Dpf regeneration

   #1  

khaledabdulaziz

Verified VCDS User
Verified
Joined
Jan 11, 2020
Messages
274
Reaction score
37
Location
Israel
VCDS Serial number
C?ID=394371
So I read about dpf regeneration (cleaning) on wiki.ross-tech
And I read this sentence
*Particle Filter Load below Specification (see MVB 108.2/3 -or- 241.2/3 VCDS should give the specified values)*
But some cars using uds protocol has no meas.blocks and I have to use advance measure block but I don't know which boxes I have to check to see load specs
Is it soot measure and soot calculated?
 
   #3  

khaledabdulaziz

Verified VCDS User
Verified
Joined
Jan 11, 2020
Messages
274
Reaction score
37
Location
Israel
VCDS Serial number
C?ID=394371
i checked the procedure but sadly i didnt find the values in adv measurements
 
   #4  

Uwe

Benevolent Dictator
Administrator
Joined
Jan 29, 2014
Messages
48,925
Reaction score
33,653
Location
USA
VCDS Serial number
HC100001
Back
Top