Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Long Coding Advice for Passat B8 Instruments Control Module 17

  1. #1
    Verified VCDS User
    Join Date
    Mar 2020
    Location
    Australia
    Posts
    16
    Post Thanks / Like

    Long Coding Advice for Passat B8 Instruments Control Module 17

    Hi everyone, thanks in advance to anyone who is able to assist,
    On an auto scan of my car I found that the message "Control Module Incorrectly coded", see below:
    Code:
    Address 17: Instruments (J285)       Labels:| 5G0-920-XXX-17.clb-SRI3
       Part No SW: 3G0 920 751 A    HW: 3G0 920 751 A
       Component: KOMBI         301 6421  
       Coding: 27A401186798000801887B0B1000000000000000
       Shop #: WSC 04174 123 61029
       ASAM Dataset: EV_DashBoardVDDMQBAB 009046
       ROD: EV_DashBoardVDDMQBAB_009_VW37.rod
       VCID: 2313E9B0AB5FE2EFF47-8076
    
    2 Faults Found:
    13636608 - Control Module Incorrectly Coded 
              U1014 00 [009] - -
              Confirmed - Tested Since Memory Clear
                 Freeze Frame:
                        Fault Status: 00000001
                        Fault Priority: 2
                        Fault Frequency: 1
                        Reset counter: 251
                        Mileage: 83672 km
                        Date: 2020.03.29
                        Time: 13:35:54
    
    16776980 - Databus 
              U1121 00 [009] - Missing Message
              [PLA_Status_01 keine Kommunikation]
              Confirmed - Tested Since Memory Clear
                 Freeze Frame:
                        Fault Status: 00000001
                        Fault Priority: 6
                        Fault Frequency: 1
                        Reset counter: 251
                        Mileage: 83672 km
                        Date: 2020.03.29
                        Time: 13:35:54
    QUESTION: Is it safe to change the Long Coding Manually for this module back to the original pre-fault coding by changing the two different byte codes in the following?:

    Original with No Faults in Instruments Control Module 17
    LONG CODING:
    27 A4 01 18 67 88 00 08 01 88 6B 0B 10 00 00 00 00 00 00 00

    88 Byte 5 10001000


    6B Byte 10 01101011

    Current with two faults as shown above and a different coding for the two items above.

    LONG CODING
    27 A4 01 18 67 98 00 08 01 88 7B 0B 10 00 00 00 00 00 00 00


    98 Byte 5 10011000

    7B Byte 10 01111011
    Last edited by Uwe; 04-05-2020 at 09:41 PM. Reason: INDENT -> CODE

  2. #2
    Verified VCDS User
    Join Date
    Mar 2020
    Location
    USA
    Posts
    53
    Post Thanks / Like
    QUESTION: Is it safe to change the Long Coding Manually for this module back to the original pre-fault coding by changing the two different byte codes in the following?:

    Original with No Faults in Instruments Control Module 17
    LONG CODING:
    27 A4 01 18 67 88 00 08 01 88 6B 0B 10 00 00 00 00 00 00 00

    88 Byte 5 10001000


    6B Byte 10 01101011

    Is the original pre-fault coding that you listed for your own car? If so, what were you trying to achieve by changing byte 5 and byte 10?

    Some more context would help

    Also, please post a full Auto-Scan

    [see this link]
    Last edited by gokarty; 04-05-2020 at 10:28 PM. Reason: fixed link

  3. Likes PetrolDave, Dana liked this post
  4. #3
    Verified VCDS User
    Join Date
    Mar 2020
    Location
    Australia
    Posts
    16
    Post Thanks / Like
    I had originally posted the autoscan in this post https://forums.ross-tech.com/showthr...-Model)-faults

    The pre-fault coding as you put it is in my own car the one that is referred to in the first thread above.

    Context,

    I have only used pre-developed apps for modification of control modules through OBDEleven things like, show remaining fuel, autolock after x seconds when you leave the car taking your keys etc. I can give actual specifics if needed. These apps/adaptations are one click affairs and do not specify the long coding details.

    It appears that the error came about after some of these apps were used and before I used the KUFATEC coding dongle to code for the retrofitted PLA3.0 I added to the car, as to the coding it did I am not sure other than to add the control module and parameters for PLA3.0.

    Cheers
    Andrew

  5. Likes gokarty liked this post
  6. #4
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    27,849
    Post Thanks / Like
    Blog Entries
    1
    There should be no harm in restoring coding values to "factory condition".

    Don't even get me started on "apps" that make coding and adaptation changes to your car without telling you what they are, and without keeping some kind of log of what they actually did.

    -Uwe-
    Lock-down of sick people: Quarantine
    Lock-down of healthy people: Tyranny

  7. #5
    Verified VCDS User
    Join Date
    Mar 2020
    Location
    Australia
    Posts
    16
    Post Thanks / Like
    Hi Uwe,

    Thanks for your advice. One of the reasons I went and purchased your VCDS Hex-V2 interface from the Australian distributor was to get more details on what actually was going on in the car before and after my PLA3.0 retrofit. As you have guessed I had purchased an OBDEleven Pro dongle prior to that and used some of its apps for my model, some worked and some didn't but the details are not explained at the App level. You can see the long coding etc in the interface if you look.

    Basically I decided to look at the Long Coding of the Instruments/Dashboard 17 Control Module as it said the coding was not correct. So I compared the long coding of my backup taken by the OBDEleven and then looked at the Long Coding of Control Module 17 through the various changes I had implemented via Apps and also via the KUFATEC dongle that came with the retrofit.

    The only discrepancy I could find is with those two bytes 88 to 98 and 6B to 7B but I could not find any text or explanation as to what that actually means. Hence my question, if there were not errors in that module when the Long Coding was set to the respective 88 and 6B then I should change them back using VCDS and it should eliminate the incorrectly coded error. Is my logic correct??

  8. Likes Dana liked this post
  9. #6
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    27,849
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by free2beee View Post
    The only discrepancy I could find is with those two bytes 88 to 98 and 6B to 7B but I could not find any text or explanation as to what that actually means. Hence my question, if there were not errors in that module when the Long Coding was set to the respective 88 and 6B then I should change them back using VCDS and it should eliminate the incorrectly coded error. Is my logic correct??
    If it were my car, I would certainly try that.

    -Uwe-
    Lock-down of sick people: Quarantine
    Lock-down of healthy people: Tyranny

  10. Likes Dana liked this post
  11. #7
    Ross-Tech Employee Dana's Avatar
    Join Date
    Jan 2014
    Location
    United States
    Posts
    4,098
    Post Thanks / Like
    I would reuse the entire known factory coding but if I had to take a guess Byte 5, Bit 4 (labeled Park/Steer Assist installed with VCDS) would be more likely than Byte 10, Bit 4 (Display 'Volume to be Replenished). 5/4 does NOT appear to be enabled in other Passat scans with Component: PLA 3.0

  12. Likes Uwe, DV52 liked this post
  13. #8
    Verified VCDS User
    Join Date
    Mar 2020
    Location
    Australia
    Posts
    16
    Post Thanks / Like
    Thanks I will give it a go and report back here. Note we are restricted from driving our cars here due to Covid-19 lockdown so I may not be able to do it and test it for a while.

  14. Likes Dana liked this post
  15. #9
    Verified VCDS User
    Join Date
    Mar 2020
    Location
    Australia
    Posts
    16
    Post Thanks / Like
    Quote Originally Posted by free2beee View Post
    Thanks I will give it a go and report back here. Note we are restricted from driving our cars here due to Covid-19 lockdown so I may not be able to do it and test it for a while.
    Changing Byte 10 back to original did not remove the fault(s)
    I left Byte 5 the same as it concerns PLA Park Assist. It may be that because I added a new control module and connections for PLA3.0 (coded by the Kufatec coding dongle) that this is not expected by the Instruments Control Module.

    I noted also in my look through the modules that many PLA/Park Assist bits were not selected and that RHDrive was selected in some but not other modules. I went through and selected all that I could testing after each coding change. Same errors popped up except in ABS it came up no faults and the faults in reported then popped up in the Central Electrics.
    See below:

    Code:
    Wednesday,15,April,2020,15:38:58:41391
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
    VCDS Version: 20.4.0.1 (x64)  HEX-V2 CB: 0.4508.4
    Data version: 20200331 DS317.0
    www.Ross-Tech.com
    
    
    VIN: WVWZZZ3CZGE1XXXXX   License Plate: 
    
    
    Chassis Type: 3C-VW48 (5Q0)
    Scan: 01 02 03 05 08 09 10 13 15 16 17 19 2B 3C 42 44 52 5F 6C A5
              CF
    
    VIN: WVWZZZ3CZGE1XXXXX   Mileage: 83725km-52024miles
    
    01-Engine -- Status: OK 0000
    02-Auto Trans -- Status: OK 0000
    03-ABS Brakes -- Status: OK 0000
    05-Acc/Start Auth. -- Status: OK 0000
    08-Auto HVAC -- Status: OK 0000
    09-Cent. Elect. -- Status: Malfunction 0010
    10-Park/Steer Assist -- Status: OK 0000
    13-Auto Dist. Reg -- Status: OK 0000
    15-Airbags -- Status: OK 0000
    16-Steering wheel -- Status: OK 0000
    17-Instruments -- Status: Malfunction 0010
    19-CAN Gateway -- Status: OK 0000
    2B-Steer. Col. Lock -- Status: OK 0000
    3C-Lane Change -- Status: OK 0000
    42-Door Elect, Driver -- Status: OK 0000
    44-Steering Assist -- Status: OK 0000
    52-Door Elect, Pass. -- Status: OK 0000
    5F-Information Electr. -- Status: OK 0000
    6C-Back-up Cam. -- Status: OK 0000
    A5-Frt Sens. Drv. Assist -- Status: OK 0000
    CF-Lane Chge Asst 2 -- Status: OK 0000
    -------------------------------------------------------------------------------
    Address 01: Engine (J623-DFCA)       Labels:. 04L-907-309-V1.clb
       Part No SW: 04L 906 026 FN    HW: 04L 907 309 M
       Component: R4 2,0L EDC   H23 1195  
       Revision: B4H23---    
       Coding: 011D0032046505083000
       Shop #: WSC 05311 115 00318
       ASAM Dataset: EV_ECM20TDI01104L906026FN 002001
       ROD: EV_ECM20TDI01104L906026FN_002_VW48.rod
       VCID: 7BA3F1D0736F7A23060-802E
    
    No fault code found.
    Readiness: 0 0 0 0 0 
    
    -------------------------------------------------------------------------------
    Address 02: Auto Trans (J743)       Labels: 0D9-927-770.clb
       Part No SW: 0D9 300 041 J    HW: 02E 927 770 AQ
       Component: DQ250-6F MQB  H53 4906  
       Revision: 06253104    Serial number: TFK01510270727
       Coding: 0014
       Shop #: WSC 05311 115 00089
       ASAM Dataset: EV_TCMDQ250021 001001
       ROD: EV_TCMDQ250021.rod
       VCID: 1F1BE5408737C6034A8-804A
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 03: ABS Brakes (J104)       Labels: 5Q0-907-379-IPB-V1.clb
       Part No SW: 3Q0 907 379 AB    HW: 3Q0 907 379 G
       Component: ESC           H42 0723  
       Revision: 00000000    Serial number: 63185000000703
       Coding: 0EEC928F34230B6E077A060041C64970492CD0E0608292F51862F03AC2A9
       Shop #: WSC 17873 123 50804
       ASAM Dataset: EV_Brake1UDSContiMK100IPB 034036
       ROD: EV_Brake1UDSContiMK100IPB_034.rod
       VCID: 7AADF4D47C55432B1D6-802E
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 05: Acc/Start Auth. (J518)       Labels:| 5Q0-959-435.clb
       Part No SW: 3Q0 959 435 C    HW: 3Q0 959 435 C
       Component: VWKESSYMQB    036 0710  
       Revision: 00036000    Serial number: 0385786377
       Coding: 0F00100F03
       Shop #: WSC 04174 123 61029
       ASAM Dataset: EV_KessyHellaMQBAB 004032
       ROD: EV_KessyHellaMQBAB.rod
       VCID: 3A2D34D43CD5832B5D6-806E
    
       Sensor Controlled Power Rear Lid: 
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 08: Auto HVAC (J255)       Labels:| 5G0-907-044.clb
       Part No SW: 5G0 907 044 BG    HW: 5G0 907 044 BG
       Component: Climatronic   H04 1202  
       Revision: 00001K10    
       Coding: 1112010430210000111550401210180A
       Shop #: WSC 04174 123 61029
       ASAM Dataset: EV_ACClimaBHBVW37X 005137
       ROD: EV_ACClimaBHBVW37X_005_VW37.rod
       VCID: 6D87CF883D1BE493884-8038
    
       Fresh Air Blower Front: 
    
       Geber f¸r K‰ltemitteldruck/K‰ltemitteltemperatur: 
    
       Air quality sensor: 
    
       Relative humidity sensor in fresh air intake duct: 
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 09: Cent. Elect. (J519)       Labels:| 5Q0-937-08X-MV1.clb
       Part No SW: 5Q0 937 086 AJ    HW: 5Q0 937 086 AJ
       Component: BCM PQ37BOSCH 028 0162  
       Revision: --------    Serial number: 86581111151510
       Coding: 03011B46C2C102FF07A04094B11007281880000000000000000000000000
       Shop #: WSC 04174 123 61029
       ASAM Dataset: EV_BodyContrModul1UDSBosc 015002
       ROD: EV_BCMBOSCH_015.rod
       VCID: 025D8C3414850BEB456-8056
    
       Control Unit For Wiper Motor: 
       Subsystem 1 - Part No SW: 3G2 955 119 A    HW: 3G1 955 119   Labels: 5QX-955-119-V1.CLB
       Component: WWS    150801  043 0607 
       Serial number:         150930150330
       Coding: 0E4DDD
    
       Rain Light Recognition Sensor: 
       Subsystem 2 - Part No SW: 5Q0 955 547 A    HW: 5Q0 955 547 A  Labels: 5Q0-955-547.CLB
       Component: RLHS  037 0059 
       Serial number: S4Y15M11D19H15M36S17
       Coding: 90A8DD
    
       Light switch: 
       Subsystem 3 - Part No SW: 3G0 941 633     HW: 3G0 941 633 
       Component: E1 - LDS MQB  H01 0032 
       Serial number: 15 06 2015  10000699
    
       Sensor For Anti Theft Alarm System: 
       Subsystem 4 - Part No SW: 5Q0 951 172     HW: 5Q0 951 172 
       Component: Sensor, DWA  005 0316 
       Serial number: 000000000ZY1527208K0
    
       Alarm horn: 
       Subsystem 5 - Part No SW: 5Q0 951 605 A    HW: 5Q0 951 605 A
       Component: Sirene, DWA  005 0312 
       Serial number: 00000000000033891458
    
       Relative Air Humidity Interior Sender: 
    
    1 Fault Found:
    540693 - Databus 
              U1121 00 [009] - Missing Message
              Confirmed - Tested Since Memory Clear
                 Freeze Frame:
                        Fault Status: 00000001
                        Fault Priority: 6
                        Fault Frequency: 1
                        Reset counter: 254
                        Mileage: 83725 km
                        Date: 2020.04.15
                        Time: 15:35:39
    
    
    -------------------------------------------------------------------------------
    Address 10: Park/Steer Assist (J791)       Labels:| 5Q0-919-298.clb
       Part No SW: 5QA 919 298 C    HW: 5QA 919 298 A
       Component: PLA 3.0 12KH07 0045  
       Serial number: 000308417618339
       Coding: 0371167851
       Shop #: WSC 04174 123 61029
       ASAM Dataset: EV_EPHVA2CAU3700000 009037
       ROD: EV_EPHVA2CAU3700000_009_VW37.rod
       VCID: 50F9767C8A69297B832-8004
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 13: Auto Dist. Reg (J428)       Labels:| 3Q0-907-572.clb
       Part No SW: 3Q0 907 572 B    HW: 3Q0 907 572 B
       Component: ACC BOSCH MQB H04 0192  
       Coding: 320467D251FFC728949C804D
       Shop #: WSC 04174 123 61029
       ASAM Dataset: EV_ACCBOSCHVW48X 001008
       ROD: EV_ACCBOSCHVW48X.rod
       VCID: 34311AEC1EB1755B87A-8060
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 15: Airbags (J234)       Labels:| 5Q0-959-655.clb
       Part No SW: 3Q0 959 655 BB    HW: 3Q0 959 655 BB
       Component: Airbag VW20   013 0195  
       Revision: --------    Serial number: 003STPPAKVGF
       Coding: 98FCC0C0000000005C540000008800000065
       Shop #: WSC 05314 000 00001
       ASAM Dataset: EV_AirbaVW20TS6VW48X 001116
       ROD: EV_AirbaVW20TS6VW48X.rod
       VCID: 7F5B05C0677766032A8-802A
    
       Side Sensor Driver Front: 
       Subsystem 1 - Part No SW: -----------    HW: 454 000 111 15
       Component: SideSensor_Df  008 0887 
       Serial number: 3576U00000065689971G
       Coding: 2D2D2D
    
       Side Sensor Passenger Front: 
       Subsystem 2 - Part No SW: -----------    HW: 454 000 111 15
       Component: SideSensor_Pf  008 0887 
       Serial number: 3586U000000ED489971V
       Coding: 2D2D2D
    
       Side Sensor Driver Rear: 
       Subsystem 3 - Part No SW: -----------    HW: 454 800 211 15
       Component: SideSensor_Dr  301 0148 
       Serial number: 3516R5962C5080000003
       Coding: 2D2D2D
    
       Side Sensor Passenger Rear: 
       Subsystem 4 - Part No SW: -----------    HW: 454 802 410 15
       Component: SideSensor_Pr  301 0148 
       Serial number: 3526R6E93BC08000000K
       Coding: 2D2D2D
    
       Front Sensor Driver: 
       Subsystem 5 - Part No SW: -----------    HW: 454 801 610 15
       Component: FrontSensor_D  304 0149 
       Serial number: 3556V18CCC108000000I
       Coding: 2D2D2D
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 16: Steering wheel (J524)       Labels:| 5Q0-953-549.clb
       Part No SW: 3Q0 953 521 B    HW: 5Q0 953 569 A
       Component: Lenks.Modul   075 0195  
       Revision: FF033033    Serial number: 20151021400459
       Coding: 0810
       Shop #: WSC 00015 115 00001
       ASAM Dataset: EV_SMLSVALEOMQB 001015
       ROD: EV_SMLSVALEOMQB.rod
       VCID: 2F3B1580F7975683FA8-807A
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 17: Instruments (J285)       Labels:| 5G0-920-XXX-17.clb-SRI3
       Part No SW: 3G0 920 751 A    HW: 3G0 920 751 A
       Component: KOMBI         301 6421  
       Coding: 27A401186798000801886B0B1000000000000000
       Shop #: WSC 04174 123 61029
       ASAM Dataset: EV_DashBoardVDDMQBAB 009046
       ROD: EV_DashBoardVDDMQBAB_009_VW37.rod
       VCID: 2313E9B0AB5FE2E36E0-8076
    
    2 Faults Found:
    13636608 - Control Module Incorrectly Coded 
              U1014 00 [009] - -
              Confirmed - Tested Since Memory Clear
                 Freeze Frame:
                        Fault Status: 00000001
                        Fault Priority: 2
                        Fault Frequency: 1
                        Reset counter: 254
                        Mileage: 83725 km
                        Date: 2020.04.15
                        Time: 15:36:39
    
    16776980 - Databus 
              U1121 00 [009] - Missing Message
              [PLA_Status_01 keine Kommunikation]
              Confirmed - Tested Since Memory Clear
                 Freeze Frame:
                        Fault Status: 00000001
                        Fault Priority: 6
                        Fault Frequency: 1
                        Reset counter: 254
                        Mileage: 83725 km
                        Date: 2020.04.15
                        Time: 15:36:39
    
    
    -------------------------------------------------------------------------------
    Address 19: CAN Gateway (J533)       Labels:| 5Q0-907-530-V1.clb
       Part No SW: 5Q0 907 530 AJ    HW: 5Q0 907 530 M
       Component: GW MQB High   212 2246  
       Revision: --------    Serial number: 09111510800334
       Coding: 030300345F087300FB0002581C0F00010001070000000000000000000000
       Shop #: WSC 05311 115 00089
       ASAM Dataset: EV_GatewConti 013020
       ROD: EV_GatewConti_013.rod
       VCID: 79AFEBD87953483314C-802C
    
       Alternator: 
    
       Multi Function Steering Wheel Control Module: 
       Subsystem 2 - Part No SW: 5G0 959 442 K    HW: 5G0 959 442 K  Labels: 3C8-959-537.CLB
       Component: E221__MFL-DC1  H17 0040 
       Serial number: 29150002186110075451
       Coding: 2CFFFF
    
       Battery Monitoring Control Module: 
       Subsystem 3 - Part No SW: 5Q0 915 181 G    HW: 5Q0 915 181 G
       Component: J367-BDMHella  H04 8050 
       Serial number: 1488858203          
    
       Analog clock: 
       Subsystem 4 - Part No SW: 3G0 919 204 C    HW: 3G0 919 204 C
       Component: Analoguhr  209 2002 
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 2B: Steer. Col. Lock (J764)       Labels:* 5Q0-905-861.clb
       Part No SW: 3Q0 905 861     HW: 3Q0 905 861 
       Component: ELV-MQBB      H05 0032  
       Serial number: 15000154107005
       Coding: 0800000000000000
       Shop #: WSC 05311 115 00089
       ASAM Dataset: EV_ELVMarquMQBB 001007
       ROD: EV_ELVMarquMQBB.rod
       VCID: 71BFD3F821230073ACC-8024
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 3C: Lane Change (J769)       Labels:| 3Q0-907-566.clb
       Part No SW: 3Q0 907 566 B    HW: 3Q0 907 566 
       Component: MRR1Rear      H16 0230  
       Revision: --------    
       Coding: 44C002
       Shop #: WSC 05311 115 00089
       ASAM Dataset: EV_RearRadarS1BoschVW48X 001002
       ROD: EV_RearRadarS1BoschVW48X.rod
       VCID: 372B2DE00FC79E43A28-8062
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 42: Door Elect, Driver (J386)       Labels:| 5QX-959-X93-42.clb
       Part No SW: 5Q0 959 593 E    HW: 5Q0 959 593 B
       Component: TSG FS        020 0041  
       Serial number: 220815BHM11588
       Coding: 00351A208001020000000000
       Shop #: WSC 131071 1023 2097151
       ASAM Dataset: EV_DCUDriveSideEWMAXKLO 006003
       ROD: EV_DCUDriveSideEWMAXCONT.rod
       VCID: 43D349304B1FC2E30E0-8016
    
       Drivers Door Rear Control Module: 
       Subsystem 1 - Part No SW: 5Q4 959 811 E    HW: 5Q4 959 811 E  Labels: 5QX-959-81X-V1.CLB
       Component: Fond FHSG DRV  007 0002 
       Serial number: 00000000000002557486
       Coding: 0D0000
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 44: Steering Assist (J500)       Labels:| 5Q0-909-144.clb
       Part No SW: 5Q0 909 144 S    HW: 5Q0 909 144 R
       Component: EPS_MQB_ZFLS  125 1063  
       Coding: 9303
       Shop #: WSC 05311 115 00089
       ASAM Dataset: EV_SteerAssisMQB 012140
       ROD: EV_SteerAssisMQB_012_VW37.rod
       VCID: 44D14A2C4E11C5DB37A-8010
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 52: Door Elect, Pass. (J387)       Labels:| 5QX-959-X92-52.clb
       Part No SW: 5Q0 959 592 E    HW: 5Q0 959 592 B
       Component: TSG BFS       020 0041  
       Serial number: 011015BIU19426
       Coding: 003510208001020000000000
       Shop #: WSC 131071 1023 2097151
       ASAM Dataset: EV_DCUPasseSideEWMAXKLO 006003
       ROD: EV_DCUPasseSideEWMAXCONT.rod
       VCID: 42DD4C345405CBEB056-8016
    
       Passengers Rear Door Control Module: 
       Subsystem 1 - Part No SW: 5Q4 959 812 E    HW: 5Q4 959 812 E  Labels: 5QX-959-81X-V1.CLB
       Component: Fond FHSG PSG  007 0002 
       Serial number: 00000000000002560819
       Coding: 050000
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 5F: Information Electr. (J794)       Labels:* None
       Part No SW: 3G0 035 045 G    HW: 3G0 035 045 
       Component: MU-H-N-RW     H50 0343  
       Serial number: A688J0FB000689
       Coding: 02840108FF00000051510001000828001F0204C601200102DF
       Shop #: WSC 04174 123 61029
       ASAM Dataset: EV_MUHig4CGen2HBAS 001001
       ROD: EV_MUHig4CGen2HBAS_VW37.rod
       VCID: 221DECB4B445EBEB656-8076
    
       Operating And Display Unit 1: 
       Subsystem 1 - Part No SW: 5G0 919 606     HW: 5G0 919 606 
       Component: ABT_High  H62 0031 
       Serial number: VWZ8Z9RU30423C      
    
       Data medium: 
       Subsystem 2 - Part No SW: V03 959 806 FQ    HW: -----------
       Component: ROW 2019/2020  --- 0079 
       Serial number: --------------------
    
       Compact Disc Database: 
       Subsystem 3 - Part No SW: V03 959 800 EG    HW: -----------
       Component: Gracenote2  --- 4008 
       Serial number: --------------------
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 6C: Back-up Cam. (J772)       Labels:| 5Q0-980-556.clb
       Part No SW: 5Q0 980 556     HW: 5Q0 980 556 
       Component: RVC Compact   H07 0100  
       Coding: 0184010162002017000040
       Shop #: WSC 05311 000 00197
       ASAM Dataset: EV_CamSysRVRVCPANAMQBAB 005007
       ROD: EV_CamSysRVRVCPANAMQBAB_005.rod
       VCID: 77ABEDE04F475E43628-8022
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address A5: Frt Sens. Drv. Assist (R242)       Labels:| 3Q0-980-65X-A5.clb
       Part No SW: 3Q0 980 654 C    HW: 3Q0 980 654 
       Component: MQB_B_MFK     H04 0023  
       Serial number: 12111511K20116
       Coding: 000408010000010100022346C050410084000E000020
       Shop #: WSC 04174 123 61029
       ASAM Dataset: EV_MFKBoschMQBB 001001
       ROD: EV_MFKBoschMQBB_001_VW36.rod
       VCID: 372B2DE00FC79E43A28-8062
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address CF: Lane Chge Asst 2 (J770)       Labels:. 3Q0-907-566.clb
       Part No SW: 3Q0 907 590 B    HW: 3Q0 907 590 
       Component: MRR1Rear      H16 0230  
       Revision: --------    
       Coding: 44C002
       Shop #: WSC 00000 000 00000
       ASAM Dataset: EV_RearRadarS2BoschVW48X 001002
       ROD: EV_RearRadarS2BoschVW48X.rod
       VCID: 34311AEC1EB1755B87A-8060
    
    No fault code found.
    
    End----------(Elapsed Time: 02:05, VBatt start/end: 12.3V/12.4V)-----------
    Last edited by Uwe; 04-18-2020 at 10:55 AM. Reason: CODE tags

  16. #10
    VCDS Distributor
    Join Date
    Feb 2014
    Location
    Denmark
    Posts
    2,000
    Post Thanks / Like
    Quote Originally Posted by free2beee View Post
    I left Byte 5 the same as it concerns PLA Park Assist. It may be that because I added a new control module and connections for PLA3.0 (coded by the Kufatec coding dongle) that this is not expected by the Instruments Control Module
    Are you 100% sure, that the kufatec dongle changed coding in [17] Byte 5 Bit 4 ?
    Is it kufatec product Item no. 41780-1 you have installed ?
    What manual coding/change with a tester, is explained in kufatec instructions

    Out of 246 Control units I have in Autoscan files with Part Number SW: 3G0 920 7xx, none have this bit active.

    As Dana wrote, I would try to remove Byte 5 Bit 4, then Bus rest etc.
    Is the DTC gone ?

    You can also test coding in [17], Byte 13 Bit 0

  17. Likes Uwe, downtime liked this post

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •