Good day:
I had an issue with the front TPMS and I took it to the tire shop. They replaced it. They say that it should auto program itself. It hasn't.
I accessed the tire pressure module and these are the results:
I am playing with the module and it seems that the sensors can give you more than the pressure, they can give you temperature, pressure, position and more.
I need assistance with the following:
My TPMS light is on.
There is a message stating tire pressure too low but the pressure is fine on all tires.
My assumption is that the sensors need to be programmed.
Any help is appreciatted
I had an issue with the front TPMS and I took it to the tire shop. They replaced it. They say that it should auto program itself. It hasn't.
I accessed the tire pressure module and these are the results:
Code:
Monday,03,February,2020,13:08:22:38365
VCDS Version: Release 19.6.2 (x64) Running on Windows 10 x64
www.Ross-Tech.com
Address 65: Tire Pressure Labels: 3C0-959-433-65.lbl
Control Module Part Number: 1K0 959 433 CD HW: 1K0 959 433 CD
Component and/or Version: RDK 0420
Software Coding: 0100101
Work Shop Code: WSC 12345 123 12345
VCID: F4A47E66972E72EF33-80A0
2 Faults Found:
01521 - Sensor for Tire Pressure
004 - No Signal/Communication
Freeze Frame:
Fault Status: 01100100
Fault Priority: 4
Fault Frequency: 1
Reset counter: 153
Mileage: 395530 km
Time Indication: 0
Date: 2000.00.00
Time: 01:02:57
01487 - System Function Test
005 - No or Incorrect Basic Setting / Adaptation
Freeze Frame:
Fault Status: 01100101
Fault Priority: 6
Fault Frequency: 1
Reset counter: 255
Mileage: 395530 km
Time Indication: 0
Date: 2000.00.00
Time: 01:05:39
I am playing with the module and it seems that the sensors can give you more than the pressure, they can give you temperature, pressure, position and more.
Code:
Monday,03,February,2020,13:17:01:38365
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 19.6.2.0 (x64) HEX-NET CB: 0.4508.4
Data version: 20190930 DS308.0
www.Ross-Tech.com
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Address 65: Tire Pressure (1K0 959 433 CD)
13:16:42
Wheel Pressure (actual)
Wheel Pressure (actual)
Wheel Pressure (actual)
2.47 bar Wheel Pressure (actual)
14.0°C Wheel 1
15.2°C Wheel 2
40.0°C Wheel 3
15.2°C Wheel 4
teilbel. Current Load
Reifen-Satz 1 Current Tire Set
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Address 65: Tire Pressure (1K0 959 433 CD)
13:17:03
Wheel Pressure (actual)
Wheel Pressure (actual)
Wheel Pressure (actual)
2.47 bar Wheel Pressure (actual)
14.0°C Wheel 1
15.2°C Wheel 2
40.0°C Wheel 3
15.2°C Wheel 4
teilbel. Current Load
Reifen-Satz 1 Current Tire Set
I need assistance with the following:
My TPMS light is on.
There is a message stating tire pressure too low but the pressure is fine on all tires.
My assumption is that the sensors need to be programmed.
Any help is appreciatted
Last edited by a moderator: