Results 1 to 4 of 4

Thread: Dpf regeneration

  1. #1
    Verified VCDS User
    Join Date
    Jan 2020
    Location
    Israel
    Posts
    28
    Post Thanks / Like

    Dpf regeneration

    So I read about dpf regeneration (cleaning) on wiki.ross-tech
    And I read this sentence
    *Particle Filter Load below Specification (see MVB 108.2/3 -or- 241.2/3 VCDS should give the specified values)*
    But some cars using uds protocol has no meas.blocks and I have to use advance measure block but I don't know which boxes I have to check to see load specs
    Is it soot measure and soot calculated?

  2. #2
    VCDS Distributor Boki Ar's Avatar
    Join Date
    Oct 2014
    Location
    Arandjelovac, Serbia
    Posts
    1,218
    Post Thanks / Like
    Please activate account https://diagnostics.vis4vag.com/ and see procedure.

    Best regards,

    Boyan

  3. #3
    Verified VCDS User
    Join Date
    Jan 2020
    Location
    Israel
    Posts
    28
    Post Thanks / Like
    i checked the procedure but sadly i didnt find the values in adv measurements

  4. #4
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    27,020
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by khaledabdulaziz View Post
    i checked the procedure but sadly i didnt find the values in adv measurements
    Please post an Auto-Scan from a car you have this question about so we can look to see what measuring values are available in that specific ECU.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •