2016 MK7 GTI Clubsport/40 Years retrofitting MK7.5 Headlights (VLAND)

   #1  
P1xellat3d

P1xellat3d

Verified VCDS User
Verified
Joined
Jul 21, 2020
Messages
42
Reaction score
15
Location
Australia
VCDS Serial number
C?ID=384108
Hi all,

I have encountered some difficulty trying to get these headlights to work. I want to start off by saying that I went against all advice from the seller's disclaimer that these headlights do not work with cars with factory Xenons. However, in saying that, I have seen others make it work (through the use of a harness, and perhaps some coding) so I have high hopes it will also work for me :)

Some details

Vehicle: VW Golf GTI MK7 Clubsport/40 Years
Region: Australia

What originally came with the car:

nCICN03.png


The goal

The goal here is for me to be able to successfully retrofit the below headlights into my vehicle. Below is a pic and a link to the headlights, as well as the harness that I purchased:

Headlights: https://www.vland-carlamp.com/Headlights_For_2013-2018_Volkswagen_VW_Golf_7/p4995994_20265061.aspx

VgPUbf1.jpg


Harness: https://www.aliexpress.com/item/4000849328042.html

Ec0O3Zz.jpg


The problem

Every other function (indicators, DRLs, low-beam) work completely fine.

The only problem I am facing is that the high beams (which are the inner projector lens) do not light up at all. I have tried several bulbs and that does not seem to be the issue.

The issue is potentially due to coding. from reading up on similar forum posts, the issue is due to the original headlights having a 'shutter' high-beam function (meaning there is a shared low/high beam projector, and the high beam is activated by opening the shutter on the low-beam)

The recommendations I have seen so far is to change the "Lasstyp" of Leuchte8FL RB39 and Leucht9FL RB2 to something different. Unfortunately, there are a lot of options and I am lost as to which one to try.

Solution?

I appreciate that I may have left out some potentially important details for a proper diagnosis; If there are any additional details I can include, please let me know and I will include it in the post.

Otherwise, I would appreciate if someone could point me in the right direction to get this working!

Thanks everyone in advance :)
 
   #2  
DV52

DV52

Verified VCDS User
Verified
Joined
May 16, 2014
Messages
5,469
Reaction score
5,935
Location
Melbourne, Australia
VCDS Serial number
C?ID=194404
^^^ G'day cobber!!! hmm...... please post-up a copy of an autoscan so we can all see what equipment is installed in your car (and more importantly, so we can see how well the car has tolerated the retrofitted components).

As for the "the problem" and purely IMO based entirely on your explanation, I doubt that experimenting with Leuchte8FL RB39, or Leucht9FL RB29FL will be useful. My concern regarding this approach stems from the fact that these 2 x Leuchte-sets are traditionally assigned to the main-beam lamps on incandescent headlight assemblies. Since your car was factory fitted with HIDs, I very much doubt that the the pins on the BCM for these 2 x Leuchte-sets (i.e. pin #29, socket B and pin #39, socket B) will be terminated with wires.

Instead, it's more likely that the main-beam function on your car will be controlled by Leuchte10SHUTTER LB23 (left-side) and Leuchte11SHUTTER RB22 (right-side).

Now as to the "solution", second guessing the supply needs of third-party, after-market headlight fittings is very hit-and-miss because the internal design can vary greatly. Also, without an auto-scan it's unclear if your car has a hex55 module and if so, how it feels after the adapter was installed (which would have disconnected the headlights from the module - I assume). Finally, there's the matter of the supplier's advice regarding the courageous nature of fitting this equipment to a HID car (as you say). So, lots of unknowns!!

Nevertheless, if you want to start with the "low-hanging fruit", you might consider a pure coding try first like this: since the adapter that you used was 14 x pin (car-end) to 10 x pin (headlight- end), the new fittings clearly expected to see a 10 x pin connector in the car loom . As said previously, this means that the new headlight fittings were designed with halogen fittings in mind and this is confirmed by the seller's advice.

Based on this line of conclusions, perhaps try setting-up the "Shutter" Leuchte-sets in the same way as halogen main-beam lights. I'm guessing of course and I'm not even sure that these function specific Leuchte-sets are able to operate in this mode. But if you want to proceed, try this:

ENG116947-ENG116081-Leuchte11SHUTTER RB22-Lasttyp 11 > 10 - allgemeine Scheinwerfer (2 - Shutter: Diagnosesensierung für 'LED low')
ENG116947-ENG116086-Leuchte11SHUTTER RB22-Dimmwert AB 11 > 100 (127)

ENG116946-ENG116062-Leuchte10SHUTTER LB23-Lasttyp 10 > 10 - allgemeine Scheinwerfer (2 - Shutter: Diagnosesensierung für 'LED low')
ENG116946-ENG116067-Leuchte10SHUTTER LB23-Dimmwert AB 10 > 100 (127)

note: the bracketed values should be your current settings - don't proceed if these values are not as shown

Please also note that my suggestion is just a guess and yours is a unique (read novel) situation

Don
 
Last edited:
   #3  
P1xellat3d

P1xellat3d

Verified VCDS User
Verified
Joined
Jul 21, 2020
Messages
42
Reaction score
15
Location
Australia
VCDS Serial number
C?ID=384108
Hi DV52,

Many thanks for the detailed write-up and suggestions. I will try these two adaptations tomorrow when I have the headlights plugged in. At this stage I am still just test-fitting (after all, there's no point ripping everything out if I can't get the high-beams to work!).

Below is an auto-scan as requested (again noting the Bi-xenons are still installed so you may not see any info on the retrofit headlights). I will post up another auto-scan tomorrow with the retrofit headlights plugged in.

Code: 
Monday,10,August,2020,20:36:38:59968
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 20.4.1.0 (x64)  HEX-NET CB: 0.4513.4
Data version: 20200331 DS317.0
www.Ross-Tech.com


VIN: WVWZZZAUZGW301104   License Plate: DZM40E
Mileage: 62954km-39117mi   Repair Order: 



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Chassis Type: AU-VW37 (5Q0)
Scan: 01 02 03 05 08 09 10 13 14 15 16 17 19 2B 32 3C 42 44 52 55
          5F A9

VIN: WVWZZZAUZGW301104   Mileage: 62954km-39117miles

01-Engine -- Status: OK 0000
02-Auto Trans -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
05-Acc/Start Auth. -- Status: Malfunction 0010
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: Malfunction 0010
10-Park/Steer Assist -- Status: OK 0000
13-Auto Dist. Reg -- Status: OK 0000
14-Susp. Elect. -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: Malfunction 0010
2B-Steer. Col. Lock -- Status: OK 0000
32-Differential Locks -- Status: OK 0000
3C-Lane Change -- Status: OK 0000
42-Door Elect, Driver -- Status: Malfunction 0010
44-Steering Assist -- Status: OK 0000
52-Door Elect, Pass. -- Status: Malfunction 0010
55-Headlight Range -- Status: Malfunction 0010
5F-Information Electr. -- Status: Malfunction 0010
A9-Struct. Borne Sound -- Status: OK 0000
-------------------------------------------------------------------------------
Address 01: Engine (J623-CJXE)       Labels:. 06K-907-425-V1.clb
   Part No SW: 5G0 906 259 K    HW: 06K 907 425 B
   Component: 2.0l R4 TFSI  H13 0001  
   Revision: --H13---    
   Coding: 091D00122464050B3000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_ECM20TFS0205G0906259K 001002
   ROD: EV_ECM20TFS0205G0906259K.rod
   VCID: B620BF4109ADBD3661-80E2

No fault code found.
Readiness: 0000 0000

-------------------------------------------------------------------------------
Address 02: Auto Trans (J743)       Labels: 0D9-927-770.clb
   Part No SW: 0D9 300 020 K    HW: 02E 927 770 AQ
   Component: DQ250-6V MQB  H53 4933  
   Revision: 06253104    Serial number: TFK01601290863
   Coding: 0014
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_TCMDQ250021 001001
   ROD: EV_TCMDQ250021.rod
   VCID: 9D7240ED8C5B0E6E80-80C8

2 Faults Found:
10657 - RPM Signal from ECU 
          P0726 00 [002] - Implausible Signal
          Intermittent - Not Confirmed - Tested Since Memory Clear

10763 - Starter Enable from Selector Lever Sensor System 
          P1734 00 [002] - -
          Intermittent - Not Confirmed - Tested Since Memory Clear


-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104)       Labels: 5Q0-907-379-IPB-V1.clb
   Part No SW: 3Q0 907 379 AB    HW: 3Q0 907 379 G
   Component: ESC           H42 0723  
   Revision: 00000000    Serial number: 60946000000347
   Coding: 01FA93A15420296D0778060041C76980C92A94E0608296F7184250B9C288
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_Brake1UDSContiMK100IPB 034036
   ROD: EV_Brake1UDSContiMK100IPB_034.rod
   VCID: FAB86B717D359956C5-80AE

No fault code found.

-------------------------------------------------------------------------------
Address 05: Acc/Start Auth. (J518)       Labels:| 5Q0-959-435.clb
   Part No SW: 5Q0 959 435 A    HW: 5Q0 959 435 
   Component: VWKESSYMQB    021 0604  
   Revision: 00021000    Serial number: 0400065246
   Coding: 0F0C0C
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_KessyHellaMQBAB 002011
   ROD: EV_KessyHellaMQBAB_002.rod
   VCID: BA38AB713DB5595685-80EE

5 Faults Found:
1052945 - Touch Sensor on Exterior Door Grip; Driver Side 
          B116B F0 [009] - Short Between Poles
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 4
                    Fault Frequency: 52
                    Reset counter: 168
                    Mileage: 62346 km
                    Date: 2020.07.28
                    Time: 14:31:58

1054214 - Touch Sensor on Exterior Door Grip; Rear Left 
          B116D 12 [008] - Short to Plus
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 4
                    Fault Frequency: 21
                    Reset counter: 211
                    Mileage: 62346 km
                    Date: 2020.07.28
                    Time: 14:31:58

1054225 - Touch Sensor on Exterior Door Grip; Rear Left 
          B116D F0 [009] - Short Between Poles
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 4
                    Fault Frequency: 41
                    Reset counter: 168
                    Mileage: 62349 km
                    Date: 2020.07.28
                    Time: 14:45:59

1054470 - Touch Sensor on Exterior Door Grip; Rear Right 
          B116E 12 [008] - Short to Plus
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 4
                    Fault Frequency: 6
                    Reset counter: 211
                    Mileage: 62420 km
                    Date: 2020.07.28
                    Time: 23:20:56

1054481 - Touch Sensor on Exterior Door Grip; Rear Right 
          B116E F0 [009] - Short Between Poles
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 4
                    Fault Frequency: 49
                    Reset counter: 168
                    Mileage: 62346 km
                    Date: 2020.07.28
                    Time: 14:31:58


-------------------------------------------------------------------------------
Address 08: Auto HVAC (J255)       Labels:| 5G0-907-044.clb
   Part No SW: 5G0 907 044 BC    HW: 5G0 907 044 BC
   Component: Climatronic   H03 1001  
   Revision: 00001K08    
   Coding: 00120004200100001005004012101402
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_ACClimaBHBVW37X 004131
   ROD: EV_ACClimaBHBVW37X_004_VW37.rod
   VCID: E99A243D089322CE3C-80BC

   Fresh Air Blower Front: 

   Geber für Kältemitteldruck/Kältemitteltemperatur: 

   Air quality sensor: 

No fault code found.

-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519)       Labels:| 5Q0-937-08X-HV1.clb
   Part No SW: 5Q0 937 084 CL    HW: 5Q0 937 084 AN
   Component: BCM MQBAB H   H24 0175  
   Serial number: 01061608900099
   Coding: 03011A42C24122F30BA44080B10C07281800000000000000000000000000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_BCMMQB 015001
   ROD: EV_BCMBOSCH_015.rod
   VCID: 844415890FF1DFA6AF-80D0

   Control Unit For Wiper Motor: 
   Subsystem 1 - Part No SW: 5G2 955 119 A    HW: 5G2 955 119 A  Labels: 5QX-955-119-V1.CLB
   Component: WWS    160319  042 0551 
   Serial number:         160331163728
   Coding: 0E4DDD

   Rain Light Recognition Sensor: 
   Subsystem 2 - Part No SW: 5Q0 955 547 A    HW: 5Q0 955 547 A  Labels: 5Q0-955-547.CLB
   Component: RLHS  037 0059 
   Serial number: S5Y16M04D08H12M39S10
   Coding: 06A8DD

   Sensor For Anti Theft Alarm System: 
   Subsystem 3 - Part No SW: 5Q0 951 172     HW: 5Q0 951 172 
   Component: Sensor, DWA  005 0316 
   Serial number: 000000000ZY1603908L8

   Alarm horn: 
   Subsystem 4 - Part No SW: 5Q0 951 605 A    HW: 5Q0 951 605 A
   Component: Sirene, DWA  005 0313 
   Serial number: 00000000000065496712

9 Faults Found:
6922 - Bulb for Low Beam Headlamp Right 
          B1218 15 [008] - Open or Short to Plus
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 1
                    Fault Frequency: 3
                    Reset counter: 206
                    Mileage: 62539 km
                    Date: 2020.08.01
                    Time: 18:54:44

7943 - Reflector Actuator for Right Low Beam Headlamp 
          B121C 11 [008] - Short to Ground
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 3
                    Fault Frequency: 1
                    Reset counter: 209
                    Mileage: 62539 km
                    Date: 2020.08.01
                    Time: 18:59:43

12554 - Bulb for Left Back-up Light 
          B12CB 15 [008] - Open or Short to Plus
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 193
                    Mileage: 62574 km
                    Date: 2020.08.01
                    Time: 23:40:30

16650 - Bulb 2 for Rear Left Turn Signal 
          B12CE 15 [009] - Open or Short to Plus
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 143
                    Mileage: 62338 km
                    Date: 2020.07.28
                    Time: 14:16:42

16906 - Bulb 2 for Rear Right Turn Signal 
          B12CF 15 [009] - Open or Short to Plus
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 144
                    Mileage: 62338 km
                    Date: 2020.07.28
                    Time: 14:18:23

18954 - Left LED Module for DRL and Parking Lights 
          B12EC F5 [008] - Control Circuit Open or Short to Plus
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 194
                    Mileage: 62541 km
                    Date: 2020.08.01
                    Time: 20:44:21

19466 - Right LED Module for DRL and Parking Lights 
          B12ED F5 [008] - Control Circuit Open or Short to Plus
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 2
                    Reset counter: 194
                    Mileage: 62541 km
                    Date: 2020.08.01
                    Time: 20:44:47

526359 - Control Module Incorrectly Coded 
          U1014 00 [009] - -
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 152
                    Mileage: 62539 km
                    Date: 2020.08.01
                    Time: 19:07:46

526615 - Control Module Incorrectly Coded 
          U1014 00 [008] - -
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 2
                    Reset counter: 209
                    Mileage: 62541 km
                    Date: 2020.08.01
                    Time: 20:44:21


-------------------------------------------------------------------------------
Address 10: Park/Steer Assist (J446)       Labels:| 5Q0-919-283.clb
   Part No SW: 5Q0 919 283 G    HW: 5Q0 919 283 
   Component: PARKHILFE 4K  H10 0056  
   Revision: --------    Serial number: 39291609503352
   Coding: 0001154011
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_EPHVA14AU3700000 002024
   ROD: EV_EPHVA14AU3700000_002_VW37.rod
   VCID: BD32A06D2C9B6E6EA0-80E8

No fault code found.

-------------------------------------------------------------------------------
Address 13: Auto Dist. Reg (J428)       Labels:| 5Q0-907-572-V1.clb
   Part No SW: 5Q0 907 572 F    HW: 5Q0 907 572 F
   Component: ACC Bosch MQB H05 0400  
   Serial number: 27021603210675
   Coding: 001C1300FE0739
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_ACCMRRBoschVW372 001016
   ROD: EV_ACCMRRBoschVW372_VW26.rod
   VCID: BA38AB713DB5595685-80EE

No fault code found.

-------------------------------------------------------------------------------
Address 14: Susp. Elect. (J250)       Labels: 5Q0-907-376.clb
   Part No SW: 5Q0 907 376 A    HW: 5Q0 907 376 A
   Component: DAEMPFUNGS-SG H17 0120  
   Serial number: 10031641350510
   ASAM Dataset: EV_DRCONTITEMIC 001019
   ROD: EV_DRCONTITEMIC_VW37.rod
   VCID: B73EB2450EA7443E7A-80E2

No fault code found.

-------------------------------------------------------------------------------
Address 15: Airbags (J234)       Labels:| 5Q0-959-655.clb
   Part No SW: 5Q0 959 655 D    HW: 5Q0 959 655 D
   Component: AirbagVW20    015 0388  
   Serial number: 003F6R1LFRVH
   Coding: 98CCC000000000005C00000000C800000065
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_AirbaVW20SMEVW37X 002130
   ROD: EV_AirbaVW20SMEVW37X_VW37.rod
   VCID: C1CADC9D50630A8EC4-8094

   Side Sensor Driver Front: 
   Subsystem 1 - Part No SW: -----------    HW: 480 000 704 16
   Component: SideSensor_Df  001 0887 
   Serial number: 3576700000022AB46A1V
   Coding: 2D2D2D

   Side Sensor Passenger Front: 
   Subsystem 2 - Part No SW: -----------    HW: 480 000 704 16
   Component: SideSensor_Pf  001 0887 
   Serial number: 3586700000025DF85A12
   Coding: 2D2D2D

   Side Sensor Driver Rear: 
   Subsystem 3 - Part No SW: -----------    HW: 480 402 903 16
   Component: SideSensor_Dr  001 6149 
   Serial number: 3516502C920414E562FA
   Coding: 2D2D2D

   Side Sensor Passenger Rear: 
   Subsystem 4 - Part No SW: -----------    HW: 480 400 604 16
   Component: SideSensor_Pr  001 6149 
   Serial number: 3526502AB20414E1A23%
   Coding: 2D2D2D

   Front Sensor Driver: 
   Subsystem 5 - Part No SW: -----------    HW: 480 402 903 16
   Component: FrontSensor_D  001 6149 
   Serial number: 3556502B720414F4307+
   Coding: 2D2D2D

No fault code found.

-------------------------------------------------------------------------------
Address 16: Steering wheel (J527)       Labels:| 5Q0-953-549.clb
   Part No SW: 5Q0 953 507 HL    HW: 5Q0 953 549 E
   Component: Lenks. Modul  003 0120  
   Revision: --------    Serial number: 01041604221316
   Coding: 0410
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_SMLSKLOMQB 020001
   ROD: EV_SMLSKLOMQB_020_VW37.rod
   VCID: 875E02853EC7F4BECA-80D2

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments (J285)       Labels:| 5G0-920-XXX-17.clb-SRI3
   Part No SW: 5G0 920 756     HW: 5G0 920 756 
   Component: KOMBI         302 6420  
   Coding: 27AD09183F880008018A7A095400000000000000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_DashBoardVDDMQBAB 009046
   ROD: EV_DashBoardVDDMQBAB_009_VW37.rod
   VCID: E99A243D089322CE3C-80BC

No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533)       Labels:| 5Q0-907-530-V1.clb
   Part No SW: 5Q0 907 530 AJ    HW: 5Q0 907 530 F
   Component: GW MQB High   128 1244  
   Revision: --------    Serial number: 0004684953
   Coding: 030100043F085900FB00027B9C0F00010001050000000000000000000000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_GatewLear 013020
   ROD: EV_GatewLear_013.rod
   VCID: F9BA747D7833924ECC-80AC

   Alternator: 

   Multi Function Steering Wheel Control Module: 
   Subsystem 2 - Part No SW: 5G0 959 442 N    HW: 5G0 959 442 N  Labels: 3C8-959-537.CLB
   Component: E221__MFL-DC1  H11 0040 
   Serial number: 29160000651990066127
   Coding: 2DFFFF

   Battery Monitoring Control Module: 
   Subsystem 3 - Part No SW: 5Q0 915 181 G    HW: 5Q0 915 181 G
   Component: J367-BDMHella  H04 8050 
   Serial number: 1361649703          

2 Faults Found:
66052 - Infotainment CAN Bus (SAE Bus E) 
          U0065 00 [008] - Performance
          [Globaler Timeout CAN-Infotainment]
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 3
                    Reset counter: 211
                    Mileage: 62530 km
                    Date: 2020.08.01
                    Time: 14:45:54

                    Supply voltage: Terminal 30: 12.4 V
                    Terminal 15: OFF

8531970 - Quiescent Current 
          U1406 00 [008] - Too High
          [Ruhestrom oberer Grenzwert überschritten]
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 7
                    Fault Frequency: 19
                    Reset counter: 210
                    Mileage: 62425 km
                    Date: 2020.07.28
                    Time: 23:36:17

                    Supply voltage: Terminal 30: 12.4 V
                    Terminal 15: OFF


-------------------------------------------------------------------------------
Address 2B: Steer. Col. Lock (J764)       Labels:* 5Q0-905-861.clb
   Part No SW: 5Q0 905 861 A    HW: 5Q0 905 861 A
   Component: ELV-MQBA      H01 0120  
   Revision: 00000000    Serial number: 16000059603007
   Coding: 5D00000000000000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_ELVMarquMQB 004111
   ROD: EV_ELVMarquMQB.rod
   VCID: B42485491FD1AF265F-80E0

No fault code found.

-------------------------------------------------------------------------------
Address 32: Differential Locks (J492)       Labels:* 0CQ-907-554.clb
   Part No SW: 0CQ 907 554 E    HW: 0CQ 907 554 E
   Component: Quersperre    H52 8042  
   Serial number: HA1-00011.11.15
   Coding: 0001
   Shop #: WSC 00000 000 00000
   ASAM Dataset: EV_LockElectHA1VW37X 001007
   ROD: EV_LockElectHA1VW37X.rod
   VCID: C7DEC2857E4734BE0A-8092

No fault code found.

-------------------------------------------------------------------------------
Address 3C: Lane Change (J1086)       Labels:| 5Q0-907-686.clb
   Part No SW: 5Q0 907 686 B    HW: 5Q0 907 686 B
   Component: HRE_Master    H12 0071  
   Serial number: 0399230744
   Coding: 02011203
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_HREntryHella 001028
   ROD: EV_HREntryHella_VW37.rod
   VCID: BC34AD693781676697-80E8

   Lane Change Assistant 2: 
   Subsystem 1 - Part No SW: 5Q0 907 685 B    HW: 5Q0 907 685 B
   Component: HRE_Slave  H12 0071 
   Serial number: 0399256121          
   Coding: 020112

No fault code found.

-------------------------------------------------------------------------------
Address 42: Door Elect, Driver (J386)       Labels:| 5QX-959-X93-42.clb
   Part No SW: 5Q4 959 593 E    HW: 5Q4 959 593 B
   Component: TSG FS        010 0031  
   Serial number: 0000166057989 
   Coding: 00151220D001040000001000
   Shop #: WSC 00028 028 00066
   ASAM Dataset: EV_DCUDriveSideEWMAXCONT 006001
   ROD: EV_DCUDriveSideEWMAXCONT.rod
   VCID: C7DEC2857E4734BE0A-8092

   Drivers Door Rear Control Module: 
   Subsystem 1 - Part No SW: 5Q0 959 812     HW: 5Q0 959 812   Labels: 5QX-959-81X-V1.CLB
   Component: FOND_FHSG_DRV  005 0005 
   Serial number: 00000000000009633870
   Coding: 0D0000

1 Fault Found:
65588 - Motor for Window Regulator 
          B1487 54 [008] - Missing Calibration / Basic Setting
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 3
                    Fault Frequency: 1
                    Reset counter: 183
                    Mileage: 62338 km
                    Date: 2020.07.28
                    Time: 14:01:37


-------------------------------------------------------------------------------
Address 44: Steering Assist (J500)       Labels:| 5Q0-909-144.clb
   Part No SW: 3Q0 909 144 J    HW: 3Q0 909 144 H
   Component: EPS_MQB_ZFLS  505 5063  
   Coding: 8103
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_SteerAssisMQB 012140
   ROD: EV_SteerAssisMQB_012_VW37.rod
   VCID: B93AB47D38B3524E8C-80EC

No fault code found.

-------------------------------------------------------------------------------
Address 52: Door Elect, Pass. (J387)       Labels:| 5QX-959-X92-52.clb
   Part No SW: 5Q0 959 592 E    HW: 5Q0 959 592 B
   Component: TSG BFS       020 0041  
   Serial number: 270316ECQ29861
   Coding: 001D1020DE01040000801000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_DCUPasseSideEWMAXKLO 006003
   ROD: EV_DCUPasseSideEWMAXCONT.rod
   VCID: C2C8D39155651196DD-8096

   Passengers Rear Door Control Module: 
   Subsystem 1 - Part No SW: 5Q0 959 811     HW: 5Q0 959 811   Labels: 5QX-959-81X-V1.CLB
   Component: FOND_FHSG_PSG  005 0005 
   Serial number: 00000000000009502039
   Coding: 150000

1 Fault Found:
65608 - Lamp for Ambient Speaker Illumination 
          B13C8 01 [008] - Electrical Failure
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 3
                    Fault Frequency: 1
                    Reset counter: 197
                    Date: 2000.00.00
                    Time: 00:00:00


-------------------------------------------------------------------------------
Address 55: Headlight Range (J745)       Labels:| 7P6-907-357.clb
   Part No SW: 7P6 907 357 D    HW: 7P6 907 357 A
   Component: AFS-ECU       H07 0090  
   Revision: --------    Serial number: --------------
   Coding: 029603000B000200
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_HeadlRegulVWAFSMQB 001120
   ROD: EV_HeadlRegulVWAFSMQB.rod
   VCID: C0CCD9995B690386CB-8094

   Left Headlamp Power Output Stage: 
   Subsystem 1 - Part No SW: 3D0 941 329 E    HW: 3D0 941 329 E  Labels: 3D0-941-329.CLB
   Component: LeiMo links  H01 0002 
   Coding: 2E0000

   Right Headlamp Power Output Stage: 
   Subsystem 2 - Part No SW: 3D0 941 329 E    HW: 3D0 941 329 E  Labels: 3D0-941-329.CLB
   Component: LeiMo rechts  H01 0002 
   Coding: 2E0000

3 Faults Found:
5276400 - Power Output Module for Right Headlamp 
          C1082 F0 [008] - Not Coded
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 3
                    Reset counter: 206

5276209 - Power Output Module for Right Headlamp 
          C1082 31 [008] - No Signal
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 6
                    Reset counter: 206
                    Mileage: 62539 km
                    Date: 2020.08.01
                    Time: 18:54:43

9574400 - Bulb for Low Beam Headlamp Right 
          B1218 00 [008] - -
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 2
                    Reset counter: 206
                    Mileage: 62539 km
                    Date: 2020.08.01
                    Time: 18:54:47


-------------------------------------------------------------------------------
Address 5F: Information Electr. (J794)       Labels:| 5G0-035-MIB-STD2.clb
   Part No SW: 3Q0 035 846     HW: 3Q0 035 846 
   Component: MU-S-N-ER     820 0624  
   Serial number:               
   Coding: 02730008FF00000051510004000828001F0203D601200100C7
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_MUStd4CDELP 001001
   ROD: EV_MUStd4CDELP_VW37.rod
   VCID: EE905721317DC5F669-80BA

   Operating And Display Unit 1: 
   Subsystem 1 - Part No SW: 3G0 919 605 D    HW: 3G0 919 605 D
   Component: ABT_Std-2_Nav  H43 4064 
   Serial number: VWZ6Z9S1010287      

   Data medium: 
   Subsystem 2 - Part No SW: 5NA 919 866 AD    HW: -----------
   Component: MRM3 2020  --- 1310 
   Serial number: --------------------

1 Fault Found:
1543 - Control Module Incorrectly Coded 
          U1014 00 [009] - -
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 4
                    Fault Frequency: 1
                    Reset counter: 143
                    Mileage: 62338 km
                    Date: 2020.07.28
                    Time: 14:01:37

                    Voltage terminal 30: 11.4 V
                    Byte_Coding_Condition-byte_0_condition: OK
                    Byte_Coding_Condition-byte_1_condition: OK
                    Byte_Coding_Condition-byte_10_condition: ERROR
                    Byte_Coding_Condition-byte_11_condition: ERROR
                    Byte_Coding_Condition-byte_12_condition: ERROR
                    Byte_Coding_Condition-byte_13_condition: ERROR
                    Byte_Coding_Condition-byte_14_condition: ERROR
                    Byte_Coding_Condition-byte_15_condition: ERROR
                    Byte_Coding_Condition-byte_16_condition: ERROR
                    Byte_Coding_Condition-byte_17_condition: ERROR
                    Byte_Coding_Condition-byte_18_condition: ERROR
                    Byte_Coding_Condition-byte_19_condition: ERROR
                    Byte_Coding_Condition-byte_2_condition: OK
                    Byte_Coding_Condition-byte_20_condition: ERROR
                    Byte_Coding_Condition-byte_21_condition: ERROR
                    Byte_Coding_Condition-byte_22_condition: ERROR
                    Byte_Coding_Condition-byte_23_condition: ERROR
                    Byte_Coding_Condition-byte_24_condition: ERROR
                    Byte_Coding_Condition-byte_25_condition: ERROR
                    Byte_Coding_Condition-byte_26_condition: ERROR
                    Byte_Coding_Condition-byte_27_condition: ERROR
                    Byte_Coding_Condition-byte_3_condition: OK
                    Byte_Coding_Condition-byte_4_condition: OK
                    Byte_Coding_Condition-byte_5_condition: OK
                    Byte_Coding_Condition-byte_6_condition: OK
                    Byte_Coding_Condition-byte_7_condition: OK
                    Byte_Coding_Condition-byte_8_condition: OK
                    Byte_Coding_Condition-byte_9_condition: OK


-------------------------------------------------------------------------------
Address A9: Struct. Borne Sound (J869)       Labels: 4H0-907-159.clb
   Part No SW: 5G0 907 159 E    HW: 4H0 907 159 A
   Component: SAS-GEN 2     H07 0002  
   Serial number: 160302201802
   ASAM Dataset: EV_SoundActuaGen2AU64X 003010
   ROD: EV_SoundActuaGen2AU64X.rod
   VCID: B02C8959EBC993063B-80E4

No fault code found.

End----------(Elapsed Time: 02:06, VBatt start/end: 14.3V/14.4V)-----------

If there is anything glaring in the scan (I can see quite a few fault codes) please also let me know :)

Cheers,
 
   #4  
P1xellat3d

P1xellat3d

Verified VCDS User
Verified
Joined
Jul 21, 2020
Messages
42
Reaction score
15
Location
Australia
VCDS Serial number
C?ID=384108
Hi Don,

After playing around with the settings you suggested, I have some even more bizarre findings to share.

It seems that the high beam do in fact light up (but only for about 3/4 of a second) then they would turn off. I guess I previously couldn't notice it from outside the housing due to how short the flash actually is.

Anyway, I tried a variety of things (including LED bulbs, H7 halogens, and even a HID with ballast), all producing similar results.

Here is what an LED bulb looks like when I try to activate high beam (the light comes on when the stalk is pulled):


Here is the same LED bulb but polarities reversed in the plug (the light comes on when I release the stalk):


And here is the same but with a HID + ballast (only one of the polarities work, flipping it causes the HID to not illuminate at all):


I didn't get a video of it with a H7 halogen but I think you get the idea.

What I also noticed was when I disconnected the inner bulb entirely, the outer projector reveals that it actually has a "shutter" type function, and raises the low-beam shutter (just like in the original bi-xenon headlights). This means that technically I now have a high beam (at the sacrifice of the entire inner projector) :confused:

This seems to be the same behavior that was observed in the previous forum thread which you responded to here.

I have also experimented with the Lichtfunktion for A and B and it seems anything other than Lichthupe generell would cause it to not light up at all (although I haven't tested every single option in the list).

For reference, here is also an auto-scan with the right retrofit headlight plugged in:

Code: 
Monday,10,August,2020,23:38:25:59968
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 20.4.1.0 (x64)  HEX-NET CB: 0.4513.4
Data version: 20200331 DS317.0
www.Ross-Tech.com


VIN: WVWZZZAUZGW301104   License Plate: 
Mileage: 62954km-39117mi   Repair Order: 



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Chassis Type: AU-VW37 (5Q0)
Scan: 01 02 03 05 08 09 10 13 14 15 16 17 19 2B 32 3C 42 44 52 55
          5F A9

VIN: WVWZZZAUZGW301104   Mileage: 62954km-39117miles

01-Engine -- Status: OK 0000
02-Auto Trans -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
05-Acc/Start Auth. -- Status: Malfunction 0010
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: Malfunction 0010
10-Park/Steer Assist -- Status: OK 0000
13-Auto Dist. Reg -- Status: OK 0000
14-Susp. Elect. -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: Malfunction 0010
2B-Steer. Col. Lock -- Status: OK 0000
32-Differential Locks -- Status: OK 0000
3C-Lane Change -- Status: OK 0000
42-Door Elect, Driver -- Status: Malfunction 0010
44-Steering Assist -- Status: OK 0000
52-Door Elect, Pass. -- Status: Malfunction 0010
55-Headlight Range -- Status: Malfunction 0010
5F-Information Electr. -- Status: Malfunction 0010
A9-Struct. Borne Sound -- Status: OK 0000
-------------------------------------------------------------------------------
Address 01: Engine (J623-CJXE)       Labels:. 06K-907-425-V1.clb
   Part No SW: 5G0 906 259 K    HW: 06K 907 425 B
   Component: 2.0l R4 TFSI  H13 0001  
   Revision: --H13---    
   Coding: 091D00122464050B3000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_ECM20TFS0205G0906259K 001002
   ROD: EV_ECM20TFS0205G0906259K.rod
   VCID: B620BF4109ADBD3661-80E2

No fault code found.
Readiness: 0000 0000

-------------------------------------------------------------------------------
Address 02: Auto Trans (J743)       Labels: 0D9-927-770.clb
   Part No SW: 0D9 300 020 K    HW: 02E 927 770 AQ
   Component: DQ250-6V MQB  H53 4933  
   Revision: 06253104    Serial number: TFK01601290863
   Coding: 0014
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_TCMDQ250021 001001
   ROD: EV_TCMDQ250021.rod
   VCID: 9D7240ED8C5B0E6E80-80C8

No fault code found.

-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104)       Labels: 5Q0-907-379-IPB-V1.clb
   Part No SW: 3Q0 907 379 AB    HW: 3Q0 907 379 G
   Component: ESC           H42 0723  
   Revision: 00000000    Serial number: 60946000000347
   Coding: 01FA93A15420296D0778060041C76980C92A94E0608296F718  4250B9C288
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_Brake1UDSContiMK100IPB 034036
   ROD: EV_Brake1UDSContiMK100IPB_034.rod
   VCID: FAB86B717D359956C5-80AE

No fault code found.

-------------------------------------------------------------------------------
Address 05: Acc/Start Auth. (J518)       Labels:| 5Q0-959-435.clb
   Part No SW: 5Q0 959 435 A    HW: 5Q0 959 435 
   Component: VWKESSYMQB    021 0604  
   Revision: 00021000    Serial number: 0400065246
   Coding: 0F0C0C
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_KessyHellaMQBAB 002011
   ROD: EV_KessyHellaMQBAB_002.rod
   VCID: BA38AB713DB5595685-80EE

5 Faults Found:
1052945 - Touch Sensor on Exterior Door Grip; Driver Side 
          B116B F0 [009] - Short Between Poles
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 4
                    Fault Frequency: 54
                    Reset counter: 173
                    Mileage: 62346 km
                    Date: 2020.07.28
                    Time: 14:31:58

1054214 - Touch Sensor on Exterior Door Grip; Rear Left 
          B116D 12 [008] - Short to Plus
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 4
                    Fault Frequency: 22
                    Reset counter: 213
                    Mileage: 62346 km
                    Date: 2020.07.28
                    Time: 14:31:58

1054225 - Touch Sensor on Exterior Door Grip; Rear Left 
          B116D F0 [009] - Short Between Poles
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 4
                    Fault Frequency: 43
                    Reset counter: 173
                    Mileage: 62349 km
                    Date: 2020.07.28
                    Time: 14:45:59

1054470 - Touch Sensor on Exterior Door Grip; Rear Right 
          B116E 12 [008] - Short to Plus
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 4
                    Fault Frequency: 7
                    Reset counter: 213
                    Mileage: 62420 km
                    Date: 2020.07.28
                    Time: 23:20:56

1054481 - Touch Sensor on Exterior Door Grip; Rear Right 
          B116E F0 [009] - Short Between Poles
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 4
                    Fault Frequency: 51
                    Reset counter: 173
                    Mileage: 62346 km
                    Date: 2020.07.28
                    Time: 14:31:58


-------------------------------------------------------------------------------
Address 08: Auto HVAC (J255)       Labels:| 5G0-907-044.clb
   Part No SW: 5G0 907 044 BC    HW: 5G0 907 044 BC
   Component: Climatronic   H03 1001  
   Revision: 00001K08    
   Coding: 00120004200100001005004012101402
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_ACClimaBHBVW37X 004131
   ROD: EV_ACClimaBHBVW37X_004_VW37.rod
   VCID: E99A243D089322CE3C-80BC

   Fresh Air Blower Front: 

   Geber für Kältemitteldruck/Kältemitteltemperatur: 

   Air quality sensor: 

No fault code found.

-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519)       Labels:| 5Q0-937-08X-HV1.clb
   Part No SW: 5Q0 937 084 CL    HW: 5Q0 937 084 AN
   Component: BCM MQBAB H   H24 0175  
   Serial number: 01061608900099
   Coding: 03011A42C24122F30BA44080B10C0728180000000000000000  0000000000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_BCMMQB 015001
   ROD: EV_BCMBOSCH_015.rod
   VCID: 844415890FF1DFA6AF-80D0

   Control Unit For Wiper Motor: 
   Subsystem 1 - Part No SW: 5G2 955 119 A    HW: 5G2 955 119 A  Labels: 5QX-955-119-V1.CLB
   Component: WWS    160319  042 0551 
   Serial number:         160331163728
   Coding: 0E4DDD

   Rain Light Recognition Sensor: 
   Subsystem 2 - Part No SW: 5Q0 955 547 A    HW: 5Q0 955 547 A  Labels: 5Q0-955-547.CLB
   Component: RLHS  037 0059 
   Serial number: S5Y16M04D08H12M39S10
   Coding: 06A8DD

   Sensor For Anti Theft Alarm System: 
   Subsystem 3 - Part No SW: 5Q0 951 172     HW: 5Q0 951 172 
   Component: Sensor, DWA  005 0316 
   Serial number: 000000000ZY1603908L8

   Alarm horn: 
   Subsystem 4 - Part No SW: 5Q0 951 605 A    HW: 5Q0 951 605 A
   Component: Sirene, DWA  005 0313 
   Serial number: 00000000000065496712

9 Faults Found:
6922 - Bulb for Low Beam Headlamp Right 
          B1218 15 [008] - Open or Short to Plus
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 1
                    Fault Frequency: 3
                    Reset counter: 206
                    Mileage: 62539 km
                    Date: 2020.08.01
                    Time: 18:54:44

7943 - Reflector Actuator for Right Low Beam Headlamp 
          B121C 11 [009] - Short to Ground
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 3
                    Fault Frequency: 3
                    Reset counter: 173
                    Mileage: 62539 km
                    Date: 2020.08.01
                    Time: 18:59:43

12554 - Bulb for Left Back-up Light 
          B12CB 15 [008] - Open or Short to Plus
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 193
                    Mileage: 62574 km
                    Date: 2020.08.01
                    Time: 23:40:30

16650 - Bulb 2 for Rear Left Turn Signal 
          B12CE 15 [009] - Open or Short to Plus
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 143
                    Mileage: 62338 km
                    Date: 2020.07.28
                    Time: 14:16:42

16906 - Bulb 2 for Rear Right Turn Signal 
          B12CF 15 [009] - Open or Short to Plus
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 144
                    Mileage: 62338 km
                    Date: 2020.07.28
                    Time: 14:18:23

18954 - Left LED Module for DRL and Parking Lights 
          B12EC F5 [008] - Control Circuit Open or Short to Plus
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 194
                    Mileage: 62541 km
                    Date: 2020.08.01
                    Time: 20:44:21

19466 - Right LED Module for DRL and Parking Lights 
          B12ED F5 [008] - Control Circuit Open or Short to Plus
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 2
                    Reset counter: 194
                    Mileage: 62541 km
                    Date: 2020.08.01
                    Time: 20:44:47

526359 - Control Module Incorrectly Coded 
          U1014 00 [009] - -
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 152
                    Mileage: 62539 km
                    Date: 2020.08.01
                    Time: 19:07:46

526615 - Control Module Incorrectly Coded 
          U1014 00 [008] - -
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 6
                    Reset counter: 213
                    Mileage: 62541 km
                    Date: 2020.08.01
                    Time: 20:44:21


-------------------------------------------------------------------------------
Address 10: Park/Steer Assist (J446)       Labels:| 5Q0-919-283.clb
   Part No SW: 5Q0 919 283 G    HW: 5Q0 919 283 
   Component: PARKHILFE 4K  H10 0056  
   Revision: --------    Serial number: 39291609503352
   Coding: 0001154011
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_EPHVA14AU3700000 002024
   ROD: EV_EPHVA14AU3700000_002_VW37.rod
   VCID: BD32A06D2C9B6E6EA0-80E8

No fault code found.

-------------------------------------------------------------------------------
Address 13: Auto Dist. Reg (J428)       Labels:| 5Q0-907-572-V1.clb
   Part No SW: 5Q0 907 572 F    HW: 5Q0 907 572 F
   Component: ACC Bosch MQB H05 0400  
   Serial number: 27021603210675
   Coding: 001C1300FE0739
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_ACCMRRBoschVW372 001016
   ROD: EV_ACCMRRBoschVW372_VW26.rod
   VCID: BA38AB713DB5595685-80EE

No fault code found.

-------------------------------------------------------------------------------
Address 14: Susp. Elect. (J250)       Labels: 5Q0-907-376.clb
   Part No SW: 5Q0 907 376 A    HW: 5Q0 907 376 A
   Component: DAEMPFUNGS-SG H17 0120  
   Serial number: 10031641350510
   ASAM Dataset: EV_DRCONTITEMIC 001019
   ROD: EV_DRCONTITEMIC_VW37.rod
   VCID: B73EB2450EA7443E7A-80E2

No fault code found.

-------------------------------------------------------------------------------
Address 15: Airbags (J234)       Labels:| 5Q0-959-655.clb
   Part No SW: 5Q0 959 655 D    HW: 5Q0 959 655 D
   Component: AirbagVW20    015 0388  
   Serial number: 003F6R1LFRVH
   Coding: 98CCC000000000005C00000000C800000065
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_AirbaVW20SMEVW37X 002130
   ROD: EV_AirbaVW20SMEVW37X_VW37.rod
   VCID: C1CADC9D50630A8EC4-8094

   Side Sensor Driver Front: 
   Subsystem 1 - Part No SW: -----------    HW: 480 000 704 16
   Component: SideSensor_Df  001 0887 
   Serial number: 3576700000022AB46A1V
   Coding: 2D2D2D

   Side Sensor Passenger Front: 
   Subsystem 2 - Part No SW: -----------    HW: 480 000 704 16
   Component: SideSensor_Pf  001 0887 
   Serial number: 3586700000025DF85A12
   Coding: 2D2D2D

   Side Sensor Driver Rear: 
   Subsystem 3 - Part No SW: -----------    HW: 480 402 903 16
   Component: SideSensor_Dr  001 6149 
   Serial number: 3516502C920414E562FA
   Coding: 2D2D2D

   Side Sensor Passenger Rear: 
   Subsystem 4 - Part No SW: -----------    HW: 480 400 604 16
   Component: SideSensor_Pr  001 6149 
   Serial number: 3526502AB20414E1A23%
   Coding: 2D2D2D

   Front Sensor Driver: 
   Subsystem 5 - Part No SW: -----------    HW: 480 402 903 16
   Component: FrontSensor_D  001 6149 
   Serial number: 3556502B720414F4307+
   Coding: 2D2D2D

No fault code found.

-------------------------------------------------------------------------------
Address 16: Steering wheel (J527)       Labels:| 5Q0-953-549.clb
   Part No SW: 5Q0 953 507 HL    HW: 5Q0 953 549 E
   Component: Lenks. Modul  003 0120  
   Revision: --------    Serial number: 01041604221316
   Coding: 0410
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_SMLSKLOMQB 020001
   ROD: EV_SMLSKLOMQB_020_VW37.rod
   VCID: 875E02853EC7F4BECA-80D2

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments (J285)       Labels:| 5G0-920-XXX-17.clb-SRI3
   Part No SW: 5G0 920 756     HW: 5G0 920 756 
   Component: KOMBI         302 6420  
   Coding: 27AD09183F880008018A7A095400000000000000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_DashBoardVDDMQBAB 009046
   ROD: EV_DashBoardVDDMQBAB_009_VW37.rod
   VCID: E99A243D089322CE3C-80BC

No fault code found.

-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533)       Labels:| 5Q0-907-530-V1.clb
   Part No SW: 5Q0 907 530 AJ    HW: 5Q0 907 530 F
   Component: GW MQB High   128 1244  
   Revision: --------    Serial number: 0004684953
   Coding: 030100043F085900FB00027B9C0F0001000105000000000000  0000000000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_GatewLear 013020
   ROD: EV_GatewLear_013.rod
   VCID: F9BA747D7833924ECC-80AC

   Alternator: 

   Multi Function Steering Wheel Control Module: 
   Subsystem 2 - Part No SW: 5G0 959 442 N    HW: 5G0 959 442 N  Labels: 3C8-959-537.CLB
   Component: E221__MFL-DC1  H11 0040 
   Serial number: 29160000651990066127
   Coding: 2DFFFF

   Battery Monitoring Control Module: 
   Subsystem 3 - Part No SW: 5Q0 915 181 G    HW: 5Q0 915 181 G
   Component: J367-BDMHella  H04 8050 
   Serial number: 1361649703          

2 Faults Found:
66052 - Infotainment CAN Bus (SAE Bus E) 
          U0065 00 [008] - Performance
          [Globaler Timeout CAN-Infotainment]
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 3
                    Reset counter: 211
                    Mileage: 62530 km
                    Date: 2020.08.01
                    Time: 14:45:54

                    Supply voltage: Terminal 30: 12.4 V
                    Terminal 15: OFF

8531970 - Quiescent Current 
          U1406 00 [008] - Too High
          [Ruhestrom oberer Grenzwert überschritten]
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 7
                    Fault Frequency: 19
                    Reset counter: 210
                    Mileage: 62425 km
                    Date: 2020.07.28
                    Time: 23:36:17

                    Supply voltage: Terminal 30: 12.4 V
                    Terminal 15: OFF


-------------------------------------------------------------------------------
Address 2B: Steer. Col. Lock (J764)       Labels:* 5Q0-905-861.clb
   Part No SW: 5Q0 905 861 A    HW: 5Q0 905 861 A
   Component: ELV-MQBA      H01 0120  
   Revision: 00000000    Serial number: 16000059603007
   Coding: 5D00000000000000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_ELVMarquMQB 004111
   ROD: EV_ELVMarquMQB.rod
   VCID: B42485491FD1AF265F-80E0

No fault code found.

-------------------------------------------------------------------------------
Address 32: Differential Locks (J492)       Labels:* 0CQ-907-554.clb
   Part No SW: 0CQ 907 554 E    HW: 0CQ 907 554 E
   Component: Quersperre    H52 8042  
   Serial number: HA1-00011.11.15
   Coding: 0001
   Shop #: WSC 00000 000 00000
   ASAM Dataset: EV_LockElectHA1VW37X 001007
   ROD: EV_LockElectHA1VW37X.rod
   VCID: C7DEC2857E4734BE0A-8092

No fault code found.

-------------------------------------------------------------------------------
Address 3C: Lane Change (J1086)       Labels:| 5Q0-907-686.clb
   Part No SW: 5Q0 907 686 B    HW: 5Q0 907 686 B
   Component: HRE_Master    H12 0071  
   Serial number: 0399230744
   Coding: 02011203
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_HREntryHella 001028
   ROD: EV_HREntryHella_VW37.rod
   VCID: BC34AD693781676697-80E8

   Lane Change Assistant 2: 
   Subsystem 1 - Part No SW: 5Q0 907 685 B    HW: 5Q0 907 685 B
   Component: HRE_Slave  H12 0071 
   Serial number: 0399256121          
   Coding: 020112

No fault code found.

-------------------------------------------------------------------------------
Address 42: Door Elect, Driver (J386)       Labels:| 5QX-959-X93-42.clb
   Part No SW: 5Q4 959 593 E    HW: 5Q4 959 593 B
   Component: TSG FS        010 0031  
   Serial number: 0000166057989 
   Coding: 00151220D001040000001000
   Shop #: WSC 00028 028 00066
   ASAM Dataset: EV_DCUDriveSideEWMAXCONT 006001
   ROD: EV_DCUDriveSideEWMAXCONT.rod
   VCID: C7DEC2857E4734BE0A-8092

   Drivers Door Rear Control Module: 
   Subsystem 1 - Part No SW: 5Q0 959 812     HW: 5Q0 959 812   Labels: 5QX-959-81X-V1.CLB
   Component: FOND_FHSG_DRV  005 0005 
   Serial number: 00000000000009633870
   Coding: 0D0000

1 Fault Found:
65588 - Motor for Window Regulator 
          B1487 54 [008] - Missing Calibration / Basic Setting
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 3
                    Fault Frequency: 1
                    Reset counter: 183
                    Mileage: 62338 km
                    Date: 2020.07.28
                    Time: 14:01:37


-------------------------------------------------------------------------------
Address 44: Steering Assist (J500)       Labels:| 5Q0-909-144.clb
   Part No SW: 3Q0 909 144 J    HW: 3Q0 909 144 H
   Component: EPS_MQB_ZFLS  505 5063  
   Coding: 8103
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_SteerAssisMQB 012140
   ROD: EV_SteerAssisMQB_012_VW37.rod
   VCID: B93AB47D38B3524E8C-80EC

No fault code found.

-------------------------------------------------------------------------------
Address 52: Door Elect, Pass. (J387)       Labels:| 5QX-959-X92-52.clb
   Part No SW: 5Q0 959 592 E    HW: 5Q0 959 592 B
   Component: TSG BFS       020 0041  
   Serial number: 270316ECQ29861
   Coding: 001D1020DE01040000801000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_DCUPasseSideEWMAXKLO 006003
   ROD: EV_DCUPasseSideEWMAXCONT.rod
   VCID: C2C8D39155651196DD-8096

   Passengers Rear Door Control Module: 
   Subsystem 1 - Part No SW: 5Q0 959 811     HW: 5Q0 959 811   Labels: 5QX-959-81X-V1.CLB
   Component: FOND_FHSG_PSG  005 0005 
   Serial number: 00000000000009502039
   Coding: 150000

1 Fault Found:
65608 - Lamp for Ambient Speaker Illumination 
          B13C8 01 [008] - Electrical Failure
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 3
                    Fault Frequency: 1
                    Reset counter: 197
                    Date: 2000.00.00
                    Time: 00:00:00


-------------------------------------------------------------------------------
Address 55: Headlight Range (J745)       Labels:| 7P6-907-357.clb
   Part No SW: 7P6 907 357 D    HW: 7P6 907 357 A
   Component: AFS-ECU       H07 0090  
   Revision: --------    Serial number: --------------
   Coding: 029603000B000200
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_HeadlRegulVWAFSMQB 001120
   ROD: EV_HeadlRegulVWAFSMQB.rod
   VCID: C0CCD9995B690386CB-8094

   Left Headlamp Power Output Stage: 
   Subsystem 1 - Part No SW: 3D0 941 329 E    HW: 3D0 941 329 E  Labels: 3D0-941-329.CLB
   Component: LeiMo links  H01 0002 
   Coding: 2E0000

3 Faults Found:
5276400 - Power Output Module for Right Headlamp 
          C1082 F0 [137] - Not Coded
          MIL ON - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 4
                    Reset counter: 173

5276209 - Power Output Module for Right Headlamp 
          C1082 31 [137] - No Signal
          MIL ON - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 8
                    Reset counter: 173
                    Mileage: 62539 km
                    Date: 2020.08.01
                    Time: 18:54:43

9574400 - Bulb for Low Beam Headlamp Right 
          B1218 00 [008] - -
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 2
                    Reset counter: 206
                    Mileage: 62539 km
                    Date: 2020.08.01
                    Time: 18:54:47


-------------------------------------------------------------------------------
Address 5F: Information Electr. (J794)       Labels:| 5G0-035-MIB-STD2.clb
   Part No SW: 3Q0 035 846     HW: 3Q0 035 846 
   Component: MU-S-N-ER     820 0624  
   Serial number:               
   Coding: 02730008FF00000051510004000828001F0203D601200100C7
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_MUStd4CDELP 001001
   ROD: EV_MUStd4CDELP_VW37.rod
   VCID: EE905721317DC5F669-80BA

   Operating And Display Unit 1: 
   Subsystem 1 - Part No SW: 3G0 919 605 D    HW: 3G0 919 605 D
   Component: ABT_Std-2_Nav  H43 4064 
   Serial number: VWZ6Z9S1010287      

   Data medium: 
   Subsystem 2 - Part No SW: 5NA 919 866 AD    HW: -----------
   Component: MRM3 2020  --- 1310 
   Serial number: --------------------

1 Fault Found:
1543 - Control Module Incorrectly Coded 
          U1014 00 [009] - -
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 4
                    Fault Frequency: 1
                    Reset counter: 143
                    Mileage: 62338 km
                    Date: 2020.07.28
                    Time: 14:01:37

                    Voltage terminal 30: 11.4 V
                    Byte_Coding_Condition-byte_0_condition: OK
                    Byte_Coding_Condition-byte_1_condition: OK
                    Byte_Coding_Condition-byte_10_condition: ERROR
                    Byte_Coding_Condition-byte_11_condition: ERROR
                    Byte_Coding_Condition-byte_12_condition: ERROR
                    Byte_Coding_Condition-byte_13_condition: ERROR
                    Byte_Coding_Condition-byte_14_condition: ERROR
                    Byte_Coding_Condition-byte_15_condition: ERROR
                    Byte_Coding_Condition-byte_16_condition: ERROR
                    Byte_Coding_Condition-byte_17_condition: ERROR
                    Byte_Coding_Condition-byte_18_condition: ERROR
                    Byte_Coding_Condition-byte_19_condition: ERROR
                    Byte_Coding_Condition-byte_2_condition: OK
                    Byte_Coding_Condition-byte_20_condition: ERROR
                    Byte_Coding_Condition-byte_21_condition: ERROR
                    Byte_Coding_Condition-byte_22_condition: ERROR
                    Byte_Coding_Condition-byte_23_condition: ERROR
                    Byte_Coding_Condition-byte_24_condition: ERROR
                    Byte_Coding_Condition-byte_25_condition: ERROR
                    Byte_Coding_Condition-byte_26_condition: ERROR
                    Byte_Coding_Condition-byte_27_condition: ERROR
                    Byte_Coding_Condition-byte_3_condition: OK
                    Byte_Coding_Condition-byte_4_condition: OK
                    Byte_Coding_Condition-byte_5_condition: OK
                    Byte_Coding_Condition-byte_6_condition: OK
                    Byte_Coding_Condition-byte_7_condition: OK
                    Byte_Coding_Condition-byte_8_condition: OK
                    Byte_Coding_Condition-byte_9_condition: OK


-------------------------------------------------------------------------------
Address A9: Struct. Borne Sound (J869)       Labels: 4H0-907-159.clb
   Part No SW: 5G0 907 159 E    HW: 4H0 907 159 A
   Component: SAS-GEN 2     H07 0002  
   Serial number: 160302201802
   ASAM Dataset: EV_SoundActuaGen2AU64X 003010
   ROD: EV_SoundActuaGen2AU64X.rod
   VCID: B02C8959EBC993063B-80E4

No fault code found.

End----(Elapsed Time: 02:14, VBatt start/end: 12.0V/12.0V. VIgn 12.0V)-----

Hoping you can provide further guidance here. Would really like the inner projector to work but it's being so stubborn :mad:
 
   #5  
S

StorableComa

Verified VCDS User
Verified
Joined
Aug 7, 2020
Messages
27
Reaction score
1
Location
USA
VCDS Serial number
C?ID=219649
Hey P1xellat3d,

Curious if you've attempted to change your VCDS coding to Halogen? I would think you'd need to do the reverse coding of a halogen to bi-xenon upgrade. I'm not sure on the VLAND lights, but a lot of these projector reps made to upgrade Halogens have all the electronics internally to draw the same power as your halogens - hence plug and play with no bulb out errors. I'm curious if your settings are still setup for AFS and auto-leveling with LED lights?

Below is the coding adaptations for a NAR 2014 Mk7 GTI going from Halogen to Factory Bi-xenon. Maybe compare his before values to yours?:
Code: 
Don (DV52) our forum hero who has spent many an hour putting tutorials and information together for the benefit of the community put together a BCM comparison matrix of a number of over twenty MK7 GTI configuration. I took a column that had my car and one that had a NAR lighting package and did a comparison of the light channels 0 through 11 to determine what changes needed to be made. The file is located here: https://www.dropbox.com/s/me4v48fa8n..._8_6.xlsx?dl=0 Another source is Don’s Lighting Explanation found here: https://www.dropbox.com/s/74b00lkimj...n_5_2.pdf?dl=0 Your configuration may be different, but for mine I had to make the following changes: For light channels 2 and 3 adaptation files 1, 2, 3, 4, 8, 11, 12, 13, and 14 needed to be changed. For light channels 4 and 4 adaptation files 1, 2, 3, 6, 13, and 14 needed to be changed. For light channels 8 and 9 adaptation files 1, 2, 3, 4, 5, and 6 needed to be changed. For light channels 10 and 11 adaptation files 1, 2, 3, 4, 5, and 6 needed to be changed. My changes are below.

Coding Changes:

Byte 02 - 02 Lighting: Bi-xenon w/o light assist - Reverse would be ENG141650-ENG141973-Fernlicht_assistent-Erweiterte_Fernlichtsteuerung > Basis or bit 00
Byte 06 - 20 Xenon - Shutter (PR-8IG/8IM/8IP) installed -reverse would be ENG141647-ENG141986-Außenlicht_Front-Abblendlicht_Leuchtentyp > H7? Not sure I'd have to double check my current setup.

Adaptations Changes:

Leuchte10SHUTTER LB23-Lasttyp 10 from not active to 2 - Shutter: Diagnosesensierung für 'LED low'

Leuchte10SHUTTER LB23-Lampendefektbitposition 10 from 0 to 37

Leuchte10SHUTTER LB23-Lichtfunktion A 10 from not active to Left high beam

Leuchte10SHUTTER LB23-Fehlerort mittleres Byte DTC-DFCC 10 from 0 to 1E

Leuchte10SHUTTER LB23-Lichtfunktion B 10 from not active to Lichthupe generell

Leuchte10SHUTTER LB23-Dimmwert AB 10 from 0 to 127



Leuchte11SHUTTER RB22-Lasttyp 11 from not active to 2 - Shutter: Diagnosesensierung für 'LED low'

Leuchte11SHUTTER RB22-Lampendefektbitposition 11 from 0 to 41

Leuchte11SHUTTER RB22-Fehlerort mittleres Byte DTC-DFCC 11 from 0 to 1F

Leuchte11SHUTTER RB22-Lichtfunktion A 11 from not active to Right high beam

Leuchte11SHUTTER RB22-Lichtfunktion B 11 from not active to Lichthupe generell

Leuchte11SHUTTER RB22-Dimmwert AB 11 from 0 to 127



Leuchte2SL VLB10-Lasttyp 2 from 10 - allgemeine Scheinwerfer to 4 - LED Tagfahrlichtmodul Signal

Leuchte2SL VLB10-Lampendefektbitposition 2 from 0 to 48

Leuchte2SL VLB10-Fehlerort mittleres Byte DTC-DFCC 2 from 45 to 4A

Leuchte2SL VLB10-Lichtfunktion A 2 from Standlicht allgemein (Schlusslicht: Positionslicht: Begrenzungslicht) to Daytime running lights

Leuchte2SL VLB10-Lichtfunktion C 2 from not active to Blinken links aktiv (beide Phasen)

Leuchte2SL VLB10-Dimming Direction CD 2 from maximize to minimize

Leuchte2SL VLB10-Lichtfunktion E 2 from not active to Standlicht allgemein (Schlusslicht: Positionslicht: Begrenzungslicht)

Leuchte2SL VLB10-Lichtfunktion F 2 from not active to Parklicht links (beidseitiges Parklicht aktiviert li & re)

Leuchte2SL VLB10-Dimmwert EF 2 from 0 to 26



Leuchte3SL VRB21-Lasttyp 3 from 10 - allgemeine Scheinwerfer to 4 - LED Tagfahrlichtmodul Signal

Leuchte3SL VRB21-Lampendefektbitposition 3 from 0 to 4C

Leuchte3SL VRB21-Fehlerort mittleres Byte DTC-DFCC 3 from 46 to 4C

Leuchte3SL VRB21-Lichtfunktion A 3 from Standlicht allgemein (Schlusslicht: Positionslicht: Begrenzungslicht) to Daytime running lights

Leuchte3SL VRB21-Lichtfunktion C 3 from not active to Blinken rechts aktiv (beide Phasen)

Leuchte3SL VRB21-Dimming Direction CD 3 from maximize to minimize

Leuchte3SL VRB21-Lichtfunktion E 3 from not active to Standlicht allgemein (Schlusslicht: Positionslicht: Begrenzungslicht)

Lichtfunktion F 3 from not active to Parking light right

Leuchte3SL VRB21-Dimmwert EF 3 from 0 to 26



Leuchte4TFL LB4-Lasttyp 4 from 9 - allgemeine Glühlampe 27W: auch H15 to 1 - LED Tagfahrlichtmodul Versorgung

Leuchte4TFL LB4-Lampendefektbitposition 4 from 48 to 3A

Leuchte4TFL LB4-Fehlerort mittleres Byte DTC-DFCC 4 from 43 to 49

Leuchte4TFL LB4-Dimmwert AB 4 from 100 to 127

Leuchte4TFL LB4-Lichtfunktion F 4 from not active to Parklicht links (beidseitiges Parklicht aktiviert li & re)

Leuchte4TFL LB4-Dimmwert EF 4 from 31 to 127



Leuchte5 TFL RB32-Lasttyp 5 from 9 - allgemeine Glühlampe 27W: auch H15 to 1 - LED Tagfahrlichtmodul Versorgung

Leuchte5 TFL RB32-Lampendefektbitposition 5 from 4C to 44

Leuchte5 TFL RB32-Fehlerort mittleres Byte DTC-DFCC 5 from 44 to 4B

Leuchte5 TFL RB32-Dimmwert AB 5 from 100 to 127

ENG116555-Leuchte5 TFL RB32-Lichtfunktion F 5 from not active to Parking light right

Leuchte5 TFL RB32-Dimmwert EF 5 from 31 to 127





Leuchte8FL LB39-Lasttyp 8 from 10 - allgemeine Scheinwerfer to 36 - LED Kleinleistung

Leuchte8FL LB39-Lampendefektbitposition 8 from 37 to 35

Leuchte8FL LB39-Fehlerort mittleres Byte DTC-DFCC 8 from 1C to 26

Leuchte8FL LB39-Lichtfunktion A 8 from Left high beam to Standlicht allgemein (Schlusslicht: Positionslicht: Begrenzungslicht)

Leuchte8FL LB39-Lichtfunktion B 8 from Lichthupe generell to Parklicht links (beidseitiges Parklicht aktiviert li & re)

ENG116029-Leuchte8FL LB39-Dimmwert AB 8 from 100 to 127



Leuchte9FL RB2-Lasttyp 9 from 10 - allgemeine Scheinwerfer to 36 - LED Kleinleistung

Leuchte9FL RB2-Lampendefektbitposition 9 from 41 to 3F

Leuchte9FL RB2-Fehlerort mittleres Byte DTC-DFCC 9 from 1D to 27

Leuchte9FL RB2-Lichtfunktion A 9 from Right high beam to Standlicht allgemein (Schlusslicht: Positionslicht: Begrenzungslicht)

Leuchte9FL RB2-Lichtfunktion B 9 from Lichthupe generell to Parking light right

Leuchte9FL RB2-Dimmwert AB 9 from 100 to 127

I also made coding changes to let car know I have xenon lights, byte 2 bi-xenon without light assist, and byte 6 bit 5-6 xenon shutter installed.

You now have properly functioning lights, but you do not have AFS.

----
Code your CAN Gateway. Take the Code that you have from your old module and put in new module with one change. Byte 11 bit 1 should be a 1 not a 0. I found this by comparing LP and non-LP cars. Currently there is not a description for this in the VAGCOM long coding; however, Ross-Tech is aware of the issue and may update in a revision. So byte 11 in Hex goes from 28 to 2A.

Coding:
0101000820085900EF0000281C0F0000000105000000000000 0000000000

0101000820085900EF00002A1C0F00000001050000000000000000000000

---

VAGCOM changes to introduce AFS to CANBUS, Code AFS, Add Auto-leveling to Instruments - Use Vagcom to tell CANBUS module that AFS control module has been added. Select 19 CAN Gateway, then installation list and check the box next to 55 Xenon Range and execute.

Code AFS: Note when the AFS is properly coded it will automatically code the AFS slave modules on the lights. I attempted to use the long coding and check what was applicable; however, received errors. Finally used admap from Rosstech forum for 2016 GTI Autobahn: Coding: 021A01010B000400 Changed the bit from NAR to ROW so ended up with 021A01000B000400. Once coded it should look like this, which shows slave controllers at headlight have also been coded by master AFS module:

Address 55: Headlight Range (J745) Labels: 7P6-907-357.clb

Part No SW: 7P6 907 357 A HW: 7P6 907 357 A

Component: AFS-ECU H07 0080

Revision: -------- Serial number: --------------

Coding: 021A01000B000400

Shop #: WSC 01608 666 28888

ASAM Dataset: EV_HeadlRegulVWAFSMQB 001120

ROD: EV_HeadlRegulVWAFSMQB.rod

VCID: 3D5FCAA7ACB8CCA9C8-8068



Left Headlamp Power Output Stage:

Subsystem 1 - Part No SW: 5N0 941 329 HW: 5N0 941 329 Labels: 3D0-941-329.CLB

Component: LeiMo links H01 0004

Coding: 2E0000



Right Headlamp Power Output Stage:

Subsystem 2 - Part No SW: 5N0 941 329 HW: 5N0 941 329 Labels: 3D0-941-329.CLB

Component: LeiMo rechts H01 0004

Coding: 2E0000

One more change to the Instrument Module 17. Change byte 4 bit 3 by checking autoleveling. In my case byte 4 went from 21 to 29. If you do not do this after adding AFS you will get a failure in instrument module of “incorrectly coded”.

Also, question on your harness. https://www.aliexpress.com/item/4000849328042.html - This looks like it might be for a MK7.5 (facelift) headlight conversion. Most of the reps with a "7.5" look still connect to the Mk7 (15-17) Halogen harnesses. Are you sure this is the correct harness you'd need?

I could be wrong as i'm using what I know about the NAR lighting setup, not sure they wired them differently on your side of the world. Examples below.
https://www.carsystems.eu/vw-golf-v...d-headlights-with-led-drl-adapter,id1166.html
https://www.kufatec.com/de/volkswag...ter-bi-xenonscheinwerfer-fuer-vw-golf-7-39892

Just throwing out ideas, not sure if this will help.

Sean
 
Last edited:
   #6  
DV52

DV52

Verified VCDS User
Verified
Joined
May 16, 2014
Messages
5,469
Reaction score
5,935
Location
Melbourne, Australia
VCDS Serial number
C?ID=194404
StorableComa said:
Curious if you've attempted to change your VCDS coding to Halogen? I would think you'd need to do the reverse coding of a halogen to bi-xenon upgrade. I'm not sure on the VLAND lights, but a lot of these projector reps made to upgrade Halogens have all the electronics internally to draw the same power as your halogens - hence plug and play with no bulb out errors. I'm curious if your settings are still setup for AFS and auto-leveling with LED lights?
Click to expand...

Sean: When it comes to third party after market headlight fittings (which ALL claim to be OEM plug-and-play, but seldom are) - anything is possible!!!

As for your hypothesis about "reverse coding", remember the VLAND lights are designed to be retro fitted to vehicles that have incandescent headlight assemblies. This means that the VLAND lights expect to connect to a 10 x pin connector on the car loom- which by definition, doesn't have wires that operate shutter circuits of any kind. It's only on the 14 x pin headlight connectors that pin #22 & pin#23, Socket B (these are the BCM shutter pins) are terminated. OP has managed to circumvent the 10xpin-to-14 x pin problem by interposing a cross-wiring harness - but the VLAND fittings still believes that the car was factory fitted with incandescent lamps.

With the repeated caveat that anything is possible on non-OEM fittings - pure logic suggests that because of the 10 x pin expectation, the new headlights have been designed with incandescent power supply circuits in mind (not with HID shutters) - I reckon ;) So - notwithstanding that the VLAND fittings now appear to have their own shutters, doesn't change the fact that the power supply for the high-beams in the equipment still expects a halogen-like signal - I think! Hence my "low-hanging fruit" suggestion.

Don
 
Last edited:
  • Like
Reactions: Uwe
   #7  
DV52

DV52

Verified VCDS User
Verified
Joined
May 16, 2014
Messages
5,469
Reaction score
5,935
Location
Melbourne, Australia
VCDS Serial number
C?ID=194404
P1xellat3d said:
Hi Don,

After playing around with the settings you suggested, I have some even more bizarre findings to share.
:
Click to expand...

hmm....... "sharing" findings is good (bizarre, or otherwise). Alas in this case - didn't happen because the videos have restricted access.!! ;)

Please clear all the DTC s in your auto-scan and re-post

Don
 
Last edited:
   #8  
P1xellat3d

P1xellat3d

Verified VCDS User
Verified
Joined
Jul 21, 2020
Messages
42
Reaction score
15
Location
Australia
VCDS Serial number
C?ID=384108
Hi both,

I will post up another auto-scan after clearing DTCs within the next few days. @Don - I've changed the settings on those videos so you should be able to see them now.

I do also like the idea of "reversing" the Xenon coding so will also experiment with that after posting up the scan.


Kevin
 
   #9  
P1xellat3d

P1xellat3d

Verified VCDS User
Verified
Joined
Jul 21, 2020
Messages
42
Reaction score
15
Location
Australia
VCDS Serial number
C?ID=384108
Hi all,

Apologies that I dropped off for quite some time. The headlights themselves turned out to have some severe quality issues, which prompted me to return them back to the seller.

I now have a pair of headlights from Supernova (link to headlights) installed, using the same harness as previously. Fortunately, the hardware seems to be similar (if not the same) as the high beam behaviour can be replicated on these headlights also.

Below is an auto-scan (after clearing DTCs):

Code: 
Saturday,09,January,2021,10:47:29:59968
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 20.12.0.1 (x64)  HEX-NET CB: 0.4529.4
Data version: 20201125 DS322.1
www.Ross-Tech.com

Dealer/Shop Name: VCDS Coding Sydney

VIN: WVWZZZAUZGW301104   License Plate:
Mileage: 70555km-43840mi   Repair Order:



--------------------------------------------------------------------------------
--------------------------------------------------------------------------------


Chassis Type: AU-VW37 (5Q0)
Scan: 01 02 03 05 08 09 0E 10 13 14 15 16 17 19 2B 32 3C 42 44 52
          55 5F A9

VIN: WVWZZZAUZGW301104   Mileage: 70555km-43840miles

01-Engine -- Status: OK 0000
02-Auto Trans -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
05-Acc/Start Auth. -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
0E-Media Player 1 -- Status: Cannot be reached 0100
10-Park/Steer Assist -- Status: OK 0000
13-Auto Dist. Reg -- Status: OK 0000
14-Susp. Elect. -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: Malfunction 0010
19-CAN Gateway -- Status: Malfunction 0010
2B-Steer. Col. Lock -- Status: OK 0000
32-Differential Locks -- Status: OK 0000
3C-Lane Change -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
55-Headlight Range -- Status: Malfunction 0010
5F-Information Electr. -- Status: Malfunction 0010
A9-Struct. Borne Sound -- Status: OK 0000
-------------------------------------------------------------------------------
Address 01: Engine (J623-CJXE)       Labels:. 06K-907-425-V1.clb
   Part No SW: 5G0 906 259 K    HW: 06K 907 425 B
   Component: 2.0l R4 TFSI  H13 0001
   Revision: --H13--- 
   Coding: 091D00122464050B3000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_ECM20TFS0205G0906259K 001002
   ROD: EV_ECM20TFS0205G0906259K.rod
   VCID: 36203F4189AD3D34E8-8062

No fault code found.
Readiness: 1110 0001

-------------------------------------------------------------------------------
Address 02: Auto Trans (J743)       Labels: 0D9-927-770.clb
   Part No SW: 0D9 300 020 K    HW: 02E 927 770 AQ
   Component: DQ250-6V MQB  H53 4933
   Revision: 06253104    Serial number: TFK01601290863
   Coding: 0014
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_TCMDQ250021 001001
   ROD: EV_TCMDQ250021.rod
   VCID: 1D72C0ED0C5B8E6C09-8048

No fault code found.

-------------------------------------------------------------------------------
Address 03: ABS Brakes (J104)       Labels: 5Q0-907-379-IPB-V1.clb
   Part No SW: 3Q0 907 379 AB    HW: 3Q0 907 379 G
   Component: ESC           H42 0723
   Revision: 00000000    Serial number: 60946000000347
   Coding: 01FA93A15420296D0778060041C76980C92A94E0608296F7184250B9C288
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_Brake1UDSContiMK100IPB 034036
   ROD: EV_Brake1UDSContiMK100IPB_034.rod
   VCID: 7AB8EB71FD3519544C-802E

No fault code found.

-------------------------------------------------------------------------------
Address 05: Acc/Start Auth. (J518)       Labels:| 5Q0-959-435.clb
   Part No SW: 5Q0 959 435 A    HW: 5Q0 959 435
   Component: VWKESSYMQB    021 0604
   Revision: 00021000    Serial number: 0400065246
   Coding: 0F0C0C
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_KessyHellaMQBAB 002011
   ROD: EV_KessyHellaMQBAB_002.rod
   VCID: 3A382B71BDB5D9540C-806E

No fault code found.

-------------------------------------------------------------------------------
Address 08: Auto HVAC (J255)       Labels:| 5G0-907-044.clb
   Part No SW: 5G0 907 044 BC    HW: 5G0 907 044 BC
   Component: Climatronic   H03 1001
   Revision: 00001K08 
   Coding: 00120004200100001005004012101402
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_ACClimaBHBVW37X 004131
   ROD: EV_ACClimaBHBVW37X_004_VW37.rod
   VCID: 699AA43D8893A2CCB5-803C

   Fresh air blower control module (front):

   A/C pressure/coolant temperature sensor:

   Air quality sensor:

No fault code found.

-------------------------------------------------------------------------------
Address 09: Cent. Elect. (J519)       Labels:| 5Q0-937-08X-HV1.clb
   Part No SW: 5Q0 937 084 CL    HW: 5Q0 937 084 AN
   Component: BCM MQBAB H   H24 0175
   Serial number: 01061608900099
   Coding: 03011A42C2C122F30BA44080B10C07281802000000000000000000000000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_BCMMQB 015001
   ROD: EV_BCMBOSCH_015.rod
   VCID: 044495898FF15FA426-8050

   Wiper motor control module:
   Subsystem 1 - Part No SW: 5G2 955 119 A    HW: 5G2 955 119 A  Labels: 5QX-955-119-V1.CLB
   Component: WWS    160319  042 0551
   Serial number:         160331163728
   Coding: 0E4DDD

   Rain/Light Recognition Sensor:
   Subsystem 2 - Part No SW: 5Q0 955 547 A    HW: 5Q0 955 547 A  Labels: 5Q0-955-547.CLB
   Component: RLHS  037 0059
   Serial number: S5Y16M04D08H12M39S10
   Coding: 06A8DD

   Anti-theft alarm system sensor:
   Subsystem 3 - Part No SW: 5Q0 951 172     HW: 5Q0 951 172
   Component: Sensor, DWA  005 0316
   Serial number: 000000000ZY1603908L8

   Alarm horn:
   Subsystem 4 - Part No SW: 5Q0 951 605 A    HW: 5Q0 951 605 A
   Component: Sirene, DWA  005 0313
   Serial number: 00000000000065496712

No fault code found.

-------------------------------------------------------------------------------
Address 0E: Media Player 1
Cannot be reached

-------------------------------------------------------------------------------
Address 10: Park/Steer Assist (J446)       Labels:| 5Q0-919-283.clb
   Part No SW: 5Q0 919 283 G    HW: 5Q0 919 283
   Component: PARKHILFE 4K  H10 0056
   Revision: --------    Serial number: 39291609503352
   Coding: 0001154011
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_EPHVA14AU3700000 002024
   ROD: EV_EPHVA14AU3700000_002_VW37.rod
   VCID: 3D32206DAC9BEE6C29-8068

No fault code found.

-------------------------------------------------------------------------------
Address 13: Auto Dist. Reg (J428)       Labels:| 5Q0-907-572-V1.clb
   Part No SW: 5Q0 907 572 F    HW: 5Q0 907 572 F
   Component: ACC Bosch MQB H05 0400
   Serial number: 27021603210675
   Coding: 001C1300FE0739
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_ACCMRRBoschVW372 001016
   ROD: EV_ACCMRRBoschVW372_VW26.rod
   VCID: 3A382B71BDB5D9540C-806E

No fault code found.

-------------------------------------------------------------------------------
Address 14: Susp. Elect. (J250)       Labels: 5Q0-907-376.clb
   Part No SW: 5Q0 907 376 A    HW: 5Q0 907 376 A
   Component: DAEMPFUNGS-SG H17 0120
   Serial number: 10031641350510
   ASAM Dataset: EV_DRCONTITEMIC 001019
   ROD: EV_DRCONTITEMIC_VW37.rod
   VCID: 373E32458EA7C43CF3-8062

No fault code found.

-------------------------------------------------------------------------------
Address 15: Airbags (J234)       Labels:| 5Q0-959-655.clb
   Part No SW: 5Q0 959 655 D    HW: 5Q0 959 655 D
   Component: AirbagVW20    015 0388
   Serial number: 003F6R1LFRVH
   Coding: 98CCC000000000005C00000000C800000065
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_AirbaVW20SMEVW37X 002130
   ROD: EV_AirbaVW20SMEVW37X_VW37.rod
   VCID: 41CA5C9DD0638A8C4D-8014

   Crash sensor for side airbag: driver side:
   Subsystem 1 - Part No SW: -----------    HW: 480 000 704 16
   Component: SideSensor_Df  001 0887
   Serial number: 3576700000022AB46A1V
   Coding: 2D2D2D

   Front Passenger's Side Airbag Crash Sensor:
   Subsystem 2 - Part No SW: -----------    HW: 480 000 704 16
   Component: SideSensor_Pf  001 0887
   Serial number: 3586700000025DF85A12
   Coding: 2D2D2D

   Rear Side Airbag Crash Sensor (on driver's side):
   Subsystem 3 - Part No SW: -----------    HW: 480 402 903 16
   Component: SideSensor_Dr  001 6149
   Serial number: 3516502C920414E562FA
   Coding: 2D2D2D

   Passenger side rear thorax airbag crash sensor:
   Subsystem 4 - Part No SW: -----------    HW: 480 400 604 16
   Component: SideSensor_Pr  001 6149
   Serial number: 3526502AB20414E1A23%
   Coding: 2D2D2D

   Crash sensor for front airbag: driver side:
   Subsystem 5 - Part No SW: -----------    HW: 480 402 903 16
   Component: FrontSensor_D  001 6149
   Serial number: 3556502B720414F4307+
   Coding: 2D2D2D

No fault code found.

-------------------------------------------------------------------------------
Address 16: Steering wheel (J527)       Labels:| 5Q0-953-549.clb
   Part No SW: 5Q0 953 507 HL    HW: 5Q0 953 549 E
   Component: Lenks. Modul  003 0120
   Revision: --------    Serial number: 01041604221316
   Coding: 0410
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_SMLSKLOMQB 020001
   ROD: EV_SMLSKLOMQB_018_VW37.rod
   VCID: 075E8285BEC774BC43-8052

No fault code found.

-------------------------------------------------------------------------------
Address 17: Instruments (J285)       Labels:| 5G0-920-XXX-17.clb-SRI3
   Part No SW: 5G0 920 756     HW: 5G0 920 756
   Component: KOMBI         302 6420
   Coding: 27AD09183F800008018AFF295400000000000000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_DashBoardVDDMQBAB 009046
   ROD: EV_DashBoardVDDMQBAB_009_VW37.rod
   VCID: 699AA43D8893A2CCB5-803C

1 Fault Found:
16776996 - Databus
          U1121 00 [009] - Missing Message
          [FCW_01 keine Kommunikation]
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 6
                    Fault Frequency: 1
                    Reset counter: 180
                    Mileage: 70555 km
                    Date: 2021.01.09
                    Time: 10:44:15


-------------------------------------------------------------------------------
Address 19: CAN Gateway (J533)       Labels:| 5Q0-907-530-V1.clb
   Part No SW: 5Q0 907 530 AJ    HW: 5Q0 907 530 F
   Component: GW MQB High   128 1244
   Revision: --------    Serial number: 0004684953
   Coding: 030100043F085900FB00027B9C0F00010001050000000000000000000000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_GatewLear 013020
   ROD: EV_GatewLear_013.rod
   VCID: 79BAF47DF833124C45-802C

   Generator:

   Multifunction steering wheel control module:
   Subsystem 2 - Part No SW: 5G0 959 442 N    HW: 5G0 959 442 N  Labels: 3C8-959-537.CLB
   Component: E221__MFL-DC1  H11 0040
   Serial number: 29160000651990066127
   Coding: 2DFFFF

   Battery Monitoring Control Module:
   Subsystem 3 - Part No SW: 5Q0 915 181 G    HW: 5Q0 915 181 G
   Component: J367-BDMHella  H04 8050
   Serial number: 1361649703       

1 Fault Found:
131696 - Media player in position 1
          U105E 00 [009] - No Communication
          [Timeout Knoten 0x70 / 0E - Mediaplayer in Position 1]
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 180
                    Mileage: 70555 km
                    Date: 2021.01.09
                    Time: 10:44:15

                    Terminal 30 power supply: 14.2 V
                    Terminal 15: On


-------------------------------------------------------------------------------
Address 2B: Steer. Col. Lock (J764)       Labels:* 5Q0-905-861.clb
   Part No SW: 5Q0 905 861 A    HW: 5Q0 905 861 A
   Component: ELV-MQBA      H01 0120
   Revision: 00000000    Serial number: 16000059603007
   Coding: 5D00000000000000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_ELVMarquMQB 004111
   ROD: EV_ELVMarquMQB.rod
   VCID: 342405499FD12F24D6-8060

No fault code found.

-------------------------------------------------------------------------------
Address 32: Differential Locks (J492)       Labels:* 0CQ-907-554.clb
   Part No SW: 0CQ 907 554 E    HW: 0CQ 907 554 E
   Component: Quersperre    H52 8042
   Serial number: HA1-00011.11.15
   Coding: 0001
   Shop #: WSC 00000 000 00000
   ASAM Dataset: EV_LockElectHA1VW37X 001007
   ROD: EV_LockElectHA1VW37X.rod
   VCID: 47DE4285FE47B4BC83-8012

No fault code found.

-------------------------------------------------------------------------------
Address 3C: Lane Change (J1086)       Labels:| 5Q0-907-686.clb
   Part No SW: 5Q0 907 686 B    HW: 5Q0 907 686 B
   Component: HRE_Master    H12 0071
   Serial number: 0399230744
   Coding: 02011203
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_HREntryHella 001028
   ROD: EV_HREntryHella_VW37.rod
   VCID: 3C342D69B781E7641E-8068

   Lane change assistance control module 2:
   Subsystem 1 - Part No SW: 5Q0 907 685 B    HW: 5Q0 907 685 B
   Component: HRE_Slave  H12 0071
   Serial number: 0399256121       
   Coding: 020112

No fault code found.

-------------------------------------------------------------------------------
Address 42: Door Elect, Driver (J386)       Labels:| 5QX-959-X93-42.clb
   Part No SW: 5Q4 959 593 E    HW: 5Q4 959 593 B
   Component: TSG FS        010 0031
   Serial number: 0000166057989
   Coding: 001F1220D001040000001000
   Shop #: WSC 00028 028 00066
   ASAM Dataset: EV_DCUDriveSideEWMAXCONT 006001
   ROD: EV_DCUDriveSideEWMAXCONT.rod
   VCID: 47DE4285FE47B4BC83-8012

   Rear Driver Side Door Control Module:
   Subsystem 1 - Part No SW: 5Q0 959 812     HW: 5Q0 959 812   Labels: 5QX-959-81X-V1.CLB
   Component: FOND_FHSG_DRV  005 0005
   Serial number: 00000000000009633870
   Coding: 0D0000

No fault code found.

-------------------------------------------------------------------------------
Address 44: Steering Assist (J500)       Labels:| 5Q0-909-144.clb
   Part No SW: 3Q0 909 144 J    HW: 3Q0 909 144 H
   Component: EPS_MQB_ZFLS  505 5063
   Coding: 8103
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_SteerAssisMQB 012140
   ROD: EV_SteerAssisMQB_012_VW37.rod
   VCID: 393A347DB8B3D24C05-806C

No fault code found.

-------------------------------------------------------------------------------
Address 52: Door Elect, Pass. (J387)       Labels:| 5QX-959-X92-52.clb
   Part No SW: 5Q0 959 592 E    HW: 5Q0 959 592 B
   Component: TSG BFS       020 0041
   Serial number: 270316ECQ29861
   Coding: 001D1020DE01040000801000
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_DCUPasseSideEWMAXKLO 006003
   ROD: EV_DCUPasseSideEWMAXCONT.rod
   VCID: 42C85391D565919454-8016

   Rear Passenger Door Control Module:
   Subsystem 1 - Part No SW: 5Q0 959 811     HW: 5Q0 959 811   Labels: 5QX-959-81X-V1.CLB
   Component: FOND_FHSG_PSG  005 0005
   Serial number: 00000000000009502039
   Coding: 150000

No fault code found.

-------------------------------------------------------------------------------
Address 55: Headlight Range (J745)       Labels:| 7P6-907-357.clb
   Part No SW: 7P6 907 357 D    HW: 7P6 907 357 A
   Component: AFS-ECU       H07 0090
   Revision: --------    Serial number: --------------
   Coding: 029603000B000300
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_HeadlRegulVWAFSMQB 001120
   ROD: EV_HeadlRegulVWAFSMQB.rod
   VCID: 40CC5999DB69838442-8014

1 Fault Found:
13679104 - Local Data Bus
          U10BA 00 [137] - No Communication
          MIL ON - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 180
                    Mileage: 70555 km
                    Date: 2021.01.09
                    Time: 10:44:16


-------------------------------------------------------------------------------
Address 5F: Information Electr. (J794)       Labels:| 5G0-035-MIB-STD2.clb
   Part No SW: 3Q0 035 846     HW: 3Q0 035 846
   Component: MU-S-N-ER     820 0624
   Serial number:             
   Coding: 02730008FF00000051510004000828001F0203D601200100C7
   Shop #: WSC 01357 011 00200
   ASAM Dataset: EV_MUStd4CDELP 001001
   ROD: EV_MUStd4CDELP_VW26.rod
   VCID: 6E90D721B17D45F4E0-803A

   Display and control head 1 for information electronics:
   Subsystem 1 - Part No SW: 3G0 919 605 D    HW: 3G0 919 605 D
   Component: ABT_Std-2_Nav  H43 4064
   Serial number: VWZ6Z9S1010287   

   Data carrier:
   Subsystem 2 - Part No SW: 5NA 919 866 AD    HW: -----------
   Component: MRM3 2020  --- 1310
   Serial number: --------------------

1 Fault Found:
1543 - Control Module Incorrectly Coded
          U1014 00 [009] - -
          Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 4
                    Fault Frequency: 1
                    Reset counter: 180
                    Mileage: 70555 km
                    Date: 2021.01.09
                    Time: 10:44:15

                    Voltage terminal 30: 14.3 V
                    Byte_Coding_Condition-byte_0_condition: OK
                    Byte_Coding_Condition-byte_1_condition: OK
                    Byte_Coding_Condition-byte_10_condition: ERROR
                    Byte_Coding_Condition-byte_11_condition: ERROR
                    Byte_Coding_Condition-byte_12_condition: ERROR
                    Byte_Coding_Condition-byte_13_condition: ERROR
                    Byte_Coding_Condition-byte_14_condition: ERROR
                    Byte_Coding_Condition-byte_15_condition: ERROR
                    Byte_Coding_Condition-byte_16_condition: ERROR
                    Byte_Coding_Condition-byte_17_condition: ERROR
                    Byte_Coding_Condition-byte_18_condition: ERROR
                    Byte_Coding_Condition-byte_19_condition: ERROR
                    Byte_Coding_Condition-byte_2_condition: OK
                    Byte_Coding_Condition-byte_20_condition: ERROR
                    Byte_Coding_Condition-byte_21_condition: ERROR
                    Byte_Coding_Condition-byte_22_condition: ERROR
                    Byte_Coding_Condition-byte_23_condition: ERROR
                    Byte_Coding_Condition-byte_24_condition: ERROR
                    Byte_Coding_Condition-byte_25_condition: ERROR
                    Byte_Coding_Condition-byte_26_condition: ERROR
                    Byte_Coding_Condition-byte_27_condition: ERROR
                    Byte_Coding_Condition-byte_3_condition: OK
                    Byte_Coding_Condition-byte_4_condition: OK
                    Byte_Coding_Condition-byte_5_condition: OK
                    Byte_Coding_Condition-byte_6_condition: OK
                    Byte_Coding_Condition-byte_7_condition: OK
                    Byte_Coding_Condition-byte_8_condition: OK
                    Byte_Coding_Condition-byte_9_condition: OK


-------------------------------------------------------------------------------
Address A9: Struct. Borne Sound (J869)       Labels: 4H0-907-159.clb
   Part No SW: 5G0 907 159 E    HW: 4H0 907 159 A
   Component: SAS-GEN 2     H07 0002
   Serial number: 160302201802
   ASAM Dataset: EV_SoundActuaGen2AU64X 003010
   ROD: EV_SoundActuaGen2AU64X.rod
   VCID: 302C09596BC91304B2-8064

No fault code found.

End----------(Elapsed Time: 01:57, VBatt start/end: 14.4V/14.3V)-----------

Any ideas on what I should try next? Should I try and revert back to halogen coding as suggested above?

Cheers,
Kev
 
Last edited:
   #10  
DV52

DV52

Verified VCDS User
Verified
Joined
May 16, 2014
Messages
5,469
Reaction score
5,935
Location
Melbourne, Australia
VCDS Serial number
C?ID=194404
@P1xellat3d : Welcome back cobber!!

To refresh my (and the forum's) understanding, a short recap:
  • your first try at replacing headlight assemblies on an Aussie mk7 with factory Xenon fittings was to use third party mk7.5 units where "advice from the seller's disclaimer [was] that these headlights do not work with cars with factory Xenons" (quote from first post above).
  • The first try units were subsequently returned to the seller - the second try was another pair of third party mk7.5 units which has the seller's warning:
mk7-compatible-headlight_a77d61e3-94f2-4613-b370-6ed0b40fdbaf.jpg


I like your delightfully consistent approach to this project- respect!!! :D

So for clarification, having had the benefit of 2 x different manufacturer's headlight units retro-fitted to the car -is the observation in your post below (probably not kosher to open a separate post on another forum thread about the same matter) the ONLY difference in how the high beams have failed to operate correctly in the 2 x attempts?
P1xellat3d said:
Hi all,
I am having trouble with my high beam not turning on when the stalk is pushed forward. The high beams work just as intended when the stalk is pulled back, but when it is pushed in, the dash would show the blue high-beam symbol, but no high beams would come on.
My car does not have a front camera so I am not referring to high beam assist.
Could someone please point me to the correct adaptation channel to fix this?
Cheers,
K
Click to expand...

On a Golf mk7 with bog-standard HID factory fitted headlight assemblies, the high-beam lamps operate via the Leuchte-sets Leuchte10SHUTTER LB23 (left-side) and Leuchte11SHUTTER RB22 (right-side).

Normally, the high-beam "flash" facility is controlled by Lichtfunktion B on both Leuchte-sets via the Leuchte-command Lichthupe generell. And, the high beam "push-in" facility is controlled by Lichtfunktion A via the Leuchte-command Right/left high beam (depending on the right/left Leuchte-set). Do the channels below have the settings as shown on your BCM?

ENG116946-ENG116065-Leuchte10SHUTTER LB23-Lichtfunktion A 10 > Left high beam
ENG116947-ENG116084-Leuchte11SHUTTER RB22-Lichtfunktion A 11 > Right high beam

Don
 
   #11  
P1xellat3d

P1xellat3d

Verified VCDS User
Verified
Joined
Jul 21, 2020
Messages
42
Reaction score
15
Location
Australia
VCDS Serial number
C?ID=384108
Don, I have to say you are again spot on with your diagnosis!

During my experimentation (and the experimentation of another Sydney-based VCDS expert), the coding for the above channels you mentioned were both changed to "Lichthupe Generell". Reverting the channels back to Left high beam and Right high beam (respectively) has indeed fixed the issue with the high beam stalk pushed forward issue.

(On a site note, I wasn't sure if the stalk-related high beam issue was related to the retrofit of these headlights, as I was having the same problem even with the factory bi-xenons fitted, hence my post in the other part of the forum. In any case, you have managed to diagnose the issue for me, so I will go ahead and close the other thread) :)

DV52 said:
I like your delightfully consistent approach to this project- respect!!! :D
Click to expand...

Haha, thank you. I am fully determined to get these working! The new headlights are bright enough to replace the original static cornering light, and the AFS on the original lights didn't seem to be turning with the steering wheel anyway :p



Now, back to the main dilemma at hand. The newly retrofitted headlights have the same problem as the ones I fitted previously. To summarise:
  • The newly fitted headlights have two sources of high beam light.
    • The first source of high beam light comes from the dipped beam shutter "opening" which opens up the rest of the projector lens. These are the the "outer" projector lens that are closer to the left and right wheels of the vehicle.
    • The second source of high beam comes from a secondary projector lens. These are the "inner" projector lens that are closer to the centre grille of the vehicle.
      • This source appears to work the same as what a factory halogen assembly would, except on factory halogen assemblies this would be the ONLY source of high beam.'
      • The light in this particular position is also very different to that of a factory bi-xenon. On the factory bi-xenon, there is an LED dot (looks more like a small rectangle) in this position of the headlight, which looks like this:

nh6bs367iqe01.png


  • Nearly all functions of the newly fitted headlight appear to be working correctly, including:
    • Low beams;
    • High beams (shutter activated);
    • Daytime running lights; and
    • Turning indicators.
  • The vehicle's MFD displays an "Error: Cornering Light (AFS)" and on the Infotainment it displays "Error: Bend Lighting (AFS)" which is fully expected, given that the new headlight has no AFS module and the vehicle is no longer able to communicate with it. I think this is separate and unrelated to what we are currently looking at, so am happy to leave that aside for now if possible.
  • The only observable fault is that the "inner" projector lens fails to stay on when the high beam stalk is pulled (or pushed). When the high beam stalk is pulled:
    • The "inner" projector lens will illuminate for a brief second, but immediately switch off. This causes the shutter of the "outer" projector lens to also close. The immediate shut off behaviour is very remiscent of a circuit breaker or fuse trip, however I am able to keep pulling the stalk back and replicate the behaviour without any fuse changes.
    • As a temporary measure, I have disconnected the "inner" projector lens LEDs. This allows the "outer" projector lens shutter to still function (thereby allowing me to still have some high beams for the interim).
    • On the previous headlight assembly, I have tried both halogen H7 bulbs, as well as LEDs in the "inner" projector lens, however both would exhibit the same behaviour (i.e. flash and shut off).

My current speculation is the following (and it is purely speculation at this point, because I know very little about how these cars are wired):
  • The vehicle is not expecting a power draw from that particular position/curcuit of the headlight OR a power draw of that level (remember, the original light in that position is a tiny LED dot); and
  • this is causing some form of cuircuit break / shut-off to occur, which informs the car that something is unexpected and the high beam should not be on any further.

What are your thoughts?
Kev
 
Last edited:
   #12  
DV52

DV52

Verified VCDS User
Verified
Joined
May 16, 2014
Messages
5,469
Reaction score
5,935
Location
Melbourne, Australia
VCDS Serial number
C?ID=194404
@P1xellat3d - Kev: My thoughts are total speculation too, but here goes:-

I suggest that you forget entirely about making inferences regarding which wire does what based on the position of the lamp in the respective headlight housing. Whilst I suspect that the actual physical lamp position will be determined by the relevant road rules in the country of sale, it is unlikely to be pertinent to how the light functions are pinned on the headlight connector for the different manufacturers.
The manufacturer of your new headlights says "Fits: All Golf MK7 with factory fitted halogen/reflector headlights, TSI/TDI/GTI. 10 Pin Sockets" (see your link). Pure logic dictates therefore that the high beam lamp function is terminated on pin #8 on the 10 x pin connector on the new fittings because this is the arrangement on OEM fittings for incandescent 10 x pin connectors. It also happens to be the same pin number Pin #11 is used for the shutter operation on HID 14 x pin connectors.

The wire on the loom-side of pin #8 on the OEM 10 x pin incandescent connector, terminates at the BCM on pin#39, Socket B (left-side high-beam) and pin#2, Socket B (right-side high-beam)

And, the wire on the loom-side of pin #811 on the OEM 14 x pin HID connector terminates at the BCM on pin #22 (left-side shutter) and pin #23 (right-side shutter), Socket B.

If you physically eyeball these pins on the BCM housing, you will find that the shutter pins are the smallest of the 3 x BCM pin sizes and the incandescent high-beam pins are the middle size. This strongly suggests (to me at least) that the shutter pins are designed for signal voltages and the incandescent high-beam pins are designed for power-supply purposes (i.e. normal, 55 Watt lamps).

Now, clearly pin #811 on both sides of the 14 x pin and pin #8 on the 10 x pin connectors are wired together on your cross wiring harness - but if my hypothesis above is correct, the expectation of the new headlights that pin#8 can supply up to 55 watts per car-side when the high-beam function is energized might be a tad exaggerated on your set-up!! I'm not sure of the designed power rating of the shutter function inside the BCM, but I very much suspect that it ain't anywhere close to 55 Watts/side.

I don't know what happens inside the new headlight fittings but clearly the BCM shutter pins have sufficient amperes to fire-up the 2 x outer projectors. However, when the additional projectors are added to the electrical load, I suspect the power supply for the shutter pins inside the BCM collapses - hence the dynamic that you have observed?

So - if I'm correct (and I repeat, this is mere conjecture) , how to fix the problem? Well..... I suggest that the first step is to confirm (or not) my hypothesis. Perhaps try this: remove the wire from pin #8 on one of the new headlight fitting connectors. Then hook-up a temporary wire and an in-line fuse (55 Watts translates to about 5 amps - so use a 10 Amp fuse). Turn-on the ignition and connect the make-shift high-beam supply to battery +ve - do both projectors illuminate?

If so, perhaps consider an interposing relay with its coil triggered by one of the BCM shutter pins. I suspect that the shutter pins might be PWM waveform, but if you use a slow acting relay, the inherent PWM frequency, shouldn't be a problem. If the relay oscillates, simply include a 100 micro farad capacitor across the coil terminals ( and, for good measure, it might be prudent to also choose a relay with a free-wheeling diode to deal with the tuned circuit that results from the capacitor/inductor arrangement)- maybe

Once more, these are stream-of-consciousness guesses

Don

EDIT: post changed to correct error (pin #11 is the shutter pin on 14 x pin connector)
 
Last edited:
   #13  
P1xellat3d

P1xellat3d

Verified VCDS User
Verified
Joined
Jul 21, 2020
Messages
42
Reaction score
15
Location
Australia
VCDS Serial number
C?ID=384108
@DV52 - this might be a silly question, but is there a reference diagram for the various pin # you are referring to? Would love to have a go and validate your hypothesis, but I will need some time to digest what you've written (and also know where to begin my first incision) :p

On a separate note, would you happen to know what the correct way is to "code out" the AFS functionality? Since these new headlights no longer have this, I figured it was time to do this so the pesky dash error can go away.

Cheers
Kev
 
   #14  
DV52

DV52

Verified VCDS User
Verified
Joined
May 16, 2014
Messages
5,469
Reaction score
5,935
Location
Melbourne, Australia
VCDS Serial number
C?ID=194404
@P1xellat3d : Kev - the full answer to your first question is that ALL the pertinent information can be found in the WD (including pin numbers - and the meaning of life :D). This material can be obtained via erWin-portal.com which is a pay-for-service site - but it ain't too bad even with our Aussie "pacific peso" exchange rate. My advice is to buy the smallest access time and download as many of the repair manuals as possible onto your computer - Have your VIN ready and the WD document is called "basic equipment".

Anyhow, to whet your appetite - here's a very simplified version of the wiring arrangement for the left-side HID fitting - which I summarized and patched together from a number of pages in the WD. Notice at the bottom of my picture -I've included an explanation of the nomenclature that VW uses for their connectors (my apology if you already know this stuff)

cgIuX5Z.png


As for your second question: on your model mk7, the mechanism that tells the car what type of headlight fittings to operate is found on Byte 2, Bits 0-2 on the BCM long-code sting. Here's a summary of how these software switches work (note: this is not a VCDS list):
  • Halogen=hex00
  • Halogen_main_beam_assist=hex01
  • Xenon_AFS=hex02,
  • Xenon_AFS_and_main_beam_assist=hex03
  • Bi-xenon_AFS=hex04
  • Bi-xenon_AFS_and_main_beam_assist=hex05
  • Bi-xenon_AFS_and_MDF_GLW= hex06
From your auto-scan - the value of Byte 2 on your car is hex1A, or in binary 0001 1010. Remembering that binary numbers are read from right-to-left, this means that the Bits highlighted have an equivalent value of hex02 in the hexadecimal speak of the numbers in my list above (which is not surprising given that your car was factory fitted with HID headlight assemblies and your car doesn't have main beam assist).

So, again not surprisingly- there are no OEM options in the 3 x Bits for a headlight version of HID fittings without AFS. I guess you could opt for a setting of hex00, but I'm not sure if this will disturb other parts of the HID operation (I'm still not sure how the new fittings were integrated into the hex55 module -if at all?? Anyhow, if you try this, Byte 2 should have the value hex18, or binary 0001 1000 after the change.

Don

PS: When I was responding to your latest post, I realized that I had made a boo-boo in my post #12. I incorrectly asserted that pin#8 on the HID 14 x pin connector was used for shutter operation. As you can see from my diagram above, this should have been pin #11. I have corrected my error so as not to confused readers - my apology.

Don
 
  • Like
Reactions: Uwe
   #15  
DV52

DV52

Verified VCDS User
Verified
Joined
May 16, 2014
Messages
5,469
Reaction score
5,935
Location
Melbourne, Australia
VCDS Serial number
C?ID=194404
P1xellat3d said:
@DV52 ........... Would love to have a go and validate your hypothesis, but I will need some time to digest what you've written (and also know where to begin my first incision) :p
Click to expand...

Kev: A picture is worth 1000 words!!

Don

MGSFeiL.png
 
  • Like
Reactions: Uwe
   #16  
P1xellat3d

P1xellat3d

Verified VCDS User
Verified
Joined
Jul 21, 2020
Messages
42
Reaction score
15
Location
Australia
VCDS Serial number
C?ID=384108
DV52 said:
@P1xellat3d : Kev - the full answer to your first question is that ALL the pertinent information can be found in the WD (including pin numbers - and the meaning of life :D). This material can be obtained via erWin-portal.com which is a pay-for-service site - but it ain't too bad even with our Aussie "pacific peso" exchange rate. My advice is to buy the smallest access time and download as many of the repair manuals as possible onto your computer - Have your VIN ready and the WD document is called "basic equipment".

Anyhow, to whet your appetite - here's a very simplified version of the wiring arrangement for the left-side HID fitting - which I summarized and patched together from a number of pages in the WD. Notice at the bottom of my picture -I've included an explanation of the nomenclature that VW uses for their connectors (my apology if you already know this stuff)

cgIuX5Z.png


As for your second question: on your model mk7, the mechanism that tells the car what type of headlight fittings to operate is found on Byte 2, Bits 0-2 on the BCM long-code sting. Here's a summary of how these software switches work (note: this is not a VCDS list):
  • Halogen=hex00
  • Halogen_main_beam_assist=hex01
  • Xenon_AFS=hex02,
  • Xenon_AFS_and_main_beam_assist=hex03
  • Bi-xenon_AFS=hex04
  • Bi-xenon_AFS_and_main_beam_assist=hex05
  • Bi-xenon_AFS_and_MDF_GLW= hex06
From your auto-scan - the value of Byte 2 on your car is hex1A, or in binary 0001 1010. Remembering that binary numbers are read from right-to-left, this means that the Bits highlighted have an equivalent value of hex02 in the hexadecimal speak of the numbers in my list above (which is not surprising given that your car was factory fitted with HID headlight assemblies and your car doesn't have main beam assist).

So, again not surprisingly- there are no OEM options in the 3 x Bits for a headlight version of HID fittings without AFS. I guess you could opt for a setting of hex00, but I'm not sure if this will disturb other parts of the HID operation (I'm still not sure how the new fittings were integrated into the hex55 module -if at all?? Anyhow, if you try this, Byte 2 should have the value hex18, or binary 0001 1000 after the change.

Don

PS: When I was responding to your latest post, I realized that I had made a boo-boo in my post #12. I incorrectly asserted that pin#8 on the HID 14 x pin connector was used for shutter operation. As you can see from my diagram above, this should have been pin #11. I have corrected my error so as not to confused readers - my apology.

Don
Click to expand...

@DV52 Hey Don,

I tried the long coding of Byte 2 to the Halogen setting, however the car still seems to show the dash error.

OueSIZ0.png


hR50WV6.jpg


Noticeably, the error seems to come on after a few seconds of the ignition coming on (I think during the time where the headlights would usually do the left/right and up/down auto-level).

Also want to make a correction that both in MFD and Infotainment, the error displayed is "Error: cornering light (AFS)" and not "Error: bend lighting (AFS)".

All in all, I think the car is still somehow trying to communicate with auto-leveling headlights, and is freaking out when it's not getting any signal back?


Cheers
Kev
 
   #17  
DV52

DV52

Verified VCDS User
Verified
Joined
May 16, 2014
Messages
5,469
Reaction score
5,935
Location
Melbourne, Australia
VCDS Serial number
C?ID=194404
@P1xellat3d : hmm....... so tell us a tale of how the hex55 module was treated in this exercise?

Don
 
   #18  
P1xellat3d

P1xellat3d

Verified VCDS User
Verified
Joined
Jul 21, 2020
Messages
42
Reaction score
15
Location
Australia
VCDS Serial number
C?ID=384108
DV52 said:
@P1xellat3d : hmm....... so tell us a tale of how the hex55 module was treated in this exercise?

Don
Click to expand...

@DV52 Don, nothing has been changed for 55-Headlight Range. Is there something I should have done? A quick scan of hex55 module reveals the following:


Code: 
Monday,11,January,2021,20:21:37:59968
VCDS Version: Release 20.12.0 (x64) Running on Windows 10 x64
www.Ross-Tech.com
VCDS Coding Sydney
                Address 55: Headlight Range       Labels: 7P6-907-357.clb
Control Module Part Number: 7P6 907 357 D    HW: 7P6 907 357 A
  Component and/or Version: AFS-ECU       H07 0090
           Software Coding: 02D6011018000000
            Work Shop Code: WSC 01357 011 00200
              ASAM Dataset: EV_HeadlRegulVWAFSMQB 001120 (VW37)
                       ROD: EV_HeadlRegulVWAFSMQB.rod
                      VCID: 40CC5999DB69838442-8014
2 Faults Found:

5275220 - Headlight
          C107E 54 [137] - Missing Calibration / Basic Setting
          MIL ON - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 1
                    Fault Frequency: 1
                    Reset counter: 187
                    Mileage: 70849 km
                    Date: 2021.01.11
                    Time: 20:15:27

13679104 - Local Data Bus
          U10BA 00 [137] - No Communication
          MIL ON - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 187
                    Mileage: 70849 km
                    Date: 2021.01.11
                    Time: 20:15:26
 
   #19  
P1xellat3d

P1xellat3d

Verified VCDS User
Verified
Joined
Jul 21, 2020
Messages
42
Reaction score
15
Location
Australia
VCDS Serial number
C?ID=384108
Having searched online, I came across a thread where users are discussing the removal of certain fuses (combined with a few coding changes) to disable AFS:

Adaptive Lighting (APS) Disable/Fix - AudiWorld Forums

A6 / S6 (C6 Platform) Discussion - Adaptive Lighting (APS) Disable/Fix - I can't take credit for this workaround, but wanted to share it since I did a lot of searching, youtube, et al (and wasted a lot of time.) My 2008 A6 3.2L had the Adaptive Light Defective message. I bought a replacement...
www.audiworld.com

Is this worth considering at all, or does it read like nonsense? :p
 
   #20  
DV52

DV52

Verified VCDS User
Verified
Joined
May 16, 2014
Messages
5,469
Reaction score
5,935
Location
Melbourne, Australia
VCDS Serial number
C?ID=194404
P1xellat3d said:
@DV52 Don, nothing has been changed for 55-Headlight Range. Is there something I should have done? A quick scan of hex55 module reveals the following:
Click to expand...

Kev:This is the CAN network diagram for modules that control the headlight lamps for HID fittings

R6tvpt9.png


To explain: J533 and J745 is the what VCDS calls the CAN Gateway module (@hex19) and the Headlight Range module (@hex55) respectively. There are 3 x interesting observations from the simple diagram above; the central dominance of the hex55 module, the absence of the BCM and the presence of a separate AFS CAN bus. The VW material states the following:
The cornering light CAN bus AFS (Advanced Front Lighting System) is a separate network which is subordinate to the extended CAN bus. It is connected to the extended CAN bus via the control unit for cornering light and headlight range control J745. The extended CAN bus is also used for communicating routine headlight system control processes to the external control units which are required, for example, for implementing the dynamic light assist function.​
What this means in your car (I think) is that the error on the center screen in your picture is caused by the now superfluous hex55 module (because it no longer can talk to J667 and J668 - both of which are modules that were integrated into the old headlight fittings)

So, and again I'm guessing -I suspect that it might be necessary to kill the hex55 module. Probably the easiest way to do this is to pull the 26 x pin connector because pulling SC35 fuse will also deactivate other stuff. And in addition, it will be necessary to remove the hex55 module from the Gateway installation list

Don

PS:hmm....... according to the Australian Design Rules (ADRs), a self-leveling system and headlight washers are mandatory for any headlamps producing over 2,000 lumens. Now, I'm not sure about the light levels for the new headlights, but it might be worth considering this requirement should the car be involved in an accident and the other driver claims that the vehicle is not road legal!!
 
Last edited:
You must log in or register to reply here.
Back
Top