^^^Hbuk: Hi.
hmm...... the words bolded in your instruction below may be greatly exaggerated!!!
Code:
Module 09
Long coding: No long coding at all needed on this module.. I was really surprised by this!!!!
I'm not familiar with Audi TT 8S, but the vehicle appears to have a not uncommon platform . I suspect therefor that the original author of your instructions was "surprised" because the that pertained to the instruction was the newer type which contained no long code. Your does indeed appear to have a live and healthy long code.
Here's the code for the pertinent Byte:
Byte 2, Bits 0-2 (Advanced Highbeam control)
Halogen=hex0
Halogen_main_beam_assist=hex1
Xenon_AFS=hex2,
Xenon_AFS_and_main_beam_assist=hex3
Bi-xenon_AFS=hex4
Bi-xenon_AFS_and_main_beam_assist=hex5
Bi-xenon_AFS_and_MDF_GLW= hex6
Your setting for Byte 2 is Hex4C (or Binary 01001
100) - so using my list, your car appears to have HiDs because Bits 0 -2 have a value of hex4. Perhaps you might try changing this to 01001
101, which equals Hex
4D).
Don
PS: I'm not sure if making this change also means that you will lose the current headlight calibration - if so, some time spent in Basic Settings for the may be needed
PPS: Has this car been tuned?