Hey guys, I have a Polo 6R TDI blue motion with BCM:6R0 937 088F.I have programmed BiXenon and cruise control on this BCM and it works.I have putted a multifunction steering wheel from Polo GTi,but I haven't achieved to make it work right...On the left side the only button's that work are volume up, volume down and pause.On the right side none of the buttons work.Also the red leds work to both sides. Is this module the ideal to program it or not?Let me know if has someone done this particular retrofit.... Thanks....
POLO 6R RETROFIT MULTIFUNCTION STEERING WHEEL
- Thread starter jettabill
- Start date
- Joined
- Aug 10, 2016
- Messages
- 3,759
- Reaction score
- 4,173
- Location
- Netherlands, eastern part
- VCDS Serial number
- C?ID=284912
I did. Do you have an autoscan?
Yes I do....this is my long code of module:24-B0-2B-BF-08-A1-00-00-08-38-0E-91-6E-6B-0C-D0-FF-C0-67-CF-7E-85-10-41-20-00-00-00-00-00. Which byte-s do you think I have to change? Is there anything else that I have to change? extra wires maybe? Thanks for your interest!
- Joined
- Aug 10, 2016
- Messages
- 3,759
- Reaction score
- 4,173
- Location
- Netherlands, eastern part
- VCDS Serial number
- C?ID=284912
That's not an autoscan. Please post one. See below how to post one.
Code:
Removed. Data from a clone/pirate copy of VCDS is not acceptable here.
Last edited by a moderator:
- Joined
- Dec 16, 2014
- Messages
- 7,975
- Reaction score
- 7,812
- Location
- Westbury, UK
- VCDS Serial number
- C?ID=1423
Do you mean that I have an old version?Maybe I can find a newer one....is that necessary?
- Joined
- Dec 16, 2014
- Messages
- 7,975
- Reaction score
- 7,812
- Location
- Westbury, UK
- VCDS Serial number
- C?ID=1423
Yes, you should download the latest English version from the Ross-Tech website and use that
https://www.ross-tech.com/vcds/download/current.php
- Joined
- Aug 10, 2016
- Messages
- 3,759
- Reaction score
- 4,173
- Location
- Netherlands, eastern part
- VCDS Serial number
- C?ID=284912
Come on dude. Seriously. 12.12...
ok guys....just give me some time....yes my vcds is old and I was using it just to delete some error's...
- Joined
- Dec 16, 2014
- Messages
- 7,975
- Reaction score
- 7,812
- Location
- Westbury, UK
- VCDS Serial number
- C?ID=1423
8 YEARS old is silly, especially as updates to owners of genuine Ross-Tech cables are free for as long as your own the cable - so there really is no good reason to not keep your VCDS updated
Getting help in this forum requires the use of a legitimate VCDS system.
They are available directly from us:
https://store.ross-tech.com/shop/cat/VCDS
... Or from any of our authorized resellers:
http://www.ross-tech.com/distributors.php
Let us know if/when you get one and we'll adjust your forum status.
-Uwe-
Hi again....a friend of mine helped me and this is auto scan of a newer version.Can we do something with it?
Code:
Removed. Data from a clone/pirate copy of VCDS is not acceptable
Last edited by a moderator: