A4 / S4 Cabriolet Top Operation thread

Status
Not open for further replies.
   #1  

Jef

Ross-Tech Employee
Staff member
Ross-Tech Employee
Joined
Jan 29, 2014
Messages
3,966
Reaction score
6,347
Location
HQ
Finally done with this... 11 years after Audi stopped selling the car.:rolleyes:



These are slides from the video that covers switch locations and conditions of operation:


AKJptMp.png

Field 2, first 3 bits are virtual switches based on data from the G356 sensor shows in Field 4.

xO7EC7q.png


b52hyMt.png

For cars in the North American Region, most likely will have both F170 and F172 switches wired up in series.

p9iDAKl.png


rE4pNjh.png


N9w7beT.png

Think of the F202 as more of a "top out of storage compartment" switch... this photo clearly shows the top is not fully closed.

iZlsoae.png


XuibUKQ.png

If this bit isn't 1, then the top can't operate. It lets the module know that there is room for the top to be stored. Remove crap from trunk area or damage will occur!

5hC37rt.png


cmcb2tB.png


KSCctUA.png


sWO5fws.png


5di9Ia3.png


zKxzRnZ.png



For more information on the A4 / S4 Cabriolet, please refer to Audi Self Study Program (SSP) 991203

This thread has some information on the G356. ===> Case study: 01986 - Convertible Top Frame Position Sensor (G356)

Audi A4 (8H) Automatic Roof wiki page
 
Last edited:
  • Like
Reactions: Uwe
   #2  

Jef

Ross-Tech Employee
Staff member
Ross-Tech Employee
Joined
Jan 29, 2014
Messages
3,966
Reaction score
6,347
Location
HQ
Last edited:
  • Like
Reactions: Uwe
Status
Not open for further replies.
Back
Top