Installed RNS-510 and lost my Aux and reverse camera

Hanzzon · Mar 29, 2015

Help Needed :confused:

I have changed my RCD-510 to a RNS-510 but after the change i have lost my factory installed reverse camera and aux. Everything else is working perfect.

So have anyone any clue whats wrong? is it in the RNS? Software? Checked out the cabels connectors and that is ok so far that i can see.
It is a 2011 Vw Golf Tdi Variant Mk6 DSG7.

[/IMG]

Uwe · Mar 29, 2015

Please show us the whole car.

-Uwe-

roth · Mar 29, 2015

Hanzzon said:
Help Needed I have changed my RCD-510 to a RNS-510 but after the change i have lost my factory installed reverse camera and aux. Everything else is working perfect. So have anyone any clue whats wrong? is it in the RNS? Software? Checked out the cabels connectors and that is ok so far that i can see.

You might want to check coding in the Gateway and Navigation. Start with Navi. The reason is if the RNS 510 was coded to communicate with the camera over CAN bus before then it will not see it now since you got the camera connected directly to it.

BR, Andy

Hanzzon · Mar 30, 2015

[/IMG]

Hanzzon · Mar 30, 2015

[/IMG]

Hanzzon · Mar 30, 2015

[/IMG]

Hanzzon · Mar 30, 2015

[/IMG]

Hanzzon · Mar 30, 2015

[/IMG]

Hanzzon · Mar 30, 2015

[/IMG]

Hanzzon · Mar 30, 2015

Hope some of this Pictures can bring out something? What is your suggestion then Andy Roth? i am a newbie at this stuff... :banghead:

but what i can see from vcds there is no Connection with camera but it is installed in the car... are they somehow connected together Aux and camera? just a thought because either wont work... Really purciate any tips and help from you guys out there :thumbs:

Thank you

golfi_vend · Mar 30, 2015

Just do autoscan and post result here. Much easier and less data, for more information.

Hanzzon · Mar 30, 2015

First Picture is from autoscan :confused:

golfi_vend · Mar 30, 2015

https://www.youtube.com/watch?v=RCBt6d42-Fc

roth · Mar 30, 2015

Hanzzon said:
What is your suggestion then Andy Roth? i am a newbie at this stuff... but what i can see from vcds there is no Connection with camera but it is installed in the car... are they somehow connected together Aux and camera?

My suggestion would be to read post #2 again, a couple of times if needed.

BR, Andy

passatmotion · Mar 30, 2015

Have you added in the Installation List of the gateway? RVC and not for shore AUX (MDI in the list is something ells for that you need a module and can be use with I-phone or HDD)
Camera low-cam or high-cam?

low = without the moving lines
high = with moving lines

golfi_vend · Mar 30, 2015

passatmotion said:
Have you added in the Installation List of the gateway? RVC and not for shore AUX (MDI in the list is something ells for that you need a module and can be use with I-phone or HDD)
Camera low-cam or high-cam?

low = without the moving lines
high = with moving lines

I guess that the car doesn't have camera high because when you look at the installation list(yeah in Swedish), it tells us "kan ej nas"(Unreachable)

passatmotion · Mar 30, 2015

Look at address 19 and uncheck camera if that is on, that's for high-cam J772 https://youtu.be/TXBVnQA9HoA

AUX Input:
Address 37 and in long coding under Byte 00 select Bit 2

Camera (RVC)
The headunit requires programming to tell it of the existence of a RVC.
Address 37 and in long coding under Byte 03 select Bit 6.
To complete, reboot the RNS 510 with the three buttons on top. '<' , '>' and '* or a speaker button'

If it still saying unreachable inspect you fuses in the fusebox on the left or the plugs from radio/camera/AUX and etc.
Picture is an example of a low-camera and is without movable lines

Hanzzon · Mar 31, 2015

Hello Guys :thumbs:

Got the camera working thanx to your advice BUT still no AUX working??? did like PASSATMOTION said but it was already like he said ... Are there any fuse for aux? Where and what number if so ? Hope someone can help me solve that matter too :confused:

So grateful for the help im getting from you out there that nows about this kind of issues.

Hanzzon · Mar 31, 2015

Hello! This the fault code that comes up now???

[/IMG]

Hanzzon · Mar 31, 2015

Everything is now working THANK YOU ALL

You're the best

Installed RNS-510 and lost my Aux and reverse camera

Verified VCDS User

Benevolent Dictator

Verified VCDS User

Verified VCDS User

Verified VCDS User

Verified VCDS User

Verified VCDS User

Verified VCDS User

Verified VCDS User

Verified VCDS User

Verified VCDS User

Verified VCDS User

Verified VCDS User

Verified VCDS User

Verified VCDS User

Verified VCDS User

Verified VCDS User

Verified VCDS User

Verified VCDS User

Verified VCDS User