New User Here! I have a problem with my Audi RS4 B7

Hello

I have a problem with My audi RS4 B7 .
I think my Engine I runs richer than engine II and i get sometimes FUEL TRIM TOO RICH fault code and sometimes MIL ON.


This is the Engine I . This video is after i turn off the car after a ride and started after 2 minutes and let it work for 1 minute and then record.
https://www.youtube.com/watch?v=BSn3I_RwOgg


This is the Engine II: Also after i turn off the car after a ride and record it after Engine I the engine temp was on 90 celsius.
https://www.youtube.com/watch?v=OAkh67jK6i0

I know something is wrong and running rich but i'm not sure.

Please ask me what you need to send you to find out what's going on.
And if anyone knows if on block 033 lambda control on WOT what's normal %

NEED YOUR HELP

DINOS

Please post an Auto-Scan for context.

-Uwe-

I have erased the DTC’s so there are zero for engine 1 and engine II.I can send you but there are no fault codes in engine I and II

I’ll try to go out for a ride to see if they come back because of the COVID 19 I can’t go for long rides because police is everywhere

Dinos

Without an autoscan we know nothing about your car, which ecu, software, etc. are fitted. It's not a matter of showing the fault codes, it's more that without knowing what particular setup your car has it's impossible to guess at any fault causes.

Hey i posted the auto scan!

pcrroume10 said:

NEED YOUR HELP

Click to expand...

Getting help in this forum requires the use of a legitimate VCDS system.

They are available directly from us:
https://store.ross-tech.com/shop/cat/VCDS

... Or from any of our authorized resellers:
http://www.ross-tech.com/distributors.php

Let us know if/when you get one and we'll adjust your forum status.

-Uwe-