Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18

Thread: Golf V plus 2008 steering adaptation fault.

  1. #11
    Verified VCDS User
    Join Date
    Oct 2019
    Location
    England
    Posts
    11
    Post Thanks / Like
    Thanks for replies.

    We have already replaced the ABS controller and ESP sensor (located under drivers seat/carpet), checked all wiring etc
    We have graphed all speed sensors in MVB and all are OK.
    Tried again numerous times to carry out the basic settings. No luck.???

  2. #12
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    19,874
    Post Thanks / Like
    Did you change the ignition switch yet & mini harness?
    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic! No Written record, AUTO-SCAN or Appointment = NO HELP!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email or call facility for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  3. #13
    Verified VCDS User
    Join Date
    Oct 2019
    Location
    England
    Posts
    11
    Post Thanks / Like
    Hi Jack

    Yes the ignition switch was replaced first off. All the ignition errors have been erased.
    We have also replaced the the G85 angle sensor with a new genuine part. The steering rack assy has been replaced with a re manufactured unit from WPS.
    The ESP sensor , ABS module and steering column module have also been replaced but with good used parts.
    Checked and double checked all wiring harness and ground points.
    Still no joy with basic settings.

    Can someone tell me. Is it possible to complete brake system test whilst still having error codes in the (44) steering module ?? Seem to be getting conflicting answers to this question.
    Some say it can be done, whilst others are saying that you have to erase all error codes first.??

  4. #14
    Verified VCDS User
    Join Date
    Mar 2019
    Location
    Poland
    Posts
    63
    Post Thanks / Like
    Disabling abs / esp. road test
    -04 basic settings
    - channel 103 off
    - exit with abs and ok

  5. Likes Uwe liked this post
  6. #15
    Verified VCDS User
    Join Date
    Oct 2019
    Location
    England
    Posts
    11
    Post Thanks / Like
    I will give that a try and let you know how it goes.

    Many thanks Jacek

  7. #16
    Verified VCDS User
    Join Date
    Oct 2019
    Location
    England
    Posts
    11
    Post Thanks / Like
    Update.
    We were successful in carrying out what was explained by Jacek. No more ABS warning lamp. Many thanks for that.
    So again we tried to carry out basic settings for G85 steering angle sensor. Still not able to carry this out.
    When viewing MVB060 in 03 Brake electronics is says OK for adjustment but still says steering angle not initialized?
    We have tried all manner of driving styles, still not successful.

  8. #17
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    19,874
    Post Thanks / Like
    SAS and all faults must be corrected and test adaption commenced in 0x44 first and then 0x03 and it must all be done in same ignition switch session!
    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic! No Written record, AUTO-SCAN or Appointment = NO HELP!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email or call facility for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  9. Likes downtime liked this post
  10. #18
    Verified VCDS User
    Join Date
    Oct 2019
    Location
    England
    Posts
    11
    Post Thanks / Like
    Thanks Jack.

    We will continue to try and carry out the adaptations.
    We will update later

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •