 8 (brown/blue) | side marker |
I hope this photo help you!
[/URL][/IMG]
Only one small question. Regarding this picture ^^^^, this is the existing board for B-box in engine space, correct? I do not need to purchase new board?
Thank you SO much for your help. Your instructions are VERY clear. This is probably the most useful information anyone has ever given me. Thanks again.
Sanjeev
lala30 fuse sc49 in box C controls ebox relay correct?
i think for easy way we cant use xenon headlamps wiring wich was conected to pin3 and pin 4 ,reconect it to LED headlights pin 8,then disconect from range module t26a/17 or t26a/18 and connect it to fuse holder in box C sc49 with 7.5-10A fuse.no new relay and wiring be needed
i think for easy way we cant use xenon headlamps wiring wich was conected to pin3 and pin 4 ,reconect it to LED headlights pin 8,then disconect from range module t26a/17 or t26a/18 and connect it to fuse holder in box C sc49 with 7.5-10A fuse.no new relay and wiring be needed
Hi Lala,
I know this are silly questions. I'm sorry. I'm new to wiring terminology!
What is KL 87 and KL 15? Does this mean terminal 87 and terminal 15? How do you know that LED pin use terminal 87 and fuse sc49 use terminal 15? I can't see this information from wiring diagram.
[/URL][/IMG]
How can I identify letter T1 in the box?
Thank you for your patience and kind help!
Sanjeev
I know this are silly questions. I'm sorry. I'm new to wiring terminology!
What is KL 87 and KL 15? Does this mean terminal 87 and terminal 15? How do you know that LED pin use terminal 87 and fuse sc49 use terminal 15? I can't see this information from wiring diagram.
How can I identify letter T1 in the box?
Thank you for your patience and kind help!
Sanjeev
You may find this page helpful:
http://www.ross-tech.com/training/
Yes, 'KL' = 'Klemme' = German for 'Terminal'.
-Uwe-
one photo 1000 words
Yes, it does! Thanks.
Regarding connectors, are they like these and non-insulated? (Or do they need to be insulated?
I think they are good source for tracer wiring and terminals:
http://www.vehicle-wiring-products.eu/
Many thanks for your help as always!
Last edited:
[/URL][/IMG]
Lala,
I have a question for you. You are very familiar with parts.
Regarding the terminal connectors, do you know part numbers or where I can purchase them? I have all parts, except for connectors to connect fuses/relays to wire. (I already have the correct wire. I only need connector information.)
See this picture for detail: https://www.dropbox.com/s/dhdrw0l3nyasfbj/terminal connector.jpg?dl=0
Thanks for your help!
Sanjeev
Last edited:
So I am going to attempt this retrofit and I have a couple questions. As I understand this thread with just a rewire of the current pins on the 14-pin connector that plugs into the current XENON headlight you can get the following working:
LED Low-beam
LED Daytime Running Lights
LED Turn Signal Lights
LED Side-marker (USA)
In order to get the LED High-beam and Cornering lights to work you need to run new wires and relay from the engine bay B box, and new wires from the in-cabin C box, and replace the J431 control module (part number 5Q0-907-357-Z00) with the J745 control module (part number 7P6-907-357-C-Z00), and move 4 of the wires from the old control module to 2 pins on the new control module. Then you have to change the coding and adaptations on the new modules.
I plan on doing this in two stages. The re-wire first and the module change second. Will any warning lights come on in the dash when I turn the car on after just the first stage re-wire?
Will the T26A connector that is currently plugged into the Headlamp Range Control Module -J431- fit directly into the Headlamp Range/Cornering Lamp Control Module -J745- or do you have to get a new connector and re-wire it as well?
Thanks in advance for any help!
LED Low-beam
LED Daytime Running Lights
LED Turn Signal Lights
LED Side-marker (USA)
In order to get the LED High-beam and Cornering lights to work you need to run new wires and relay from the engine bay B box, and new wires from the in-cabin C box, and replace the J431 control module (part number 5Q0-907-357-Z00) with the J745 control module (part number 7P6-907-357-C-Z00), and move 4 of the wires from the old control module to 2 pins on the new control module. Then you have to change the coding and adaptations on the new modules.
I plan on doing this in two stages. The re-wire first and the module change second. Will any warning lights come on in the dash when I turn the car on after just the first stage re-wire?
Will the T26A connector that is currently plugged into the Headlamp Range Control Module -J431- fit directly into the Headlamp Range/Cornering Lamp Control Module -J745- or do you have to get a new connector and re-wire it as well?
Thanks in advance for any help!
hi,after rewiring you will have range control error in the dash,
after change headlamp range/cornering light unit you will need to rewire t26a connector
you can use old t26a connector
after change headlamp range/cornering light unit you will need to rewire t26a connector
you can use old t26a connector
hi there I am attempting to retrofit from halogen with 10 pin to led with 14pin
LED Pin 1 AFS unit Pin 4
LED Pin 2 AFS unit Pin 5
LED Pin 3 Not used
LED Pin 4 Not used
LED Pin 5 ground
LED Pin 6 low beam+
LED Pin 7 ground
LED Pin 8 B box - fuse 5A
LED Pin 9 C box - fuse 15A
LED Pin 10 ground
LED Pin 11 DRL+
LED Pin 12 DRL+
LED Pin 13 turn signal
LED Pin 14 not used
I have wired pins 5/6/7/10/11/12/13 from original 10 pin plug
and put tempory 12v feed to pins 4/5 (will wire to fuse box b/c later)
drl low beam and turn signal working ok
the problem I have is the car as far as I am aware dose not have a afs module to wire pins 1/2 in to
is there another way to wire pins 1/2 to get main beam or do I need to retro fit a afs module
thanks jox
LED Pin 1 AFS unit Pin 4
LED Pin 2 AFS unit Pin 5
LED Pin 3 Not used
LED Pin 4 Not used
LED Pin 5 ground
LED Pin 6 low beam+
LED Pin 7 ground
LED Pin 8 B box - fuse 5A
LED Pin 9 C box - fuse 15A
LED Pin 10 ground
LED Pin 11 DRL+
LED Pin 12 DRL+
LED Pin 13 turn signal
LED Pin 14 not used
I have wired pins 5/6/7/10/11/12/13 from original 10 pin plug
and put tempory 12v feed to pins 4/5 (will wire to fuse box b/c later)
drl low beam and turn signal working ok
the problem I have is the car as far as I am aware dose not have a afs module to wire pins 1/2 in to
is there another way to wire pins 1/2 to get main beam or do I need to retro fit a afs module
thanks jox