Newbie question regarding adaption

   #1  

Znippie

Verified VCDS User
Verified
Joined
May 6, 2018
Messages
39
Reaction score
17
Location
Norway
VCDS Serial number
C?ID=328489
Hi there!
As a last resort, Im now playing the sad violin and creating a thread regarding my issue.
My headlight washers is not working on a car I recently bought, so I thought I would make them work again.
First I tried the output test, and the V11 headlight washerpump is working like a charm.
Then I checked central electrics if the adaption was correct, and it was not.
It was set to 114, god knows why.
Channel 013: Wiper Setup
Standard: 115
+001 = Speed Reset
+002 = Short to Plus Monitoring
+004 = Rain Sensor active
+008 = Long Post Wiping after Washing (Drop/Tear Wiping)
+016 = Speed dependent Wiper interval active
+032 = Headlight Washer System active
+064 = Reverse Gear Wiping active
And here comes my newbie question, since I have been on google for the last 45mins without a relevant thread

To activate the headlight washer system, is the new value:
115 + 32 aka 147 or
115 + 1 + 2 + 4 + 8 + 16 + 32 aka 178 ?


i have tried them both, and neither of them is activating the headlight washerpump.

I dont have a full scan, dont think it will be necessary for this question.
2007 Audi A4 B7 2.0 TDI
 
   #2  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,902
Reaction score
33,621
Location
USA
VCDS Serial number
HC100001
114 = 2 + 16 + 32 + 64. So "+032 = Headlight Washer System active" is already active.

Changing it to 115 would add "Speed Reset". I'm not sure exactly what that is.

178 = 2 + 16 +32 + 128. So that wold drop +064 = Reverse Gear Wiping active, and it would add 128, which is undefined.

-Uwe-
 
   #3  

Znippie

Verified VCDS User
Verified
Joined
May 6, 2018
Messages
39
Reaction score
17
Location
Norway
VCDS Serial number
C?ID=328489
114 = 2 + 16 + 32 + 64. So "+032 = Headlight Washer System active" is already active.

Changing it to 115 would add "Speed Reset". I'm not sure exactly what that is.

178 = 2 + 16 +32 + 128. So that wold drop +064 = Reverse Gear Wiping active, and it would add 128, which is undefined.

-Uwe-

Thanks for the reply.
Unfortunately none of the values you replied with works.
Something else is fishy here, since the pump is working with the output test..
I currently have my front bumper removed, will the control module prevent the headlight washerpump from engaging due to the missing fog lights?
I know that it wont work with dipped headlights etc.
 
Last edited:
Back
Top