Coding Battery

GE90 · Aug 6, 2020

Hi All

I am coding my replacement battery on my 2015 Golf GTI. It is an AGM battery - do I use Binary AGM or Fleece?

Thanks very much.

Boki Ar · Aug 6, 2020

I hope answer is here:

Of course, always is better with Auto-Scan.

GE90 · Aug 6, 2020

Thanks very much. However, this is not covered in the video......

Thanks

Jacek · Aug 6, 2020

Hi. It is discussed in this video, watch from 4 minutes and 45 seconds.

GE90 · Aug 6, 2020

Unfortunately it does not cover the Technology Chanel that should be set - i.e. AGM etc.

Uwe · Aug 6, 2020

I believe "Fleece" is the appropriate setting for a standard AGM.

-Uwe-

Jacek · Aug 6, 2020

Address 19, channel IDE03256-MAS06105-Battery matching-Battery rated capacity

Address 19, channel IDE03256-MAS06106-Battery matching-Battery technology

GE90 · Aug 6, 2020

Uwe said:
I believe "Fleece" is the appropriate setting for a standard AGM.

-Uwe-

Thanks very much - can I ask why this is the case please?

NEtech · Aug 6, 2020

As far as I can find, "Binary AGM" is not used yet.

In my opinion it is for the future.
If you buy a brand new CAN Gateway (for an Golf 8), it is coded 130 Ah Battery and "Binary AGM".
And a brand new Controller, is often coded for max. equipment.

Uwe · Aug 6, 2020

GE90 said:
Thanks very much - can I ask why this is the case please?

My understanding is that's the terminology used by German battery manufacturers for normal AGM batteries.

-Uwe-

Coding Battery

GE90

Verified VCDS User

Boki Ar

VCDS Distributor

GE90

Verified VCDS User

Jacek

Verified VCDS User

GE90

Verified VCDS User

Uwe

Benevolent Dictator

Jacek

Verified VCDS User

GE90

Verified VCDS User

NEtech

VCDS Distributor

Uwe

Benevolent Dictator