Hi all, first post on here, go easy with me!
Car has come to me from another garage, v157 fault code, ignition based, it’s had a new flap motor already, loom checks out good and an overlay loom tried too. I’ve had the ecu tested (ok apparently, though I’m questioning it) fuses all good, am I missing something glaringly obvious? anyone had this before? Thanks
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 20.4.1.0 (x64) HEX-NET CB: 0.4508.4
Data version: 20200331 DS317.0
www.Ross-Tech.com
VIN: WAUZZZ8E38A127197 License Plate:
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Address 01: Engine Labels: 03G-906-018-BRD.clb
Control Module Part Number: 03G 906 018 AQ HW: 03G 906 018 AQ
Component and/or Version: R4 2.0l PPD1.3 9888
Software Coding: 0000072
Work Shop Code: WSC 66565 257 00032
VCID: 74A4F7B017EF29261F-8020
1 Fault Found:
012545 - Motor for Intake Manifold Flap (V157)
P3101 - 009 - Open or Short to Ground
Freeze Frame:
Fault Status: 01010100
Fault Priority: 1
Fault Frequency: 1
Reset counter: 40
Mileage: 0 km
Time Indication: 0
Freeze Frame:
RPM: 0 /min
Torque: 0.0 Nm
Speed: 0.0 km/h
0.00 %
Voltage: 11.41 V
Torque: 1016.0 Nm
Torque: 0.0 Nm
Readiness: N/A
Car has come to me from another garage, v157 fault code, ignition based, it’s had a new flap motor already, loom checks out good and an overlay loom tried too. I’ve had the ecu tested (ok apparently, though I’m questioning it) fuses all good, am I missing something glaringly obvious? anyone had this before? Thanks
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 20.4.1.0 (x64) HEX-NET CB: 0.4508.4
Data version: 20200331 DS317.0
www.Ross-Tech.com
VIN: WAUZZZ8E38A127197 License Plate:
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Address 01: Engine Labels: 03G-906-018-BRD.clb
Control Module Part Number: 03G 906 018 AQ HW: 03G 906 018 AQ
Component and/or Version: R4 2.0l PPD1.3 9888
Software Coding: 0000072
Work Shop Code: WSC 66565 257 00032
VCID: 74A4F7B017EF29261F-8020
1 Fault Found:
012545 - Motor for Intake Manifold Flap (V157)
P3101 - 009 - Open or Short to Ground
Freeze Frame:
Fault Status: 01010100
Fault Priority: 1
Fault Frequency: 1
Reset counter: 40
Mileage: 0 km
Time Indication: 0
Freeze Frame:
RPM: 0 /min
Torque: 0.0 Nm
Speed: 0.0 km/h
0.00 %
Voltage: 11.41 V
Torque: 1016.0 Nm
Torque: 0.0 Nm
Readiness: N/A