Results 1 to 5 of 5

Thread: Transport T5 ABS coding problem

  1. #1
    Verified VCDS-User
    Join Date
    Sep 2018
    Location
    Turkey
    Posts
    3
    Post Thanks / Like

    Transport T5 ABS coding problem

    hi

    i have transporter t5 but giving error wrong coding..

    ESP MK25E1

    LOG is attached thnks for helps


    Code:
    Friday,28,February,2020,17:53:38:05288
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x64
    VCDS Version: 19.6.2.2 (x64)  HEX-NET CB: 0.4508.4
    Data version: 20200210 DS308.0
    www.Ross-Tech.com
    
    
    VIN: WV1ZZZ7HZ7H138736   License Plate: T5ABSCOD
    Mileage: 586840km-364645mi   Repair Order: 
    
    
    
    --------------------------------------------------------------------------------
    --------------------------------------------------------------------------------
    
    
    Chassis Type: 7H (7H - VW Transporter/Multivan (2003 > 2010))
    Scan: 01 02 03 08 09 0B 0D 15 16 17 18 19 1C 22 2D 37 45 46 47 56
              57 6E 76 77 78 7D
     
    VIN: WV1ZZZ7HZ7H138736   Mileage: 586840km-364645miles
    -------------------------------------------------------------------------------
    Address 01: Engine        Labels: 038-906-016-AXB.clb
       Part No SW: 038 906 016 N    HW: 028 101 185 5
       Component: R4 1,9L EDC 0000SG  6209  
       Revision: 12345678    Serial number: XXXXXXXXXXXXXX
       Coding: 0151031
       Shop #: WSC 02744 790 00000
       VCID: 9F0E61B74FA9F4B73C-5184
    
    2 Faults Found:
    18044 - Powertrain Data Bus 
                P1636 - 000 - Missing Message from Airbag Controller
                 Freeze Frame:
                        RPM: 0 /min
                        Torque: 106.0 Nm
                        Speed: 0.0 km/h
                        Load: 0.0 %
                        Voltage: 12.16 V
                        Bin. Bits: 00000100
                        Torque: 0.0 Nm
                        Torque: 60.0 Nm
    
    16566 - Fuel Temp. Sensor A (G81) 
                P0182 - 000 - Short to GND
                 Freeze Frame:
                        RPM: 0 /min
                        Torque: 106.0 Nm
                        Speed: 0.0 km/h
                        Load: 0.0 %
                        Voltage: 12.08 V
                        Temperature: 16.2°C
                        Temperature: 31.5°C
                        Temperature: 38.7°C
    
    Readiness: 0 0 X X X 
    
    -------------------------------------------------------------------------------
    Address 03: ABS Brakes        Labels: 7H0-907-37x-ESP.lbl
       Part No SW: 7H0 907 379 R    HW: 7H0 907 379 R
       Component: ESP MK25E1          0104  
       Revision: 00H31001    
       Coding: 0000557
       Shop #: WSC 12345 389 45725
       VCID: C4C4CEDB868FF76F41-5160
    
    1 Fault Found:
    01044 - Control Module Incorrectly Coded 
                003 - Mechanical Failure
                 Freeze Frame:
                        Fault Status: 01100011
                        Fault Priority: 2
                        Fault Frequency: 1
                        Reset counter: 40
                        Mileage: 586844 km
                        Time Indication: 0
    
                 Freeze Frame:
                        Count: 128
                        Count: 4865
                        Count: 199
                        Count: 2049
    
    
    -------------------------------------------------------------------------------
    Address 09: Cent. Elect.        Labels:. 7H0-937-049.lbl
       Part No: 7H0 937 049 T
       Component: BORDNETZ SGVER 1.0  2001  
       Coding: 0000101
       Shop #: WSC 02736 790 00000
       VCID: C3C6CDC78381F05778-5160
    
    2 Faults Found:
    01341 - Control Module in Instrument Panel On Comfort CAN (J285) 
                008 - Implausible Signal
    00538 - Reference Voltage 
                014 - Defective
    
    -------------------------------------------------------------------------------
    Address 17: Instruments        Labels: 7Hx-920-xxx-17.lbl
       Part No: 7H0 920 861 E
       Component: KOMBI+WEGFAHRSP VDO V02  
       Coding: 00103
       Shop #: WSC 00186  
       VCID: AE108C7368036D3F87-5160
       WV1ZZZ7HZ7H138736     VWZ7Z0G5298927
    
    2 Faults Found:
    01321 - Control Module for Airbags (J234) 
                49-00 - No Communications
    01304 - Radio 
                49-00 - No Communications
    
    -------------------------------------------------------------------------------
    Address 19: CAN Gateway        Labels: 6N0-909-901-19.lbl
       Part No: 6N0 909 901 
       Component: Gateway K<->CAN    0001  
       Coding: 00006
       Shop #: WSC 02736  
       VCID: F0AC520BB2B73BCFD5-5160
    
    2 Faults Found:
    01321 - Control Module for Airbags (J234) 
                49-00 - No Communications
    01304 - Radio 
                49-00 - No Communications
    
    -------------------------------------------------------------------------------
    Address 46: Central Conv.        Labels: 7H0-959-433.lbl
       Part No: 7H0 959 433 B
       Component: C11 Komfortgerát     0004  
       Coding: 00025
       Shop #: WSC 02736  
       VCID: B22898037C3B49DFE3-4B1E
    
    No fault code found.
    
    End----------(Elapsed Time: 06:23, VBatt start/end: 12.5V/12.3V)-----------

  2. #2
    Verified VCDS User
    Join Date
    Mar 2019
    Location
    Poland
    Posts
    47
    Post Thanks / Like
    And what happened to 15 airbag?

  3. Likes Dana liked this post
  4. #3
    Ross-Tech Employee Dana's Avatar
    Join Date
    Jan 2014
    Location
    United States
    Posts
    4,096
    Post Thanks / Like
    Providing WV1ZZZ7HZ7H138736 is the correct VIN I believe the 03-ABS coding should be: 0003630

  5. Likes Uwe liked this post
  6. #4
    Verified VCDS-User
    Join Date
    Sep 2018
    Location
    Turkey
    Posts
    3
    Post Thanks / Like
    Quote Originally Posted by Jacek View Post
    And what happened to 15 airbag?
    airbag control module hmmm water damaged .. its faulty.. need change..

    gived 0003630 code accepted but giving same error...

    thnks for help.. i will change airbag control module

  7. Likes Uwe, Dana liked this post
  8. #5
    Ross-Tech Employee Dana's Avatar
    Join Date
    Jan 2014
    Location
    United States
    Posts
    4,096
    Post Thanks / Like
    If it still shows 01044 "Mechanical Failure" after you fix the Airbags please post another scan.

  9. Likes Uwe liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •