2014 Jetta Sportwagen 2.5 ABS Long coding (MK60EC1)

Address 03: ABS Brakes (J104) Labels:. 1K0-907-379-60EC1F.clb
Part No SW: 1K0 907 379 BS HW: 1K0 907 379 BS
Component: ESP MK60EC1 H46 0166
Revision: 00H46001

Click to expand...

Coding: 00000000092300FE001400E79020000000000000 LHD DECODED VIN WITHOUT ATTRIBUTES NOT YOUR COMPLETE CODING
Coding: 0000000000000000000000000000000000000000
Coding: 114B400C492300FE881402E792200041A1000022 DANA



So why you still trying to code the BS if the BM is installed and you have the correct module?

Hmm, the coding lengths are a match (20 Bytes / 40 digits):

114B400C492300FE881402E792200041A1000022
0000000000000000000000000000000000000000

The module should accept coding even is if isn't bolted in. Please make sure you didn't pick up a space at the end or lose a digit in the copy/paste process.

Dana said:

Hmm, the coding lengths are a match (20 Bytes / 40 digits):

114B400C492300FE881402E792200041A1000022
0000000000000000000000000000000000000000

The module should accept coding even is if isn't bolted in. Please make sure you didn't pick up a space at the end or lose a digit in the copy/paste process.

Click to expand...

Got it to work that time! Thanks!!

It is not letting me adjust the lateral and longitudinal acceleration sensor. G251 and G200 otherwise it’s working. Is that because this car is not equipped? Possible coding issue?

Disregard, I had set the abs pump level in the engine bay but it had fallen to the side a bit. Once I corrected the angle it was sitting all is well!!

Thank you Dana!!!