Results 1 to 6 of 6

Thread: Start no run very well. T5 Transporter engine code BNZ 2.5 five cylinder

  1. #1
    Verified VCDS User johne's Avatar
    Join Date
    Mar 2020
    Location
    Southampton, UK
    Posts
    21
    Post Thanks / Like

    Start no run very well. T5 Transporter engine code BNZ 2.5 five cylinder

    Hi All. Symptoms starts fine from cold and revs up fine but when warm you have to keep the key on until it catches very sluggish from rest, you have to wait for the turbo to spool up and off we go runs ok.

    Did have a 000833 - Camshaft Position Sensor (G40) P0341 - 000 - Implausible Signal.. before i striped and retimeed the cam. any idea what 48.0 Start Synchronisation means ??

    so far.
    new moo valve
    rebuild turbo {not by me}

    Many thanks for sharing my problems. john {jack iam ok for soup}

    Code:
    Address 01: Engine  (070 906 016 DS)
    
    11:18:51 Group 004: Unit Injector
      798 /min  Engine Speed (G28)
      3.1 BTDC  Injection Start (specified)
      7.7KW  Injection Duration (specified)
      -6.9KW  Torsion Value 
    
    11:18:51 Group 013: Idle Stabilization (Injection Quantity Deviation - Cylinder 1-4)
      2.16 mg/str  Injection Quantity Deviation Cyl. 1
      0.92 mg/str  Injection Quantity Deviation Cyl. 2
      -0.31 mg/str  Injection Quantity Deviation Cyl. 3
      -0.64 mg/str  Injection Quantity Deviation Cyl. 4
    
    11:18:51 Group 051: Speed Recording
      798 /min  Engine Speed (G28)
      399 /min  Camshaft Speed
      48.0  Start Synchronisation
      00010000  Inject. Sequence Shut-Off Status
    Code:
    Wednesday,08,April,2020,11:54:18:62543
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
    VCDS Version: 20.4.0.1 (x64)  HEX-V2 CB: 0.4508.4
    Data version: 20200331 DS317.0
    www.Ross-Tech.com
    
    
    VIN: WV2ZZZ7HZ8H015277   License Plate: HKOI
    Mileage: 496720km-308647mi   Repair Order: 8/5/20
    
    
    Chassis Type: 7H (7H - VW Transporter/Multivan (2003 > 2010))
    Scan: 01 02 03 08 09 0B 0D 15 16 17 18 19 1C 22 2D 37 45 46 47 56
              57 6E 76 77 78 7D
     
    VIN: WV2ZZZ7HZ8H015277   Mileage: 496720km-308647miles
    -------------------------------------------------------------------------------
    Address 01: Engine        Labels: 070-906-016-BPC.clb
       Part No SW: 070 906 016 DS    HW: 070 906 016 DS
       Component: R5 2,5L EDC  000SG  1585  
       Revision: --H05---    Serial number: VWZ7Z0G5463049
       Coding: 0001072
       Shop #: WSC 80093 222 69422
       VCID: 6491AC44A244FBDBD7A-5184
    
    1 Fault Found:
    008581 - Engine Coolant Temp Sensor on Radiator Outlet (G83) 
                   P2185 - 000 - Signal too High
                 Freeze Frame:
                        Fault Status: 01100000
                        Fault Priority: 3
                        Fault Frequency: 1
                        Reset counter: 255
                        Mileage: 496720 km
                        Time Indication: 0
    
                 Freeze Frame:
                        RPM: 777 /min
                        Speed: 0.0 km/h
                        Load: 0.0 %
                        Voltage: 14.36 V
                        Bin. Bits: 00000000
                        Temperature: 66.6C
                        Temperature: 55.8C
    
    Readiness: 0 0 0 0 1 
    
    -------------------------------------------------------------------------------
    Address 03: ABS Brakes        Labels:. 7H0-907-37x-ABS.clb
       Part No SW: 7H0 907 379 S    HW: 7H0 907 379 S
       Component: (M)ABS MK25E        0103  
       Revision: 00H21001    
       Coding: 0000552
       Shop #: WSC 02756 790 00000
       VCID: 45D751C009BEA2D3204-5160
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 08: Auto HVAC        Labels: Redir Fail!
       Part No: 7H0 820 045 AL
       Component: CLIMA/AC            0303  
       Shop #: WSC 00000 000 00000
       VCID: 6FBBD3687B824883BA8-5160
    
    1 Fault Found:
    00229 - Refrigerant Pressure 
                002 - Lower Limit Exceeded
    
    -------------------------------------------------------------------------------
    Address 09: Cent. Elect.        Labels:. 7H0-937-049.lbl
       Part No: 7H0 937 049 T
       Component: BORDNETZ SGVER 1.0  2001  
       Coding: 0000101
       Shop #: WSC 02756 790 00000
       VCID: 43D34FD8078A9CE30E0-513C
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 15: Airbags        Labels: 6Q0-909-605-VW5.lbl
       Part No: 1C0 909 605 A
       Component: 3C AIRBAG VW51      0010  
       Coding: 13123
       Shop #: WSC 02756  
       VCID: 221DEA5CFDD0B5EB656-513C
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 17: Instruments        Labels: 7Hx-920-xxx-17.lbl
       Part No: 7H0 920 951 T
       Component: KOMBI+WEGFAHRSP VDO V02  
       Coding: 00413
       Shop #: WSC 77824  
       VCID: 3D273920646EEA13784-513C
       WV2ZZZ7HZ8H015277     VWZ7Z0G5463049
    
    1 Fault Found:
    01304 - Radio 
                49-00 - No Communications
    
    -------------------------------------------------------------------------------
    Address 18: Aux. Heat        Labels: 7H0-819-008.lbl
       Part No: 7H0 815 071 F
       Component: Standheizung        0209  
       Shop #: WSC 00000 000 00000
       VCID: 2B0307788F1A74A3D60-513C
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 19: CAN Gateway        Labels: 6N0-909-901-19.lbl
       Part No: 6N0 909 901 
       Component: Gateway K<->CAN    0001  
       Coding: 00006
       Shop #: WSC 02756  
       VCID: 70B9D01463BC577BA32-513C
    
    1 Fault Found:
    01304 - Radio 
                49-00 - No Communications
    
    -------------------------------------------------------------------------------
    Address 45: Inter. Monitor        Labels: 7Hx-951-171.lbl
       Part No: 7H0 951 171 B
       Component: Innenraumueberw.    2920  
       Coding: 0000022
       Shop #: WSC 02757 790 00000
       VCID: 290FFD7085E666B324C-51CE
    
       Subsystem 1 - Part No: 7H5 951 178 
       Component: Innenraumueberw.    1607
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 46: Central Conv.        Labels: 7H0-959-433.lbl
       Part No: 7H0 959 433 B
       Component: C11 Komfortgert     0004  
       Coding: 00030
       Shop #: WSC 02756  
       VCID: 323D1A1CAD30256B956-4B1E
    
    No fault code found.
    
    End----------(Elapsed Time: 05:48, VBatt start/end: 14.5V/12.4V)-----------
    Last edited by Uwe; 04-08-2020 at 10:26 AM. Reason: CODE tags

  2. #2
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    19,223
    Post Thanks / Like
    Did have a 000833 - Camshaft Position Sensor (G40) P0341 - 000 - Implausible Signal.. before i striped and retimeed the cam. any idea what 48.0 Start Synchronisation means ??

    The RTFB will tell you and how to check belt timing since appears out is that right?


    Pardon me retarded........

    -6.9KW Torsion Value
    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic! No Written record, AUTO-SCAN or Appointment = NO HELP!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email or call facility for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  3. #3
    Verified VCDS User johne's Avatar
    Join Date
    Mar 2020
    Location
    Southampton, UK
    Posts
    21
    Post Thanks / Like
    Quote Originally Posted by Jack@European_Parts View Post
    The RTFB will tell you and how to check belt timing since appears out is that right?


    Pardon me retarded........
    This engine is gear driven ....so you saying its retarded ?

  4. #4
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    19,223
    Post Thanks / Like
    This engine is gear driven ....so you saying its retarded ?

    Compound run on sentence questions away, with self evident answers okay?

    All depends on you and your observations compared to RTFB, huh?

    Don't you see what I'm asking in general, is that you should query the RTFB and check timing, since that is recent work history right and torsion value is what it is & yes it's gear driven, "gear chain belt" same crap different shovel for cam position & that vehicle isn't in the USA, so criticizing me for information you should already have a baseline on and choose not too, isn't wise when seeking a hand out, well is it?

    You say no free soup needed, well no crackers either........

    The forum is not a substitute for VCDS or RTFB procedures, it is to elaborate on it based on test data, anything contrary in this section would be considered reckless and unqualified as a repair process.


    What are conditions of PD and cam lifters + mechanical's for leak down and lash settings of injector train?
    Last edited by Jack@European_Parts; 04-08-2020 at 09:34 AM.
    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic! No Written record, AUTO-SCAN or Appointment = NO HELP!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email or call facility for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  5. #5
    Verified VCDS User johne's Avatar
    Join Date
    Mar 2020
    Location
    Southampton, UK
    Posts
    21
    Post Thanks / Like
    ...i only meant it being gear driven moving the gear one tooth would i think be more then 6 degrees .

  6. #6
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    19,223
    Post Thanks / Like
    Sorry man I cant guess what you did or didn't do but I can advise that you get the RTFB.
    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic! No Written record, AUTO-SCAN or Appointment = NO HELP!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email or call facility for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •