Page 3 of 3 FirstFirst 123
Results 21 to 27 of 27

Thread: Advanced Measuring Values

  1. #21
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    25,345
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by Smac770 View Post
    Is there no way to dump the list of available measuring values and locations to a text file so it can be reviewed while not in the car with the ignition on?
    Yes, with a current interface you can make maps using Controller Channel Map function found in Applications.

    Quote Originally Posted by Smac770 View Post
    Sorry, another wonder about Adv Meas Values. For a UDS engine module, do the descriptions presented come from the engine module, or from Ross-Tech? Ie, if I find a description confusing, are we all in the same boat of "who knows what the Audi eng was thinking", or would it be a question to Ross-Tech about why they used the text presented?
    The descriptions come from VAG and/or their control module suppliers.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  2. #22
    Verified VCDS User
    Join Date
    Aug 2017
    Location
    UK
    Posts
    14
    Post Thanks / Like
    Ross Tech has included several helpful profiles as well.

    Enjoy.
    Please could someone help locate these files?
    The only ones available are those I've written.
    Last edited by Uwe; 12-07-2018 at 10:16 AM. Reason: Fixed QUOTE tags

  3. #23
    Ross-Tech Employee Dana's Avatar
    Join Date
    Jan 2014
    Location
    United States
    Posts
    3,711
    Post Thanks / Like
    Those are located in C:\Ross-Tech\VCDS\Scaling by default. If you have VCDS installed in another location you'd need to check that folder.

  4. Likes Uwe liked this post
  5. #24
    Verified VCDS User
    Join Date
    Aug 2017
    Location
    UK
    Posts
    14
    Post Thanks / Like
    Thank you for your advice.
    Found files in C:\Ross-Tech\VCDS\Scaling; files do not appear to be available as suggested at the end of Jef's thread #1.
    Assume First number = Group and Second number = Block Number ... certainly much easier than my method of entering each location.
    Also enables interpretation and relationship to Advance Measuring Values examples available on YouTube.
    Regards and Thanks
    Brian.

  6. #25
    Verified VCDS User Adamantos's Avatar
    Join Date
    Oct 2019
    Location
    Greece
    Posts
    7
    Post Thanks / Like
    Is there any way to add more than 12 values to measure? and why is there this limitation?

  7. #26
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    25,345
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by Adamantos View Post
    Is there any way to add more than 12 values to measure? and why is there this limitation?
    No, there isn't.

    The limitation is in part due to the code that was originally written to support three groups measuring blocks, each of which consisted of four items and increasing it was not deemed terribly useful due to the the fact that that the sample rate would drop further the more items are being read.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  8. #27
    VCDS Distributor
    Join Date
    Feb 2014
    Location
    Denmark
    Posts
    1,807
    Post Thanks / Like
    One option, is to use [Controller Channel Map] in [Applications].
    You get all measurement values in a log file.

  9. Likes Uwe, Dana liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •