Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: 2003 VW Beetle Conv - 01179 - Incorrect Key Programming

  1. #1
    Verified VCDS User
    Join Date
    Feb 2017
    Location
    USA
    Posts
    6
    Post Thanks / Like

    2003 VW Beetle Conv - 01179 - Incorrect Key Programming

    Hello,

    I'm original owner of this car and everything worked perfectly until this keyless issue. Looking for guidance to resolve.

    Beetle is exercised regularly but had sat resting in garage for a few weeks over the holidays.
    When tried to start it after long rest discovered the 5 year old DieHard battery had died.
    Replaced the battery and everything works _except_ keyless entry!?
    Have original key fobs and car does not respond to either remote.

    Tried re-programing keyless procedure in owners manual few times but no work.

    Got out the trusty VCDS and tried reprogramming keyless using VCDS video: https://www.youtube.com/watch?v=qiYPmebh0fg

    still no work!
    found fault 01179 - Incorrect Key Programming and cleared it then retried VCDS method again but no response from car to remote.
    and fault 01179 came back!
    clear fault, retry VCDS method, no response 01179 is back
    repeat a few more times carefully checking the steps, still no response 01179 comes back


    is there some different VCDS procedure that works for these older cars after replacing a dead car battery?

    here's my scan

    Code:
    Friday,10,January,2020,18:07:52:24453
    VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x86
    VCDS Version: 19.6.2.0  HEX-V2 CB: 0.4508.4
    Data version: 20190930 DS308.0
    www.Ross-Tech.com
    
    
    VIN: 3VWCK21Y53M3xxxxx   License Plate: 
    
    
    Chassis Type: 1Y (1Y - VW New Beetle Cab (2003 > 2010))
    Scan: 01 02 03 08 15 17 19 25 26 29 35 37 39 46 54 56 65 75
     
    VIN: 3VWCK21Y53M3xxxxx   Mileage: 250120km-155417miles
    -------------------------------------------------------------------------------
    Address 01: Engine        Labels: None
       Part No: 06A 906 032 KC
       Component: 2l ULEV NB-C A6 G   4795  
       Coding: 00003
       Shop #: WSC 00066  
       VCID: 698CB718106C1A1F7E9-513C
       3VWCK21Y53M301580     VWZ5Z0B9228194
    
    No fault code found.
    Readiness: 0000 0000
    
    -------------------------------------------------------------------------------
    Address 02: Auto Trans        Labels: 09G-927-750.clb
       Part No: 09G 927 750 N
       Component: AQ 250 6F           0302  
       Coding: 0000008
       Shop #: WSC 00000 000 00000
       VCID: 3C223E4C2A7E5FB7D5F-513C
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 03: ABS Brakes        Labels: 1C0-907-37x-ABS.lbl
       Part No: 1C0 907 379 L
       Component: ABS FRONT MK60      0101  
       Coding: 0004097
       Shop #: WSC 00066 000 00000
       VCID: 33301570072090CF045-513C
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 15: Airbags        Labels: 1T0-909-605.lbl
       Part No: 6Q0 909 605 E
       Component: 08 AIRBAG VW7       0418  
       Coding: 0012344
       Shop #: WSC 00066 000 00000
       VCID: 392C2758254C6A9FCE9-513C
    
    1 Fault Found:
    00532 - Supply Voltage B+ 
                002 - Lower Limit Exceeded - Intermittent
    
    -------------------------------------------------------------------------------
    Address 17: Instruments        Labels: 1C0-920-x4x.lbl
       Part No: 1C0 920 941 L
       Component: KOMBI+WEGFAHRS. M73 V03  
       Coding: 03234
       Shop #: WSC 00000  
       VCID: 290CF718D0ECDA1FBE9-4B00
       3VWCK21Y53M301580     VWZ5Z0B9228194
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 19: CAN Gateway        Labels: 6N0-909-901-19.lbl
       Part No: 6N0 909 901 
       Component: Gateway K<->CAN    V032  
       Coding: 00006
       Shop #: WSC 00066  
       VCID: 70BADA7C33B6EBD7397-4B00
    
    No fault code found.
    
    -------------------------------------------------------------------------------
    Address 26: Auto Roof        Labels: 1Y0-959-255-HYD.lbl
       Part No: 1Y0 959 255 
       Component:  VSG  NBC       ?  
       Shop #: WSC 00000 000 00000
       VCID: 7DA4F34871E496BFA21-513C
    
    1 Fault Found:
    01336 - Company Data Bus for Comfort System 
                014 - Defective - Intermittent
    
    -------------------------------------------------------------------------------
    Address 46: Central Conv.        Labels: 1C0-959-799.lbl
       Part No: 1C0 959 799 G
       Component: 6J Komfortger?t HLO 0004  
       Coding: 00256
       Shop #: WSC 00066  
       VCID: 3B203D502A70588FDC5-4B00
    
       Subsystem 1 - Part No: 1Y1959801
       Component: 6J T?rsteuer.FS KLO 0001  
    
       Subsystem 2 - Part No: 1Y1959802A
       Component: 6J T?rsteuer.BF KLO 0001  
    
       Subsystem 3 - Part No: 1Y0959811
       Component: 6J T?rsteuer.HL KLO 0001  
    
       Subsystem 4 - Part No: 1Y0959812
       Component: 6J T?rsteuer.HR KLO 0001  
    
    1 Fault Found:
    01179 - Incorrect Key Programming 
                35-00 - -
    
    -------------------------------------------------------------------------------
    Address 56: Radio        Labels: 1J0-035-18x-56.lbl
       Part No: 1C0 035 180 E
       Component:  RADIO 3CP         0002  
       Coding: 06401
       Shop #: WSC 00066  
       VCID: 1A6ED8D4858A4187273-4B00
    
    No fault code found.
    
    End----------(Elapsed Time: 03:51, VBatt start/end: 12.5V/12.4V)-----------
    Last edited by Uwe; 01-15-2020 at 06:47 PM. Reason: Relocated upper CODE tag

  2. #2
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    27,038
    Post Thanks / Like
    Blog Entries
    1
    Did you mean to post a link to this video?
    https://www.youtube.com/watch?v=6ODt94_d6Cw

    Are the batteries in the remotes good?

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  3. Likes Jack@European_Parts liked this post
  4. #3
    Verified VCDS User
    Join Date
    Feb 2017
    Location
    USA
    Posts
    6
    Post Thanks / Like
    Quote Originally Posted by Uwe View Post
    Did you mean to post a link to this video?
    https://www.youtube.com/watch?v=6ODt94_d6Cw

    Are the batteries in the remotes good?

    -Uwe-


    Arggh, yes d6Cw is indeed the video I was following to try and rematch the remotes.
    In my search for a solution I was updating everything and must have pasted in wrong you tube link.


    Already replaced batteries in both remotes.
    Checked old and new remote batteries with voltmeter just to be sure.

  5. Likes Uwe, Jack@European_Parts liked this post
  6. #4
    Professional User Jetta ,97's Avatar
    Join Date
    Apr 2014
    Location
    Dallas (McKinney) ,TX ,USA
    Posts
    714
    Post Thanks / Like
    Does it your car lock/unlock all doors and make beep when you insert key in door lock?
    Master Technician for German cars
    Immobilizer/ECU
    /Cluster Programing (Used or NEW) and Key Programing
    Mk6 COLOR cluster in Mk5 -CLIK

    email : marinmm2001@gmail.com

  7. Likes Uwe, Jack@European_Parts liked this post
  8. #5
    Verified VCDS User
    Join Date
    Feb 2017
    Location
    USA
    Posts
    6
    Post Thanks / Like
    Quote Originally Posted by Jetta ,97 View Post
    Does it your car lock/unlock all doors and make beep when you insert key in door lock?
    Yes.
    manual lock using key in drivers dorr locks all doors, lights flash and car beeps.

  9. #6
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    18,639
    Post Thanks / Like
    Did you try recoding CCM and than a default of CCM to clear keys and battery reboot of everything?

    Did you verify clicker is seen by antenna in VCDS blocks?

    Are you sure batteries are not installed wrong in remotes?
    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic! No Written record, AUTO-SCAN or Appointment = NO HELP!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email or call facility for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  10. Likes Uwe liked this post
  11. #7
    Verified VCDS User
    Join Date
    Feb 2017
    Location
    USA
    Posts
    6
    Post Thanks / Like
    Quote Originally Posted by Jack@European_Parts View Post
    Did you try recoding CCM and than a default of CCM to clear keys and battery reboot of everything?

    Did you verify clicker is seen by antenna in VCDS blocks?

    Are you sure batteries are not installed wrong in remotes?
    yes, remote batteries are oriented correctly, LED blinks when push button

    I disconnected the car battery, touched + and - cables for a bit and reconnected no luck

    how do I verify clicker is seen by antenna in VCDS blocks?

    I dont know what you mean by recoding CCM and than a default of CCM to clear keys

  12. #8
    Benevolent Dictator Uwe's Avatar
    Join Date
    Jan 2014
    Location
    Earth
    Posts
    27,038
    Post Thanks / Like
    Blog Entries
    1
    Quote Originally Posted by rntrary View Post
    how do I verify clicker is seen by antenna in VCDS blocks?
    Look at MVBs 014 and 015 with VCDS while pressing buttons on the remotes to see if any of the fields change at all.

    -Uwe-
    The engineering problems are likely insurmountable. It would be like proposing to land a rocket booster section on a barge floating in the middle of the ocean.

  13. Likes Jack@European_Parts, Jetta ,97 liked this post
  14. #9
    NostraJackAss Jack@European_Parts's Avatar
    Join Date
    Jan 2014
    Location
    1001 State Route 17K Montgomery New York 12549
    Posts
    18,639
    Post Thanks / Like
    Also are you setting the remote count in adaption & to be freshly attempted to be adapted after clearing and saving the new remote count after saving to zero?
    European Parts Emporium/Performance / Immobilizer Solutions EPE
    Certified Master Trained NY/BAR/BAD 7076062/ASE/SAE/NASTF Legal Factory Authorized/Licensed GeKo/FaZit # 403738
    Specializing in Custom Services IE: "welding-fabrication" / EPA-SMOG Update or Pass-Thru-Programming / Data Transfer / Immobilizers & OEM Quality Parts
    Above Magic! No Written record, AUTO-SCAN or Appointment = NO HELP!
    www.FixMyEuro.com <<<<<CLICK HERE! or vwemporium@aol.com ( JPPSG & Unverified members need not PM me & Please don't email or call facility for free tech support...use the forum )
    Getting you CONTROL again of your property - TAKE IT! In Conjunction with.........

  15. #10
    Verified VCDS User
    Join Date
    Feb 2017
    Location
    USA
    Posts
    6
    Post Thanks / Like
    Quote Originally Posted by Jack@European_Parts View Post
    Also are you setting the remote count in adaption & to be freshly attempted to be adapted after clearing and saving the new remote count after saving to zero?

    I got it to work with following variation in video d6Cw.
    After select 46, 10 adatp, goto chan 01 (skip chan 00)
    click on the displayed chan 01 and read becomes highlighted
    click on highlighted read
    enter new value (2)
    test, save and are you sure
    then click lock button on each remote
    tadah it works !

    perhaps the d6Cw video needs to be updated
    Last edited by rntrary; 01-18-2020 at 10:54 AM.

  16. Likes Jack@European_Parts, Uwe liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •